ipq806x: fix freeze in PCIe code when booting with an old u-boot
authorFelix Fietkau <nbd@openwrt.org>
Tue, 4 Aug 2015 23:10:03 +0000 (23:10 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 4 Aug 2015 23:10:03 +0000 (23:10 +0000)
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.

In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller

Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46557

target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
target/linux/ipq806x/patches-3.18/114-pcie-add-ctlr-init.patch [new file with mode: 0644]
target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch [new file with mode: 0644]
target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
target/linux/ipq806x/patches-4.1/114-pcie-add-ctlr-init.patch [new file with mode: 0644]
target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch [new file with mode: 0644]
target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch

index bdc91fb6b7b5bb4187a8a50e0f8972a9fc5d2ed6..ed660473276f1d4d1927823a4484ac3e16e898b1 100644 (file)
@@ -15,14 +15,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -35,6 +35,22 @@
+@@ -35,6 +35,24 @@
                                bias-disable;
                        };
  
 +                      pcie0_pins: pcie0_pinmux {
 +                              mux {
 +                                      pins = "gpio3";
-+                                      drive-strength = <2>;
++                                      function = "pcie1_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -30,7 +31,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie1_pins: pcie1_pinmux {
 +                              mux {
 +                                      pins = "gpio48";
-+                                      drive-strength = <2>;
++                                      function = "pcie2_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -38,7 +40,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -138,5 +154,19 @@
+@@ -138,5 +156,19 @@
                usb30@1 {
                        status = "ok";
                };
@@ -60,14 +62,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -30,6 +30,30 @@
+@@ -30,6 +30,33 @@
                                bias-disable;
                        };
  
 +                      pcie0_pins: pcie0_pinmux {
 +                              mux {
 +                                      pins = "gpio3";
-+                                      drive-strength = <2>;
++                                      function = "pcie1_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -75,7 +78,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie1_pins: pcie1_pinmux {
 +                              mux {
 +                                      pins = "gpio48";
-+                                      drive-strength = <2>;
++                                      function = "pcie2_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -83,7 +87,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie2_pins: pcie2_pinmux {
 +                              mux {
 +                                      pins = "gpio63";
-+                                      drive-strength = <2>;
++                                      function = "pcie3_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -91,7 +96,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -128,5 +152,26 @@
+@@ -128,5 +155,26 @@
                usb30@1 {
                        status = "ok";
                };
diff --git a/target/linux/ipq806x/patches-3.18/114-pcie-add-ctlr-init.patch b/target/linux/ipq806x/patches-3.18/114-pcie-add-ctlr-init.patch
new file mode 100644 (file)
index 0000000..11c9810
--- /dev/null
@@ -0,0 +1,278 @@
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -29,8 +29,53 @@
+ #include "pcie-designware.h"
++/* DBI registers */
++#define PCIE20_CAP                            0x70
++#define PCIE20_CAP_LINKCTRLSTATUS             (PCIE20_CAP + 0x10)
++
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0               0x818
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1               0x81c
++
++#define PCIE20_PLR_IATU_VIEWPORT              0x900
++#define PCIE20_PLR_IATU_REGION_OUTBOUND               (0x0 << 31)
++#define PCIE20_PLR_IATU_REGION_INDEX(x)               (x << 0)
++
++#define PCIE20_PLR_IATU_CTRL1                 0x904
++#define PCIE20_PLR_IATU_TYPE_CFG0             (0x4 << 0)
++#define PCIE20_PLR_IATU_TYPE_MEM              (0x0 << 0)
++
++#define PCIE20_PLR_IATU_CTRL2                 0x908
++#define PCIE20_PLR_IATU_ENABLE                        BIT(31)
++
++#define PCIE20_PLR_IATU_LBAR                  0x90C
++#define PCIE20_PLR_IATU_UBAR                  0x910
++#define PCIE20_PLR_IATU_LAR                   0x914
++#define PCIE20_PLR_IATU_LTAR                  0x918
++#define PCIE20_PLR_IATU_UTAR                  0x91c
++
++#define MSM_PCIE_DEV_CFG_ADDR                 0x01000000
++
++/* PARF registers */
++#define PCIE20_PARF_PCS_DEEMPH                        0x34
++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x)          (x << 16)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)    (x << 8)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)      (x << 0)
++
++#define PCIE20_PARF_PCS_SWING                 0x38
++#define PCS_SWING_TX_SWING_FULL(x)            (x << 8)
++#define PCS_SWING_TX_SWING_LOW(x)             (x << 0)
++
+ #define PCIE20_PARF_PHY_CTRL                  0x40
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK     (0x1f << 16)
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)               (x << 16)
++
+ #define PCIE20_PARF_PHY_REFCLK                        0x4C
++#define REF_SSP_EN                            BIT(16)
++#define REF_USE_PAD                           BIT(12)
++
++#define PCIE20_PARF_CONFIG_BITS                       0x50
++#define PHY_RX0_EQ(x)                         (x << 24)
++
+ #define PCIE20_PARF_DBI_BASE_ADDR             0x168
+ #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE               0x16c
+ #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT     0x178
+@@ -39,9 +84,6 @@
+ #define PCIE20_ELBI_SYS_STTS                  0x08
+ #define XMLH_LINK_UP                          BIT(10)
+-#define PCIE20_CAP                            0x70
+-#define PCIE20_CAP_LINKCTRLSTATUS             (PCIE20_CAP + 0x10)
+-
+ #define PERST_DELAY_MIN_US                    1000
+ #define PERST_DELAY_MAX_US                    1005
+@@ -56,14 +98,18 @@ struct qcom_pcie_resources_v0 {
+       struct clk *iface_clk;
+       struct clk *core_clk;
+       struct clk *phy_clk;
++      struct clk *aux_clk;
++      struct clk *ref_clk;
+       struct reset_control *pci_reset;
+       struct reset_control *axi_reset;
+       struct reset_control *ahb_reset;
+       struct reset_control *por_reset;
+       struct reset_control *phy_reset;
++      struct reset_control *ext_reset;
+       struct regulator *vdda;
+       struct regulator *vdda_phy;
+       struct regulator *vdda_refclk;
++      uint8_t phy_tx0_term_offset;
+ };
+ struct qcom_pcie_resources_v1 {
+@@ -156,10 +202,13 @@ static void qcom_pcie_disable_resources_
+       reset_control_assert(res->axi_reset);
+       reset_control_assert(res->ahb_reset);
+       reset_control_assert(res->por_reset);
+-      reset_control_assert(res->pci_reset);
++      reset_control_assert(res->phy_reset);
++      reset_control_assert(res->ext_reset);
+       clk_disable_unprepare(res->iface_clk);
+       clk_disable_unprepare(res->core_clk);
+       clk_disable_unprepare(res->phy_clk);
++      clk_disable_unprepare(res->aux_clk);
++      clk_disable_unprepare(res->ref_clk);
+       regulator_disable(res->vdda);
+       regulator_disable(res->vdda_phy);
+       regulator_disable(res->vdda_refclk);
+@@ -201,6 +250,12 @@ static int qcom_pcie_enable_resources_v0
+               goto err_vdda_phy;
+       }
++      ret = reset_control_deassert(res->ext_reset);
++      if (ret) {
++              dev_err(dev, "cannot assert ext reset\n");
++              goto err_reset_ext;
++      }
++
+       ret = clk_prepare_enable(res->iface_clk);
+       if (ret) {
+               dev_err(dev, "cannot prepare/enable iface clock\n");
+@@ -219,6 +274,18 @@ static int qcom_pcie_enable_resources_v0
+               goto err_clk_phy;
+       }
++      ret = clk_prepare_enable(res->aux_clk);
++      if (ret) {
++              dev_err(dev, "cannot prepare/enable aux clock\n");
++              goto err_clk_aux;
++      }
++
++      ret = clk_prepare_enable(res->ref_clk);
++      if (ret) {
++              dev_err(dev, "cannot prepare/enable ref clock\n");
++              goto err_clk_ref;
++      }
++
+       ret = reset_control_deassert(res->ahb_reset);
+       if (ret) {
+               dev_err(dev, "cannot deassert ahb reset\n");
+@@ -228,12 +295,18 @@ static int qcom_pcie_enable_resources_v0
+       return 0;
+ err_reset_ahb:
++      clk_disable_unprepare(res->ref_clk);
++err_clk_ref:
++      clk_disable_unprepare(res->aux_clk);
++err_clk_aux:
+       clk_disable_unprepare(res->phy_clk);
+ err_clk_phy:
+       clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+       clk_disable_unprepare(res->iface_clk);
+ err_iface:
++      reset_control_assert(res->ext_reset);
++err_reset_ext:
+       regulator_disable(res->vdda_phy);
+ err_vdda_phy:
+       regulator_disable(res->vdda_refclk);
+@@ -329,6 +402,14 @@ static int qcom_pcie_get_resources_v0(st
+       if (IS_ERR(res->phy_clk))
+               return PTR_ERR(res->phy_clk);
++      res->aux_clk = devm_clk_get(dev, "aux");
++      if (IS_ERR(res->aux_clk))
++              return PTR_ERR(res->aux_clk);
++
++      res->ref_clk = devm_clk_get(dev, "ref");
++      if (IS_ERR(res->ref_clk))
++              return PTR_ERR(res->ref_clk);
++
+       res->pci_reset = devm_reset_control_get(dev, "pci");
+       if (IS_ERR(res->pci_reset))
+               return PTR_ERR(res->pci_reset);
+@@ -349,6 +430,14 @@ static int qcom_pcie_get_resources_v0(st
+       if (IS_ERR(res->phy_reset))
+               return PTR_ERR(res->phy_reset);
++      res->ext_reset = devm_reset_control_get(dev, "ext");
++      if (IS_ERR(res->ext_reset))
++              return PTR_ERR(res->ext_reset);
++
++      if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
++                              &res->phy_tx0_term_offset))
++              res->phy_tx0_term_offset = 0;
++
+       return 0;
+ }
+@@ -461,6 +550,57 @@ err_res:
+       qcom_pcie_disable_resources_v1(pcie);
+ }
++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
++{
++      struct pcie_port *pp = &pcie->pp;
++
++      /*
++       * program and enable address translation region 0 (device config
++       * address space); region type config;
++       * axi config address range to device config address range
++       */
++      writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++             PCIE20_PLR_IATU_REGION_INDEX(0),
++             pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
++
++      writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
++      writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
++      writel(pp->cfg0_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
++      writel((pp->cfg0_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
++      writel((pp->cfg0_mod_base + pp->cfg0_size - 1),
++             pcie->dbi + PCIE20_PLR_IATU_LAR);
++      writel(busdev, pcie->dbi + PCIE20_PLR_IATU_LTAR);
++      writel(0, pcie->dbi + PCIE20_PLR_IATU_UTAR);
++}
++
++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
++{
++      struct pcie_port *pp = &pcie->pp;
++
++      /*
++       * program and enable address translation region 2 (device resource
++       * address space); region type memory;
++       * axi device bar address range to device bar address range
++       */
++      writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++             PCIE20_PLR_IATU_REGION_INDEX(2),
++             pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
++
++      writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
++      writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
++      writel(pp->mem_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
++      writel((pp->mem_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
++      writel(pp->mem_mod_base + pp->mem_size - 1,
++             pcie->dbi + PCIE20_PLR_IATU_LAR);
++      writel(pp->mem_bus_addr, pcie->dbi + PCIE20_PLR_IATU_LTAR);
++      writel(upper_32_bits(pp->mem_bus_addr),
++             pcie->dbi + PCIE20_PLR_IATU_UTAR);
++
++      /* 1K PCIE buffer setting */
++      writel(0x3, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
++      writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
++}
++
+ static void qcom_pcie_host_init_v0(struct pcie_port *pp)
+ {
+       struct qcom_pcie *pcie = to_qcom_pcie(pp);
+@@ -476,9 +616,26 @@ static void qcom_pcie_host_init_v0(struc
+       writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
+-      /* enable external reference clock */
+-      writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
++      /* Set Tx termination offset */
++      writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
++                    PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
++                    PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
++
++      /* PARF programming */
++      writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
++             PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
++             PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
++             pcie->parf + PCIE20_PARF_PCS_DEEMPH);
++      writel(PCS_SWING_TX_SWING_FULL(0x78) |
++             PCS_SWING_TX_SWING_LOW(0x78),
++             pcie->parf + PCIE20_PARF_PCS_SWING);
++      writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
++
++      /* Enable reference clock */
++      writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
++                    REF_USE_PAD, REF_SSP_EN);
++      /* De-assert PHY, PCIe, POR and AXI resets */
+       ret = reset_control_deassert(res->phy_reset);
+       if (ret) {
+               dev_err(dev, "cannot deassert phy reset\n");
+@@ -517,6 +674,9 @@ static void qcom_pcie_host_init_v0(struc
+       if (ret)
+               goto err;
++      qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
++      qcom_pcie_prog_viewport_mem2_outbound(pcie);
++
+       return;
+ err:
+       qcom_ep_reset_assert(pcie);
diff --git a/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch b/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch
new file mode 100644 (file)
index 0000000..13ff921
--- /dev/null
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -336,15 +336,21 @@
+                       clocks = <&gcc PCIE_A_CLK>,
+                                <&gcc PCIE_H_CLK>,
+-                               <&gcc PCIE_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_PHY_CLK>,
++                               <&gcc PCIE_AUX_CLK>,
++                               <&gcc PCIE_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_ACLK_RESET>,
+                                <&gcc PCIE_HCLK_RESET>,
+                                <&gcc PCIE_POR_RESET>,
+                                <&gcc PCIE_PCI_RESET>,
+-                               <&gcc PCIE_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_PHY_RESET>,
++                               <&gcc PCIE_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
+@@ -377,15 +383,21 @@
+                       clocks = <&gcc PCIE_1_A_CLK>,
+                                <&gcc PCIE_1_H_CLK>,
+-                               <&gcc PCIE_1_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_1_PHY_CLK>,
++                               <&gcc PCIE_1_AUX_CLK>,
++                               <&gcc PCIE_1_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_1_ACLK_RESET>,
+                                <&gcc PCIE_1_HCLK_RESET>,
+                                <&gcc PCIE_1_POR_RESET>,
+                                <&gcc PCIE_1_PCI_RESET>,
+-                               <&gcc PCIE_1_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_1_PHY_RESET>,
++                               <&gcc PCIE_1_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
+@@ -418,15 +430,21 @@
+                       clocks = <&gcc PCIE_2_A_CLK>,
+                                <&gcc PCIE_2_H_CLK>,
+-                               <&gcc PCIE_2_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_2_PHY_CLK>,
++                               <&gcc PCIE_2_AUX_CLK>,
++                               <&gcc PCIE_2_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_2_ACLK_RESET>,
+                                <&gcc PCIE_2_HCLK_RESET>,
+                                <&gcc PCIE_2_POR_RESET>,
+                                <&gcc PCIE_2_PCI_RESET>,
+-                               <&gcc PCIE_2_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_2_PHY_RESET>,
++                               <&gcc PCIE_2_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
index 851682a9aa31c59c68a5e35f0d6392d3b90aeae6..e1b41d80dc8aeec9e0237be016478da36b896156 100644 (file)
@@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
        };
  
        chosen {
-@@ -59,6 +60,15 @@
+@@ -61,6 +62,15 @@
                                        bias-none;
                                };
                        };
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -168,5 +178,33 @@
+@@ -170,5 +180,33 @@
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
                };
@@ -82,7 +82,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
        };
  
        chosen {
-@@ -62,6 +63,15 @@
+@@ -65,6 +66,15 @@
                                        bias-none;
                                };
                        };
@@ -98,7 +98,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi2: gsbi@12480000 {
-@@ -173,5 +183,44 @@
+@@ -176,5 +186,44 @@
                        pinctrl-0 = <&pcie2_pins>;
                        pinctrl-names = "default";
                };
index df96ad5878516f2f5cd5621bdfdf29a2f0365622..fc2fe0a4600591e46943a6603a7e4af559eb5980 100644 (file)
@@ -15,14 +15,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -35,6 +35,22 @@
+@@ -35,6 +35,24 @@
                                bias-disable;
                        };
  
 +                      pcie0_pins: pcie0_pinmux {
 +                              mux {
 +                                      pins = "gpio3";
-+                                      drive-strength = <2>;
++                                      function = "pcie1_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -30,7 +31,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie1_pins: pcie1_pinmux {
 +                              mux {
 +                                      pins = "gpio48";
-+                                      drive-strength = <2>;
++                                      function = "pcie2_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -38,7 +40,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -114,5 +130,19 @@
+@@ -114,5 +132,19 @@
                sata@29000000 {
                        status = "ok";
                };
@@ -60,14 +62,15 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -30,6 +30,30 @@
+@@ -30,6 +30,33 @@
                                bias-disable;
                        };
  
 +                      pcie0_pins: pcie0_pinmux {
 +                              mux {
 +                                      pins = "gpio3";
-+                                      drive-strength = <2>;
++                                      function = "pcie1_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -75,7 +78,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie1_pins: pcie1_pinmux {
 +                              mux {
 +                                      pins = "gpio48";
-+                                      drive-strength = <2>;
++                                      function = "pcie2_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -83,7 +87,8 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 +                      pcie2_pins: pcie2_pinmux {
 +                              mux {
 +                                      pins = "gpio63";
-+                                      drive-strength = <2>;
++                                      function = "pcie3_rst";
++                                      drive-strength = <12>;
 +                                      bias-disable;
 +                              };
 +                      };
@@ -91,7 +96,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -128,5 +152,26 @@
+@@ -128,5 +155,26 @@
                usb30@1 {
                        status = "ok";
                };
diff --git a/target/linux/ipq806x/patches-4.1/114-pcie-add-ctlr-init.patch b/target/linux/ipq806x/patches-4.1/114-pcie-add-ctlr-init.patch
new file mode 100644 (file)
index 0000000..11c9810
--- /dev/null
@@ -0,0 +1,278 @@
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -29,8 +29,53 @@
+ #include "pcie-designware.h"
++/* DBI registers */
++#define PCIE20_CAP                            0x70
++#define PCIE20_CAP_LINKCTRLSTATUS             (PCIE20_CAP + 0x10)
++
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0               0x818
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1               0x81c
++
++#define PCIE20_PLR_IATU_VIEWPORT              0x900
++#define PCIE20_PLR_IATU_REGION_OUTBOUND               (0x0 << 31)
++#define PCIE20_PLR_IATU_REGION_INDEX(x)               (x << 0)
++
++#define PCIE20_PLR_IATU_CTRL1                 0x904
++#define PCIE20_PLR_IATU_TYPE_CFG0             (0x4 << 0)
++#define PCIE20_PLR_IATU_TYPE_MEM              (0x0 << 0)
++
++#define PCIE20_PLR_IATU_CTRL2                 0x908
++#define PCIE20_PLR_IATU_ENABLE                        BIT(31)
++
++#define PCIE20_PLR_IATU_LBAR                  0x90C
++#define PCIE20_PLR_IATU_UBAR                  0x910
++#define PCIE20_PLR_IATU_LAR                   0x914
++#define PCIE20_PLR_IATU_LTAR                  0x918
++#define PCIE20_PLR_IATU_UTAR                  0x91c
++
++#define MSM_PCIE_DEV_CFG_ADDR                 0x01000000
++
++/* PARF registers */
++#define PCIE20_PARF_PCS_DEEMPH                        0x34
++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x)          (x << 16)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)    (x << 8)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)      (x << 0)
++
++#define PCIE20_PARF_PCS_SWING                 0x38
++#define PCS_SWING_TX_SWING_FULL(x)            (x << 8)
++#define PCS_SWING_TX_SWING_LOW(x)             (x << 0)
++
+ #define PCIE20_PARF_PHY_CTRL                  0x40
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK     (0x1f << 16)
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)               (x << 16)
++
+ #define PCIE20_PARF_PHY_REFCLK                        0x4C
++#define REF_SSP_EN                            BIT(16)
++#define REF_USE_PAD                           BIT(12)
++
++#define PCIE20_PARF_CONFIG_BITS                       0x50
++#define PHY_RX0_EQ(x)                         (x << 24)
++
+ #define PCIE20_PARF_DBI_BASE_ADDR             0x168
+ #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE               0x16c
+ #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT     0x178
+@@ -39,9 +84,6 @@
+ #define PCIE20_ELBI_SYS_STTS                  0x08
+ #define XMLH_LINK_UP                          BIT(10)
+-#define PCIE20_CAP                            0x70
+-#define PCIE20_CAP_LINKCTRLSTATUS             (PCIE20_CAP + 0x10)
+-
+ #define PERST_DELAY_MIN_US                    1000
+ #define PERST_DELAY_MAX_US                    1005
+@@ -56,14 +98,18 @@ struct qcom_pcie_resources_v0 {
+       struct clk *iface_clk;
+       struct clk *core_clk;
+       struct clk *phy_clk;
++      struct clk *aux_clk;
++      struct clk *ref_clk;
+       struct reset_control *pci_reset;
+       struct reset_control *axi_reset;
+       struct reset_control *ahb_reset;
+       struct reset_control *por_reset;
+       struct reset_control *phy_reset;
++      struct reset_control *ext_reset;
+       struct regulator *vdda;
+       struct regulator *vdda_phy;
+       struct regulator *vdda_refclk;
++      uint8_t phy_tx0_term_offset;
+ };
+ struct qcom_pcie_resources_v1 {
+@@ -156,10 +202,13 @@ static void qcom_pcie_disable_resources_
+       reset_control_assert(res->axi_reset);
+       reset_control_assert(res->ahb_reset);
+       reset_control_assert(res->por_reset);
+-      reset_control_assert(res->pci_reset);
++      reset_control_assert(res->phy_reset);
++      reset_control_assert(res->ext_reset);
+       clk_disable_unprepare(res->iface_clk);
+       clk_disable_unprepare(res->core_clk);
+       clk_disable_unprepare(res->phy_clk);
++      clk_disable_unprepare(res->aux_clk);
++      clk_disable_unprepare(res->ref_clk);
+       regulator_disable(res->vdda);
+       regulator_disable(res->vdda_phy);
+       regulator_disable(res->vdda_refclk);
+@@ -201,6 +250,12 @@ static int qcom_pcie_enable_resources_v0
+               goto err_vdda_phy;
+       }
++      ret = reset_control_deassert(res->ext_reset);
++      if (ret) {
++              dev_err(dev, "cannot assert ext reset\n");
++              goto err_reset_ext;
++      }
++
+       ret = clk_prepare_enable(res->iface_clk);
+       if (ret) {
+               dev_err(dev, "cannot prepare/enable iface clock\n");
+@@ -219,6 +274,18 @@ static int qcom_pcie_enable_resources_v0
+               goto err_clk_phy;
+       }
++      ret = clk_prepare_enable(res->aux_clk);
++      if (ret) {
++              dev_err(dev, "cannot prepare/enable aux clock\n");
++              goto err_clk_aux;
++      }
++
++      ret = clk_prepare_enable(res->ref_clk);
++      if (ret) {
++              dev_err(dev, "cannot prepare/enable ref clock\n");
++              goto err_clk_ref;
++      }
++
+       ret = reset_control_deassert(res->ahb_reset);
+       if (ret) {
+               dev_err(dev, "cannot deassert ahb reset\n");
+@@ -228,12 +295,18 @@ static int qcom_pcie_enable_resources_v0
+       return 0;
+ err_reset_ahb:
++      clk_disable_unprepare(res->ref_clk);
++err_clk_ref:
++      clk_disable_unprepare(res->aux_clk);
++err_clk_aux:
+       clk_disable_unprepare(res->phy_clk);
+ err_clk_phy:
+       clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+       clk_disable_unprepare(res->iface_clk);
+ err_iface:
++      reset_control_assert(res->ext_reset);
++err_reset_ext:
+       regulator_disable(res->vdda_phy);
+ err_vdda_phy:
+       regulator_disable(res->vdda_refclk);
+@@ -329,6 +402,14 @@ static int qcom_pcie_get_resources_v0(st
+       if (IS_ERR(res->phy_clk))
+               return PTR_ERR(res->phy_clk);
++      res->aux_clk = devm_clk_get(dev, "aux");
++      if (IS_ERR(res->aux_clk))
++              return PTR_ERR(res->aux_clk);
++
++      res->ref_clk = devm_clk_get(dev, "ref");
++      if (IS_ERR(res->ref_clk))
++              return PTR_ERR(res->ref_clk);
++
+       res->pci_reset = devm_reset_control_get(dev, "pci");
+       if (IS_ERR(res->pci_reset))
+               return PTR_ERR(res->pci_reset);
+@@ -349,6 +430,14 @@ static int qcom_pcie_get_resources_v0(st
+       if (IS_ERR(res->phy_reset))
+               return PTR_ERR(res->phy_reset);
++      res->ext_reset = devm_reset_control_get(dev, "ext");
++      if (IS_ERR(res->ext_reset))
++              return PTR_ERR(res->ext_reset);
++
++      if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
++                              &res->phy_tx0_term_offset))
++              res->phy_tx0_term_offset = 0;
++
+       return 0;
+ }
+@@ -461,6 +550,57 @@ err_res:
+       qcom_pcie_disable_resources_v1(pcie);
+ }
++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
++{
++      struct pcie_port *pp = &pcie->pp;
++
++      /*
++       * program and enable address translation region 0 (device config
++       * address space); region type config;
++       * axi config address range to device config address range
++       */
++      writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++             PCIE20_PLR_IATU_REGION_INDEX(0),
++             pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
++
++      writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
++      writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
++      writel(pp->cfg0_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
++      writel((pp->cfg0_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
++      writel((pp->cfg0_mod_base + pp->cfg0_size - 1),
++             pcie->dbi + PCIE20_PLR_IATU_LAR);
++      writel(busdev, pcie->dbi + PCIE20_PLR_IATU_LTAR);
++      writel(0, pcie->dbi + PCIE20_PLR_IATU_UTAR);
++}
++
++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
++{
++      struct pcie_port *pp = &pcie->pp;
++
++      /*
++       * program and enable address translation region 2 (device resource
++       * address space); region type memory;
++       * axi device bar address range to device bar address range
++       */
++      writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++             PCIE20_PLR_IATU_REGION_INDEX(2),
++             pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
++
++      writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
++      writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
++      writel(pp->mem_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
++      writel((pp->mem_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
++      writel(pp->mem_mod_base + pp->mem_size - 1,
++             pcie->dbi + PCIE20_PLR_IATU_LAR);
++      writel(pp->mem_bus_addr, pcie->dbi + PCIE20_PLR_IATU_LTAR);
++      writel(upper_32_bits(pp->mem_bus_addr),
++             pcie->dbi + PCIE20_PLR_IATU_UTAR);
++
++      /* 1K PCIE buffer setting */
++      writel(0x3, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
++      writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
++}
++
+ static void qcom_pcie_host_init_v0(struct pcie_port *pp)
+ {
+       struct qcom_pcie *pcie = to_qcom_pcie(pp);
+@@ -476,9 +616,26 @@ static void qcom_pcie_host_init_v0(struc
+       writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
+-      /* enable external reference clock */
+-      writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
++      /* Set Tx termination offset */
++      writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
++                    PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
++                    PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
++
++      /* PARF programming */
++      writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
++             PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
++             PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
++             pcie->parf + PCIE20_PARF_PCS_DEEMPH);
++      writel(PCS_SWING_TX_SWING_FULL(0x78) |
++             PCS_SWING_TX_SWING_LOW(0x78),
++             pcie->parf + PCIE20_PARF_PCS_SWING);
++      writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
++
++      /* Enable reference clock */
++      writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
++                    REF_USE_PAD, REF_SSP_EN);
++      /* De-assert PHY, PCIe, POR and AXI resets */
+       ret = reset_control_deassert(res->phy_reset);
+       if (ret) {
+               dev_err(dev, "cannot deassert phy reset\n");
+@@ -517,6 +674,9 @@ static void qcom_pcie_host_init_v0(struc
+       if (ret)
+               goto err;
++      qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
++      qcom_pcie_prog_viewport_mem2_outbound(pcie);
++
+       return;
+ err:
+       qcom_ep_reset_assert(pcie);
diff --git a/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch b/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch
new file mode 100644 (file)
index 0000000..59b7fcc
--- /dev/null
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -359,15 +359,21 @@
+                       clocks = <&gcc PCIE_A_CLK>,
+                                <&gcc PCIE_H_CLK>,
+-                               <&gcc PCIE_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_PHY_CLK>,
++                               <&gcc PCIE_AUX_CLK>,
++                               <&gcc PCIE_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_ACLK_RESET>,
+                                <&gcc PCIE_HCLK_RESET>,
+                                <&gcc PCIE_POR_RESET>,
+                                <&gcc PCIE_PCI_RESET>,
+-                               <&gcc PCIE_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_PHY_RESET>,
++                               <&gcc PCIE_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
+@@ -400,15 +406,21 @@
+                       clocks = <&gcc PCIE_1_A_CLK>,
+                                <&gcc PCIE_1_H_CLK>,
+-                               <&gcc PCIE_1_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_1_PHY_CLK>,
++                               <&gcc PCIE_1_AUX_CLK>,
++                               <&gcc PCIE_1_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_1_ACLK_RESET>,
+                                <&gcc PCIE_1_HCLK_RESET>,
+                                <&gcc PCIE_1_POR_RESET>,
+                                <&gcc PCIE_1_PCI_RESET>,
+-                               <&gcc PCIE_1_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_1_PHY_RESET>,
++                               <&gcc PCIE_1_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
+@@ -441,15 +453,21 @@
+                       clocks = <&gcc PCIE_2_A_CLK>,
+                                <&gcc PCIE_2_H_CLK>,
+-                               <&gcc PCIE_2_PHY_CLK>;
+-                      clock-names = "core", "iface", "phy";
++                               <&gcc PCIE_2_PHY_CLK>,
++                               <&gcc PCIE_2_AUX_CLK>,
++                               <&gcc PCIE_2_ALT_REF_CLK>;
++                      clock-names = "core", "iface", "phy", "aux", "ref";
++
++                      assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
++                      assigned-clock-rates = <100000000>;
+                       resets = <&gcc PCIE_2_ACLK_RESET>,
+                                <&gcc PCIE_2_HCLK_RESET>,
+                                <&gcc PCIE_2_POR_RESET>,
+                                <&gcc PCIE_2_PCI_RESET>,
+-                               <&gcc PCIE_2_PHY_RESET>;
+-                      reset-names = "axi", "ahb", "por", "pci", "phy";
++                               <&gcc PCIE_2_PHY_RESET>,
++                               <&gcc PCIE_2_EXT_RESET>;
++                      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+                       status = "disabled";
+               };
index f327050410de8f9bcd1154bd50d1db914d6718b4..d17ff446e230915d60ac8993e77a2ae767651749 100644 (file)
@@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
        };
  
        chosen {
-@@ -59,6 +60,15 @@
+@@ -61,6 +62,15 @@
                                        bias-none;
                                };
                        };
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -144,5 +154,33 @@
+@@ -146,5 +156,33 @@
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
                };
@@ -82,7 +82,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
        };
  
        chosen {
-@@ -62,6 +63,15 @@
+@@ -65,6 +66,15 @@
                                        bias-none;
                                };
                        };
@@ -98,7 +98,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi2: gsbi@12480000 {
-@@ -173,5 +183,44 @@
+@@ -176,5 +186,44 @@
                        pinctrl-0 = <&pcie2_pins>;
                        pinctrl-names = "default";
                };
index 7f290d9384621a8311bc8657cdbd9aedc6bf3b46..ce450895904c16ed7aa66e4b42bbcd4116c16f75 100644 (file)
@@ -12,7 +12,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -69,6 +69,16 @@
+@@ -71,6 +71,16 @@
                                        bias-disable;
                                };
                        };
@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -182,5 +192,26 @@
+@@ -184,5 +194,26 @@
                                reg = <4>;
                        };
                };
@@ -58,7 +58,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -72,6 +72,14 @@
+@@ -75,6 +75,14 @@
                                        bias-disable;
                                };
                        };
@@ -73,7 +73,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi2: gsbi@12480000 {
-@@ -222,5 +230,40 @@
+@@ -225,5 +233,40 @@
                                reg = <7>;
                        };
                };
@@ -116,7 +116,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -577,5 +577,91 @@
+@@ -595,5 +595,91 @@
  
                        status = "disabled";
                };