--- /dev/null
+/*
+ * Compex WPJ563 board support
+ *
+ * Copyright (c) 2015 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define WPJ563_GPIO_LED_SIG1 1
+#define WPJ563_GPIO_LED_SIG2 5
+#define WPJ563_GPIO_LED_SIG3 6
+#define WPJ563_GPIO_LED_SIG4 7
+#define WPJ563_GPIO_BUZZER 19
+
+#define WPJ563_GPIO_BTN_RESET 2
+#define WPJ563_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPJ563_KEYS_DEBOUNCE_INTERVAL (3 * WPJ563_KEYS_POLL_INTERVAL)
+
+#define WPJ563_MAC0_OFFSET 0x10
+#define WPJ563_MAC1_OFFSET 0x18
+#define WPJ563_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led WPJ563_leds_gpio[] __initdata = {
+ {
+ .name = "wpj563:green:sig1",
+ .gpio = WPJ563_GPIO_LED_SIG1,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig2",
+ .gpio = WPJ563_GPIO_LED_SIG2,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig3",
+ .gpio = WPJ563_GPIO_LED_SIG3,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:green:sig4",
+ .gpio = WPJ563_GPIO_LED_SIG4,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj563:buzzer",
+ .gpio = WPJ563_GPIO_BUZZER,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button WPJ563_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPJ563_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPJ563_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg WPJ563_ar8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data WPJ563_ar8337_data = {
+ .pad0_cfg = &WPJ563_ar8337_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info WPJ563_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &WPJ563_ar8337_data,
+ },
+};
+
+static void __init WPJ563_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(WPJ563_leds_gpio),
+ WPJ563_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WPJ563_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(WPJ563_gpio_keys),
+ WPJ563_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + WPJ563_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+
+ mdiobus_register_board_info(WPJ563_mdio0_info,
+ ARRAY_SIZE(WPJ563_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ563_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ563_MAC1_OFFSET, 0);
+
+ /* GMAC0 is connected to an QCA8334 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPJ563, "WPJ563", "Compex WPJ563", WPJ563_setup);
projects / openwrt / staging / mkresin.git / commitdiff