--- /dev/null
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -190,16 +190,16 @@ static void __init ar934x_usb_setup(void
+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+ return;
+
+- ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
++ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_PHY);
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
+ udelay(1000);
+
+- ath79_device_reset_set(AR934X_RESET_USB_HOST);
++ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+ udelay(1000);
+
+ ath79_ehci_resources[0].start = AR934X_EHCI_BASE;
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,81 @@
+@@ -16,17 +16,86 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
++ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
++ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
++ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
++ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
++ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,382 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
+ bool "MikroTik RouterBOARD 750 support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_USB
+
+config ATH79_MACH_WNDR3700
+ bool "NETGEAR WNDR3700 board support"
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
++config ATH79_MACH_TEW_673GRU
++ bool "TRENDnet TEW-673GRU support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_NVRAM
++
+config ATH79_MACH_UBNT
+ bool "Ubiquiti AR71xx based boards support"
+ select SOC_AR71XX
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
-@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +526,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
endmenu
config SOC_AR71XX
-@@ -96,10 +560,6 @@ config SOC_AR934X
+@@ -96,10 +573,6 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
-@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +583,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +602,7 @@ config ATH79_NVRAM
+@@ -135,4 +615,7 @@ config ATH79_NVRAM
config ATH79_PCI_ATH9K_FIXUP
def_bool n
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -180,6 +180,9 @@ void __init prom_init(void)
+ ath79_prom_append_cmdline("board", env);
+ }
+ }
++
++ if (strstr(arcs_cmdline, "board=750Gr3"))
++ ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+
+ void __init prom_free_prom_memory(void)
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -491,6 +491,17 @@ config ATH79_MACH_TEW_632BRP
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-+config ATH79_MACH_TEW_673GRU
-+ bool "TRENDnet TEW-673GRU support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_NVRAM
-+
- config ATH79_MACH_UBNT
- bool "Ubiquiti AR71xx based boards support"
- select SOC_AR71XX
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -53,6 +53,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
-+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
- ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
- ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
- ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-
- obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
- obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
- obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
-+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
- obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
- obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
- obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -34,6 +34,7 @@ enum ath79_mach_type {
- ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
-+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
- ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
- ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
- ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -52,6 +52,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
- ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
- ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
-+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
- ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -180,6 +180,9 @@ void __init prom_init(void)
- ath79_prom_append_cmdline("board", env);
- }
- }
-+
-+ if (strstr(arcs_cmdline, "board=750Gr3"))
-+ ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
-
- void __init prom_free_prom_memory(void)
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -300,6 +300,8 @@ config ATH79_MACH_RB750
- bool "MikroTik RouterBOARD 750 support"
- select SOC_AR724X
- select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_USB
-
- config ATH79_MACH_WNDR3700
- bool "NETGEAR WNDR3700 board support"
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -53,6 +53,8 @@ enum ath79_mach_type {
- ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
- ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
- ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
-+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
-+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
- ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+++ /dev/null
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -190,16 +190,16 @@ static void __init ar934x_usb_setup(void
- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
- return;
-
-- ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE);
-+ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
- udelay(1000);
-
-- ath79_device_reset_set(AR934X_RESET_USB_PHY);
-+ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
- udelay(1000);
-
-- ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG);
-+ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
- udelay(1000);
-
-- ath79_device_reset_set(AR934X_RESET_USB_HOST);
-+ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
- udelay(1000);
-
- ath79_ehci_resources[0].start = AR934X_EHCI_BASE;