kernel: iqp806x low latency kernel does not boot
authorMarc Benoit <marcb62185@gmail.com>
Wed, 4 Apr 2018 22:57:50 +0000 (18:57 -0400)
committerJohn Crispin <john@phrozen.org>
Tue, 22 May 2018 18:34:14 +0000 (20:34 +0200)
It keeps failing (R7800) with the stack trace below

BUG: scheduling while atomic: kworker/0:1/26/0x00000002

(unwind_backtrace) from [<c02121d0>] (show_stack+0x10/0x14)
(show_stack) from [<c03932e4>] (dump_stack+0x7c/0x9c)
(dump_stack) from [<c0239b90>] (__schedule_bug+0x5c/0x80)
(__schedule_bug) from [<c05b7260>] (__schedule+0x50/0x3f4)
(__schedule) from [<c05b76a8>] (schedule+0xa4/0xd4)
(schedule) from [<c05ba430>] (schedule_hrtimeout_range_clock+0xc8/0x100)
(schedule_hrtimeout_range_clock) from [<c05ba480>]
       (schedule_hrtimeout_range+0x18/0x20)
(schedule_hrtimeout_range) from [<c05b9f78>] (usleep_range+0x48/0x50)
(usleep_range) from [<c03f333c>] (__clk_hfpll_enable+0x44/0xd0)
(__clk_hfpll_enable) from [<c03f3474>] (clk_hfpll_set_rate+0xac/0xc4)
(clk_hfpll_set_rate) from [<c03ec390>] (clk_change_rate+0xf4/0x1fc)
(clk_change_rate) from [<c03ec510>] (clk_core_set_rate_nolock+0x78/0x94)
(clk_core_set_rate_nolock) from [<c03ec54c>] (clk_set_rate+0x20/0x30)
(clk_set_rate) from [<c0424168>] (dev_pm_opp_set_rate+0x190/0x26c)
(dev_pm_opp_set_rate) from [<c04a8548>] (set_target+0x40/0x108)
(set_target) from [<c04a4.140>] (__cpufreq_driver_target+0x3f4/0x488)
(__cpufreq_driver_target) from [<c04a7494>] (od_dbs_timer+0xcc/0x154)
(od_dbs_timer) from [<c04a7998>] (dbs_work_handler+0x2c/0x54)
(dbs_work_handler) from [<c02309e8>] (process_one_work+0x1c0/0x2f0)
(process_one_work) from [<c02319a8>] (worker_thread+0x2a4/0x404)
(worker_thread) from [<c0235944>] (kthread+0xd8/0xe8)
(kthread) from [<c020eef0>] (ret_from_fork+0x14/0x24)

Signed-off-by: Marc Benoit <marcb62185@gmail.com>
[slh: rebase for kernel v4.14 as well]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
target/linux/ipq806x/patches-4.9/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch

index e0157d56b88ad07fe8fbf2bd9ac005a47804bef5..f09197caa87e8639c18a2186eeb06d7861127a30 100644 (file)
@@ -117,7 +117,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +       * H/W requires a 5us delay between disabling the bypass and
 +       * de-asserting the reset. Delay 10us just to be safe.
 +       */
-+      usleep_range(10, 100);
++      udelay(10);
 +
 +      /* De-assert active-low PLL reset. */
 +      regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
@@ -128,7 +128,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +                      regmap_read(regmap, hd->status_reg, &val);
 +              } while (!(val & BIT(hd->lock_bit)));
 +      } else {
-+              usleep_range(60, 100);
++              udelay(60);
 +      }
 +
 +      /* Enable PLL output. */
index 70926143ec72655ae170e78b8a567a3bb74fa3b6..a2067572b13f5e2821d82ae0653b2454956fb205 100644 (file)
@@ -117,7 +117,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +       * H/W requires a 5us delay between disabling the bypass and
 +       * de-asserting the reset. Delay 10us just to be safe.
 +       */
-+      usleep_range(10, 100);
++      udelay(10);
 +
 +      /* De-assert active-low PLL reset. */
 +      regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
@@ -128,7 +128,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 +                      regmap_read(regmap, hd->status_reg, &val);
 +              } while (!(val & BIT(hd->lock_bit)));
 +      } else {
-+              usleep_range(60, 100);
++              udelay(60);
 +      }
 +
 +      /* Enable PLL output. */