Matthias Schiffer [Thu, 5 Jan 2017 15:01:17 +0000 (16:01 +0100)]
ar71xx: add support for TP-Link WBS210/510
The devices are mostly identical to the CPE210/510, but use external
antennas.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Matthias Schiffer [Thu, 5 Jan 2017 15:01:17 +0000 (16:01 +0100)]
firmware-utils: tplink-safeloader: add support for TP-Link WBS210/510 1.2
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:31:28 +0000 (14:31 +0100)]
tools: cmake: use different approach for passing LDFLAGS
Funnel the required LDFLAGS environment through HOST_CONFIGURE_CMD for now
as the HOST_CONFIGURE_VARS semantics are completely broken.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:29:28 +0000 (14:29 +0100)]
Revert "build: fix HOST_CONFIGURE_VARS placement"
This reverts commit
8395b63aac616f72fd835c59240fc2a4a6b28106.
Various host builds currently rely on the broken behaviour of
HOST_CONFIGURE_VARS so roll back to the previous state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:16:57 +0000 (14:16 +0100)]
tools: cmake: use pkg-config to discover libcrypto linker flags
LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.
Use pkg-config to portably discover the required linker flags.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:15:32 +0000 (14:15 +0100)]
tools: mkimage: use pkg-config to discover libcrypto linker flags
LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.
Use pkg-config to portably discover the required linker flags.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:12:31 +0000 (14:12 +0100)]
tools: make libressl build depend on pkg-config
Ensure that pkg-config is available before building libressl as we're going
to need it for setting proper link flags in utilities requiring libcrypto.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 5 Jan 2017 13:10:31 +0000 (14:10 +0100)]
build: fix HOST_CONFIGURE_VARS placement
Ensure that HOST_CONFIGURE_VARS are set before the actual configure command
instead of passing them as configure command arguments.
This change brings host-build.mk in line with package-defaults.mk and makes
host configure environment variables work as expected.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Thu, 5 Jan 2017 12:22:42 +0000 (13:22 +0100)]
cmake: update to version 3.7.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 5 Jan 2017 10:49:58 +0000 (11:49 +0100)]
build: ensure that prereq-build is run before metadata scan from feeds (FS#367)
Fixes ./scripts/feeds update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 5 Jan 2017 09:58:00 +0000 (10:58 +0100)]
uboot-sunxi: enable parallel build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Yousong Zhou [Wed, 4 Jan 2017 14:19:30 +0000 (22:19 +0800)]
sunxi: use fwtool for checking sdcard images
To achieve this, device tree compatible string was used as boardname and
the value of it will be checked against supported_devices list.
It should be noted that we do not distinguish between
sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts
file.
The other thing is that we need to gunzip the generated firmware to do
fwtool check.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 4 Jan 2017 14:19:29 +0000 (22:19 +0800)]
sunxi: add sysupgrade support
Enalbe builtin support for FAT filesystem as we need to mount boot
partition to store sysupgrade.tgz there
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 4 Jan 2017 14:19:28 +0000 (22:19 +0800)]
sunxi: make sdcard image with squashfs as rootfs
Two things that need to be noted
- There is no partition type id allocated for squashfs yet. In the
case of sunxi, any non-zero value should work and we keep it 83 (the
value for ext4)
- Remaining spare space within the rootfs partition, not the entire
sdcard space will be formated as either f2fs or ext4 and mounted as
overlay to serve the role of rootfs_data.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 4 Jan 2017 14:19:27 +0000 (22:19 +0800)]
sunxi: convert to new image generation method
The new Device/xxx were transformed automatically from old profiles.
Most device names are now taken from basename of the corresponding
kernel device tree file. Device/sun5i-a13-olimex-som is an exception
because it is not explicitly supported in the kernel yet and shares the
same dts file with Device/sun5i-a13-olinuxino
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 4 Jan 2017 14:19:31 +0000 (22:19 +0800)]
uboot-sunxi: add uboot-sunxi-all for selecting all other variants
While at it, the following changes are introduced
- Rewrite the Makefile for better readability
- Make parallel builds possible
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 31 Dec 2016 17:06:37 +0000 (01:06 +0800)]
base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 31 Dec 2016 17:06:35 +0000 (01:06 +0800)]
sunxi: enable loopback device and f2fs support
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 31 Dec 2016 17:06:33 +0000 (01:06 +0800)]
sunxi: fix dts name for Mele M9
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 31 Dec 2016 17:06:30 +0000 (01:06 +0800)]
build: unzip: perform operations quietly
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Sat, 31 Dec 2016 17:06:29 +0000 (01:06 +0800)]
x86: move sysupgrade.tgz only if it exists
To squash error messages at boot time
mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Felix Fietkau [Fri, 30 Dec 2016 13:57:22 +0000 (14:57 +0100)]
kernel: spi: allow setting chipselect gpio to sleep
Fixes issues on some ar71xx MikroTik RouterBoard devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 29 Dec 2016 00:07:34 +0000 (01:07 +0100)]
ar71xx: remove a non-upstream spi core patch
- use standard flags instead
- remove dead code from the rb4xx spi drivers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 22:57:15 +0000 (23:57 +0100)]
ath9k: don't run periodic and nf calibration at the same time
Might fix some stability issues on older chips
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 25 Dec 2016 15:40:05 +0000 (16:40 +0100)]
build: use mkhash to replace various quirky md5sum/openssl calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 25 Dec 2016 15:23:34 +0000 (16:23 +0100)]
build: add a small standalone utility for calculating md5/sha256 hash
This will be used to simplify the build system code for checking hashes.
Instead of using various variants of md5sum / openssl, use one simple
utility for all of them
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 25 Dec 2016 12:26:46 +0000 (13:26 +0100)]
tools: make cmake depend on libressl, one of its utilities uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 25 Dec 2016 12:23:21 +0000 (13:23 +0100)]
host-build: remove openssl include path from host cflags
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 25 Dec 2016 12:20:38 +0000 (13:20 +0100)]
tools: build libressl on all systems
Useful for having a more consistent build environment and finding API
issues faster
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Wed, 4 Jan 2017 18:40:32 +0000 (19:40 +0100)]
oxnas: remove support for pre-4.4 kernels from drivers
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Stijn Tintel [Tue, 3 Jan 2017 23:52:18 +0000 (00:52 +0100)]
kernel/modules: add SSSE3 SHA512 module
This module is optimized for SSSE3/AVX/AVX2.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Tue, 3 Jan 2017 23:50:32 +0000 (00:50 +0100)]
kernel/modules: add SSSE3 SHA256 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Tue, 3 Jan 2017 23:44:14 +0000 (00:44 +0100)]
kernel/modules: add SSSE3 SHA1 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 4 Jan 2017 01:45:36 +0000 (02:45 +0100)]
kernel: allow subtarget specific KernelPackage
Add a call to KernelPackage/$(1)/$(BOARD)/$(SUBTARGET) to the
KernelPackage macro. This allows to add kernel packages for x86/64,
without breaking x86. It's not possible to do this with BOARD, as
BOARD=x86 for x86_64.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Tue, 3 Jan 2017 23:15:23 +0000 (00:15 +0100)]
x86/64: enable AES-NI support in kernel
The kernel will detect if the host supports this, so we can just enable
it in the kernel config.
Tested on an APU2 with AES-NI support and a KVM VM on a Xeon E5520 host
without AES-NI support.
Throughput over an IPsec tunnel between these 2 hosts increased from
~63Mbps to ~140Mbps. Ciphers: AES_GCM_16_256/PRF_HMAC_SHA2_512/ECP_521.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Rafał Miłecki [Wed, 4 Jan 2017 11:38:48 +0000 (12:38 +0100)]
brcm47xx: generic: include Ethernet drivers in standard image
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 4 Jan 2017 11:17:42 +0000 (12:17 +0100)]
brcm47xx: drop some personal profiles
WL500GPv1 profile included ath5k which made it usable only for people
who decided to replace default BCM4318 card with Atheros one. We can't
have profile for every possible configuration. If someone adjusts hw in
such a way he can always install a proper package.
WRTSL54GS profile got extra packages for a specific USB usage. Our
standard profile provides basic USB and we should stick to this. We
can't make everyone happy by including packages for all common USB use
cases and all common filesystems.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 4 Jan 2017 11:14:57 +0000 (12:14 +0100)]
brcm47xx: generic: drop standalone profiles duplicating device ones
We have identical profiles for these devices thanks to DEVICE_PACKAGES.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 4 Jan 2017 10:54:44 +0000 (11:54 +0100)]
brcm47xx: generic: specify DEVICE_PACKAGES for all devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 4 Jan 2017 10:43:59 +0000 (11:43 +0100)]
brcm47xx: fix bgmac package
With all recent patches & changes it needs more modules.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jo-Philipp Wich [Wed, 4 Jan 2017 08:03:50 +0000 (09:03 +0100)]
build: add diffconfig target
Add a "diffconfig" build target which stores the output of
"scripts/diffconfig.sh" as "config.seed" in the image output directory and
invoke that target by default.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 4 Jan 2017 09:42:28 +0000 (10:42 +0100)]
powerpc: boot: fix build with parallel make
The powerpc boot wrapper Makefile is not parallel build safe, causing fixdep
to fail reading dependency files of the addnote, hack-coff and mktree
utilities when concurrently building different image targets.
A typical failure looks like:
Building modules, stage 2.
HOSTCC arch/powerpc/boot/addnote
HOSTCC arch/powerpc/boot/hack-coff
DTC arch/powerpc/boot/taishan.dtb
HOSTCC arch/powerpc/boot/addnote
HOSTCC arch/powerpc/boot/hack-coff
MODPOST 800 modules
fixdep: error opening depfile: arch/powerpc/boot/.hack-coff.d: No such file or directory
scripts/Makefile.host:91: recipe for target 'arch/powerpc/boot/hack-coff' failed
make[5]: *** [arch/powerpc/boot/hack-coff] Error 2
make[5]: *** Waiting for unfinished jobs....
fixdep: error opening depfile: arch/powerpc/boot/.addnote.d: No such file or directory
scripts/Makefile.host:91: recipe for target 'arch/powerpc/boot/addnote' failed
make[5]: *** [arch/powerpc/boot/addnote] Error 2
rm arch/powerpc/boot/taishan.dtb
arch/powerpc/Makefile:263: recipe for target 'cuImage.taishan' failed
make[4]: *** [cuImage.taishan] Error 2
make[4]: *** Waiting for unfinished jobs....
Add a GNU make specific .NOTPARALLEL pseudo rule to enforce sequential building
of the addnote, hack-coff and mktree executables.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rafał Miłecki [Thu, 29 Dec 2016 09:11:46 +0000 (10:11 +0100)]
brcm47xx: mips74k: specify DEVICE_PACKAGES for all devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 29 Dec 2016 07:06:16 +0000 (08:06 +0100)]
brcm47xx: legacy: specify DEVICE_PACKAGES for all devices
This allows more feature complete images. Of course it affect the size,
e.g. enabling b43 bumped rootfs from
1569618 to
2029122 for me.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Wed, 4 Jan 2017 00:12:34 +0000 (01:12 +0100)]
Revert "ath9k: Add airtime fairness scheduler"
This reverts commit
528f46d0826afa01877ccc7670f2120a7a3b3ea8.
After this commit, several users reported stability issues. Revert it
now so it doesn't cause issues for the upcoming release
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Arjen de Korte [Tue, 20 Dec 2016 21:29:59 +0000 (22:29 +0100)]
dnsmasq: add DHCP Unique Identifier for DHCPv6
Add DHCPv6 matching by DHCP Unique Identifier (RFC-3315) in addition to
existing MAC-address (RFC-6939). The latter is not widely supported yet.
Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
Hans Dedecker [Mon, 2 Jan 2017 17:00:58 +0000 (18:00 +0100)]
odhcpd: bump to git HEAD version
091d8a9 dhcpv6-ia: fix static assignment check
11ce6b5 dhcpv6-ia: coding style fixes
561890e dhcpv6-ia: update valid_until only for non static DHCPv6 leases
0b45fce dhcpv4: coding style fixes
95b76c2 README: Add host leasetime uci parameter
541219e dhcpv6-ia: fix invalid IPv6/hostname entries in statefile
13937ab dhcpv6-ia: fix delete logic of an assignment in reconf_timer
60c3969 dhcpv6-ia : code style fixes
bf4ebc0 config: use free_lease to delete a lease
c24782a config: coding style fixes
0572d1a config: Create statefile dir
ec833f4 dhcpv6-ia: use free_dhcpv6_assignment where needed
1d55edb dhcpv6-ia: make free_dhcpv6_assignment static
f01e538 dhcpv4: make dhcpv4_msg_to_string static
700f5ab dhcpv4: fix DHCPv4 hostname handling
4c89614 Limit lifetime of non-static leases in case of release and
decline
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 16:46:20 +0000 (17:46 +0100)]
odhcp6c: bump to git HEAD version
5d6fec3 Merge pull request #50 from sartura/libubox_md5_reuse
33a2ba1 odhcp6c: reuse md5 from libubox
Switch PKG_SOURCE_URL to git.lede-project.org/project/odhcp6c.git
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Stijn Tintel [Wed, 28 Dec 2016 05:18:54 +0000 (06:18 +0100)]
hostapd: enable SHA256-based algorithms
Enable support for stronger SHA256-based algorithms in hostapd and
wpa_supplicant when using WPA-EAP or WPA-PSK with 802.11w enabled.
We cannot unconditionally enable it, as it requires hostapd to be
compiled with 802.11w support, which is disabled in the -mini variants.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
Stijn Tintel [Wed, 28 Dec 2016 04:22:00 +0000 (05:22 +0100)]
hostapd: add function to handle wpa_key_mgmt
Now that wpa_key_mgmt handling for hostapd and wpa_supplicant are
consistent, we can move parts of it to a dedicated function.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
Stijn Tintel [Sun, 11 Dec 2016 14:54:06 +0000 (15:54 +0100)]
wpa_supplicant: rework wpa_key_mgmt handling
Rework wpa_key_mgmt handling for wpa_supplicant to be consistent with
how it is done for hostapd.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
Stijn Tintel [Sun, 11 Dec 2016 13:36:29 +0000 (14:36 +0100)]
ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Victor Shyba [Tue, 20 Dec 2016 23:35:32 +0000 (20:35 -0300)]
generic: mtd: add lock/unlock support for f25l32pa
This chip has write protection enabled on power-up, so this flag is
necessary to support write operations.
Signed-off-by: Victor Shyba <victor1984@riseup.net>
Victor Shyba [Tue, 20 Dec 2016 08:19:08 +0000 (05:19 -0300)]
generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.
Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Yutang Jiang [Tue, 27 Dec 2016 17:28:02 +0000 (01:28 +0800)]
layerscape: add ls2088ardb device support
The QorIQ LS2088A processor is built on the Layerscape
architecture combining eight ARM A72 processor cores
with advanced, high-performance datapath acceleration
and network, peripheral interfaces required for
networking, telecom, wireless infrastructure, aerospace
applications and general-purpose embedded applications.
Features summary:
- Eight 64-bit ARM v8 Cortex-A72 CPUs
- Two 64-bit DDR4 SDRAM memory controller with ECC
- One 32-bit DDR3 SDRAM memory controller with ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Yutang Jiang [Fri, 23 Dec 2016 17:11:32 +0000 (01:11 +0800)]
layerscape: add ls1088ardb device support
LS1088A is an ARMv8 implementation combining eight ARM A53 processor
cores. The LS1088ARDB is an evaluatoin platform that supports the
LS1088A family SoCs.
Features summary:
- Eight 64-bit ARM v8 Cortex-A53 CPUs
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Roger Pueyo Centelles [Wed, 2 Nov 2016 12:18:01 +0000 (13:18 +0100)]
gre: add different per-protocol prefixes to GRE-TAP IPv4/6 tunnel interfaces.
This commit modifies the /lib/netifd/proto/gre.sh script so that, when
GRE-TAP tunnels are created, either IPv4 or IPv6, the prefix before the chosen
interface name contains the "tap" substring, to differentiate them from non-TAP
GRE tunnels.
Right now, both GRE and GRE-TAP tunnel (either IPv4 or IPv6) interfaces defined
in /etc/config/network are named equally ("gre-"+$ifname or "grev6"+$ifname)
upon creation. For instance, the following tunnels:
config interface 'tuna'
option peeraddr '172.30.22.1'
option proto 'gre'
config interface 'tunb'
option peeraddr '192.168.233.4'
option proto 'gretap'
config interface 'tunc'
option peer6addr 'fdc5:7c9e:e93d:45af::1'
option proto 'grev6'
config interface 'tund'
option peer6addr 'fdc0:6071:1348:31ff::2'
option proto 'grev6tap'
are named, respectively, "gre-tuna", "gre-tunb", "grev6-tunc" and "grev6-tund".
The current change makes that each GRE tunnel interface of the four different
types available (gre, gretap, grev6 and grev6tap) gets a different prefix.
Therefore, the abovementioned tunnels will be named, respectively:
"gre4-tuna", "gre4t-tunb", "gre6-tunc" and "gre6t-tund".
This is coherent with other types of virtual interfaces (i.e. PPP, PPPoE, PPPoA)
where the whole protocol name is used. For instance, a PPPoA interface named
"p1" and a PPPoE interface named "p2" will respectively appear as "pppoa-p1"
and "pppoe-p2", not as "ppp-p1" and "ppp-p2").
Since Linux interfaces names are limited to 15 characters, these prefixes leave,
for the worst case (TAP tunnels), 9 characters for the actual name.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Alexandru Ardelean [Mon, 31 Oct 2016 08:14:10 +0000 (10:14 +0200)]
build: drop `trapret` function from non-Linux HOST_TAR variant
Looks like this was meant to workaround some limitations with
non-GNU tar variants (like BSD-tar which are present on Mac os BSD hosts).
Though, I cannot find any use of that `+s` option that's mentioned
in the comment.
Last hash of this I found was
24faf55360271cd0bfc4751753384f9210d52f7f
In my case, it now this fails for `python-setuptools` on Mac OS X (the host-build with):
```
trapret 2 tar -C <home-dir>/work/sources-work/lede/build_dir/target-i386_pentium4_musl-1.1.15/python-setuptools-27.2.0 --strip-components=1 -xzf <home-dir>/work/sources-work/lede/dl/setuptools-27.2.0.tar.gz
bash: trapret: command not found
```
So, I was thinking maybe it's time to remove this workaround (9 years later).
I could also fix the `python-setuptools` host build. If that's more preferred.
[ Btw, I just recently transitioned to a Mac machine for dev-ing,
so a lot of (this Mac) stuff I'm finding out is new to me too. ]
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Luiz Angelo Daros de Luca [Thu, 29 Dec 2016 03:53:45 +0000 (01:53 -0200)]
elfutils: bump to 0.168
Other changes:
- Project moved to sourceware.org
- musl patch where cleaned up and submitted upstream
- TEMP_FAILURE_RETRY macro fixed and submitted upstream
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[Jo-Philipp Wich: add missing .patch extension to 007-fix_TEMP_FAILURE_RETRY]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Brian J. Murrell [Sun, 20 Nov 2016 21:01:33 +0000 (16:01 -0500)]
download.pl: use curl in preference to wget
Because wget doesn't know how to do Negotiate authentication with a proxy
and curl does, use curl if it's present. The user is expected to have a
~/.curlrc that sets the options necessary for any proxy authentication.
A ~/.curlrc is completely optional however and curl will work in exactly
the same manner as wget without one.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
[Jo-Philipp Wich: Rework code to detect curl usability by checking --version,
Use vararg style open() to bypass the shell when downloading,
Use Text::ParseWords to decompose env vars into arguments]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rosen Penev [Fri, 30 Dec 2016 02:53:03 +0000 (18:53 -0800)]
curl: Remove PolarSSL and adjust default to mbedTLS
luci-ssl has already made the switch since mainline support for PolarSSL is
almost over (2016).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Engberg [Mon, 2 Jan 2017 20:17:02 +0000 (21:17 +0100)]
tools: gmp: Update to 6.1.2
Updates GMP to 6.1.2
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:14:49 +0000 (21:14 +0100)]
gmp: Update to 6.1.2
Update GMP to 6.1.2
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:22:13 +0000 (21:22 +0100)]
zlib: Update to 1.2.9
Update zlib to 1.2.9 and switch to XZ tarballs for download.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:29:52 +0000 (21:29 +0100)]
libusb: Update to 1.0.21
Update libusb to 1.0.21
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:33:37 +0000 (21:33 +0100)]
xz: Update to 5.2.3
Update xz to 5.2.3
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Florian Fainelli [Sun, 1 Jan 2017 00:13:33 +0000 (16:13 -0800)]
rpcd: Update to 2016-12-03
Brings in the following changes:
0577cfc1acdb cmake: Find libubox/blobmsg_json.h
26c98ec94d7a sys: Check return values of chdir and write
f4089654a399 cmake: Find libubus.h
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sun, 1 Jan 2017 00:13:32 +0000 (16:13 -0800)]
fstools: Update to 2016-12-04
Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sun, 1 Jan 2017 00:13:31 +0000 (16:13 -0800)]
uclient: Update to 2016-12-09
Brings in the following changes:
52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
John Crispin [Mon, 2 Jan 2017 14:45:46 +0000 (15:45 +0100)]
ixp4xx: drop 3.18 config/patches
the default has been 4.4 for a while now
Signed-off-by: John Crispin <john@phrozen.org>
Mathias Kresin [Fri, 30 Dec 2016 20:42:05 +0000 (21:42 +0100)]
uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 30 Dec 2016 20:00:34 +0000 (21:00 +0100)]
uboot-lantiq: fix build with gcc6
Backport u-boot commit
9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 29 Dec 2016 20:47:54 +0000 (21:47 +0100)]
generic: backport dwc2 kernel panic fix
In case the soft reset in dwc2_core_reset() timeouts, the
hsotg->core_params are freed albeit it is owned by the core. This
results into a kernel panic as shown in FS#351.
Signed-off-by: Mathias Kresin <dev@kresin.me>
L. D. Pinney [Thu, 29 Dec 2016 07:43:08 +0000 (01:43 -0600)]
ramips: MiWiFi Nano fixes
Use the the dt-bindings macros and add the reset button.
Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.
Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alexis Green [Wed, 21 Dec 2016 23:17:01 +0000 (15:17 -0800)]
mac80211: Allow HT/VHT rates when running unencrypted mesh.
Signed-off-by: Alexis Green <agreen@cococorp.com>
Alberto Bursi [Sun, 1 Jan 2017 16:24:18 +0000 (17:24 +0100)]
base-files: fix message of initscript wrapper
currently (after blogic's edit to my commit) it prints like this:
root@lede:/# service aa
aa does not exist. the following services are available :adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.
with this commit it looks like this:
root@lede:/# service
service "" not found, the following services are available:
adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
George Amanakis [Mon, 2 Jan 2017 03:38:46 +0000 (22:38 -0500)]
generic: package Broadcom BNX2 driver
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.
Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
Hauke Mehrtens [Mon, 2 Jan 2017 12:34:57 +0000 (13:34 +0100)]
oxnas: fix syntax in ox820-akitio.dts
This commit introduced a syntax error in ox820-akitio.dts which is
fixed now:
commit
5cde94d9ab577c5ab68fc71e15a05d1bda5041f2
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 24 01:14:53 2016 +0200
oxnas: backport upstream NAND driver
This caused the folowing error message in the build bot:
Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed
make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 2 Jan 2017 12:07:10 +0000 (13:07 +0100)]
curl: update to version 7.52.1
This fixes the folowing security problems:
CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Sun, 1 Jan 2017 09:06:05 +0000 (10:06 +0100)]
oxnas: append metadata to sysupgrade image
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 23 Sep 2016 23:14:53 +0000 (01:14 +0200)]
oxnas: backport upstream NAND driver
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 1 Jan 2017 09:05:24 +0000 (10:05 +0100)]
oxnas: drop support for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 1 Jan 2017 09:04:33 +0000 (10:04 +0100)]
oxnas: switch to kernel 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hannu Nyman [Fri, 30 Dec 2016 14:49:44 +0000 (16:49 +0200)]
ustream-ssl: remove extra DEFAULT_VARIANT from libustream-polarssl
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT
Remove extra DEFAULT_VARIANT from libustream-polarssl.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Magnus Kroken [Fri, 30 Dec 2016 00:33:16 +0000 (01:33 +0100)]
openvpn: update to 2.4.0
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Magnus Kroken [Fri, 30 Dec 2016 00:31:29 +0000 (01:31 +0100)]
mbedtls: enable DHE-RSA key exchange
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
Magnus Kroken [Fri, 30 Dec 2016 00:31:28 +0000 (01:31 +0100)]
mbedtls: enable secp384r1 elliptic curve support
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Felix Fietkau [Fri, 30 Dec 2016 11:38:06 +0000 (12:38 +0100)]
kirkwood: fix ubi partition name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 30 Dec 2016 10:55:16 +0000 (11:55 +0100)]
kirkwood: fix sysupgrade for non-dockstar NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Wed, 28 Dec 2016 22:15:52 +0000 (23:15 +0100)]
brcm47xx: drop standalone Netgear WGT634U profile
We have profile for this device thanks to DEVICE_PACKAGES now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
Rafał Miłecki [Wed, 28 Dec 2016 22:10:14 +0000 (23:10 +0100)]
brcm47xx: specify DEVICE_PACKAGES for Netgear WGT634U
This allows using it nicely with PER_DEVICE_ROOTFS.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
Rafał Miłecki [Thu, 29 Dec 2016 17:03:30 +0000 (18:03 +0100)]
bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit
741715331aee ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 29 Dec 2016 08:40:32 +0000 (09:40 +0100)]
brcm47xx: mips74k: fix typo in Netgear WN3000RP model name
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 28 Dec 2016 22:01:11 +0000 (23:01 +0100)]
ramips: fix NixcoreX1 profiles
There was a typo in Makefile that prevented using these profiles.
Fixes: a75ce960ac1 ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Wed, 28 Dec 2016 21:56:27 +0000 (22:56 +0100)]
mbedtls: enable support for external private RSA keys to fix openvpn build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sven Roederer [Tue, 27 Dec 2016 00:47:48 +0000 (01:47 +0100)]
linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in
9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in
018807d
this will also fix imagebuilder
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Felix Fietkau [Wed, 28 Dec 2016 00:10:37 +0000 (01:10 +0100)]
libressl: disable shared libraries, fixes build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 19:54:15 +0000 (20:54 +0100)]
ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 12:21:42 +0000 (13:21 +0100)]
relayd: fix expiry time handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 12:19:46 +0000 (13:19 +0100)]
relayd: fix reload / interface restart issues
- replace the hotplug script with an interface trigger
- add netdev params to procd to trigger restart
Signed-off-by: Felix Fietkau <nbd@nbd.name>