Stijn Tintel [Wed, 28 Dec 2016 04:22:00 +0000 (05:22 +0100)]
hostapd: add function to handle wpa_key_mgmt
Now that wpa_key_mgmt handling for hostapd and wpa_supplicant are
consistent, we can move parts of it to a dedicated function.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
Stijn Tintel [Sun, 11 Dec 2016 14:54:06 +0000 (15:54 +0100)]
wpa_supplicant: rework wpa_key_mgmt handling
Rework wpa_key_mgmt handling for wpa_supplicant to be consistent with
how it is done for hostapd.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
Stijn Tintel [Sun, 11 Dec 2016 13:36:29 +0000 (14:36 +0100)]
ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Victor Shyba [Tue, 20 Dec 2016 23:35:32 +0000 (20:35 -0300)]
generic: mtd: add lock/unlock support for f25l32pa
This chip has write protection enabled on power-up, so this flag is
necessary to support write operations.
Signed-off-by: Victor Shyba <victor1984@riseup.net>
Victor Shyba [Tue, 20 Dec 2016 08:19:08 +0000 (05:19 -0300)]
generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.
Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Yutang Jiang [Tue, 27 Dec 2016 17:28:02 +0000 (01:28 +0800)]
layerscape: add ls2088ardb device support
The QorIQ LS2088A processor is built on the Layerscape
architecture combining eight ARM A72 processor cores
with advanced, high-performance datapath acceleration
and network, peripheral interfaces required for
networking, telecom, wireless infrastructure, aerospace
applications and general-purpose embedded applications.
Features summary:
- Eight 64-bit ARM v8 Cortex-A72 CPUs
- Two 64-bit DDR4 SDRAM memory controller with ECC
- One 32-bit DDR3 SDRAM memory controller with ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Yutang Jiang [Fri, 23 Dec 2016 17:11:32 +0000 (01:11 +0800)]
layerscape: add ls1088ardb device support
LS1088A is an ARMv8 implementation combining eight ARM A53 processor
cores. The LS1088ARDB is an evaluatoin platform that supports the
LS1088A family SoCs.
Features summary:
- Eight 64-bit ARM v8 Cortex-A53 CPUs
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc
Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Roger Pueyo Centelles [Wed, 2 Nov 2016 12:18:01 +0000 (13:18 +0100)]
gre: add different per-protocol prefixes to GRE-TAP IPv4/6 tunnel interfaces.
This commit modifies the /lib/netifd/proto/gre.sh script so that, when
GRE-TAP tunnels are created, either IPv4 or IPv6, the prefix before the chosen
interface name contains the "tap" substring, to differentiate them from non-TAP
GRE tunnels.
Right now, both GRE and GRE-TAP tunnel (either IPv4 or IPv6) interfaces defined
in /etc/config/network are named equally ("gre-"+$ifname or "grev6"+$ifname)
upon creation. For instance, the following tunnels:
config interface 'tuna'
option peeraddr '172.30.22.1'
option proto 'gre'
config interface 'tunb'
option peeraddr '192.168.233.4'
option proto 'gretap'
config interface 'tunc'
option peer6addr 'fdc5:7c9e:e93d:45af::1'
option proto 'grev6'
config interface 'tund'
option peer6addr 'fdc0:6071:1348:31ff::2'
option proto 'grev6tap'
are named, respectively, "gre-tuna", "gre-tunb", "grev6-tunc" and "grev6-tund".
The current change makes that each GRE tunnel interface of the four different
types available (gre, gretap, grev6 and grev6tap) gets a different prefix.
Therefore, the abovementioned tunnels will be named, respectively:
"gre4-tuna", "gre4t-tunb", "gre6-tunc" and "gre6t-tund".
This is coherent with other types of virtual interfaces (i.e. PPP, PPPoE, PPPoA)
where the whole protocol name is used. For instance, a PPPoA interface named
"p1" and a PPPoE interface named "p2" will respectively appear as "pppoa-p1"
and "pppoe-p2", not as "ppp-p1" and "ppp-p2").
Since Linux interfaces names are limited to 15 characters, these prefixes leave,
for the worst case (TAP tunnels), 9 characters for the actual name.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Alexandru Ardelean [Mon, 31 Oct 2016 08:14:10 +0000 (10:14 +0200)]
build: drop `trapret` function from non-Linux HOST_TAR variant
Looks like this was meant to workaround some limitations with
non-GNU tar variants (like BSD-tar which are present on Mac os BSD hosts).
Though, I cannot find any use of that `+s` option that's mentioned
in the comment.
Last hash of this I found was
24faf55360271cd0bfc4751753384f9210d52f7f
In my case, it now this fails for `python-setuptools` on Mac OS X (the host-build with):
```
trapret 2 tar -C <home-dir>/work/sources-work/lede/build_dir/target-i386_pentium4_musl-1.1.15/python-setuptools-27.2.0 --strip-components=1 -xzf <home-dir>/work/sources-work/lede/dl/setuptools-27.2.0.tar.gz
bash: trapret: command not found
```
So, I was thinking maybe it's time to remove this workaround (9 years later).
I could also fix the `python-setuptools` host build. If that's more preferred.
[ Btw, I just recently transitioned to a Mac machine for dev-ing,
so a lot of (this Mac) stuff I'm finding out is new to me too. ]
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Luiz Angelo Daros de Luca [Thu, 29 Dec 2016 03:53:45 +0000 (01:53 -0200)]
elfutils: bump to 0.168
Other changes:
- Project moved to sourceware.org
- musl patch where cleaned up and submitted upstream
- TEMP_FAILURE_RETRY macro fixed and submitted upstream
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[Jo-Philipp Wich: add missing .patch extension to 007-fix_TEMP_FAILURE_RETRY]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Brian J. Murrell [Sun, 20 Nov 2016 21:01:33 +0000 (16:01 -0500)]
download.pl: use curl in preference to wget
Because wget doesn't know how to do Negotiate authentication with a proxy
and curl does, use curl if it's present. The user is expected to have a
~/.curlrc that sets the options necessary for any proxy authentication.
A ~/.curlrc is completely optional however and curl will work in exactly
the same manner as wget without one.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
[Jo-Philipp Wich: Rework code to detect curl usability by checking --version,
Use vararg style open() to bypass the shell when downloading,
Use Text::ParseWords to decompose env vars into arguments]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rosen Penev [Fri, 30 Dec 2016 02:53:03 +0000 (18:53 -0800)]
curl: Remove PolarSSL and adjust default to mbedTLS
luci-ssl has already made the switch since mainline support for PolarSSL is
almost over (2016).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Engberg [Mon, 2 Jan 2017 20:17:02 +0000 (21:17 +0100)]
tools: gmp: Update to 6.1.2
Updates GMP to 6.1.2
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:14:49 +0000 (21:14 +0100)]
gmp: Update to 6.1.2
Update GMP to 6.1.2
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:22:13 +0000 (21:22 +0100)]
zlib: Update to 1.2.9
Update zlib to 1.2.9 and switch to XZ tarballs for download.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:29:52 +0000 (21:29 +0100)]
libusb: Update to 1.0.21
Update libusb to 1.0.21
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 2 Jan 2017 20:33:37 +0000 (21:33 +0100)]
xz: Update to 5.2.3
Update xz to 5.2.3
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Florian Fainelli [Sun, 1 Jan 2017 00:13:33 +0000 (16:13 -0800)]
rpcd: Update to 2016-12-03
Brings in the following changes:
0577cfc1acdb cmake: Find libubox/blobmsg_json.h
26c98ec94d7a sys: Check return values of chdir and write
f4089654a399 cmake: Find libubus.h
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sun, 1 Jan 2017 00:13:32 +0000 (16:13 -0800)]
fstools: Update to 2016-12-04
Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sun, 1 Jan 2017 00:13:31 +0000 (16:13 -0800)]
uclient: Update to 2016-12-09
Brings in the following changes:
52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
John Crispin [Mon, 2 Jan 2017 14:45:46 +0000 (15:45 +0100)]
ixp4xx: drop 3.18 config/patches
the default has been 4.4 for a while now
Signed-off-by: John Crispin <john@phrozen.org>
Mathias Kresin [Fri, 30 Dec 2016 20:42:05 +0000 (21:42 +0100)]
uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 30 Dec 2016 20:00:34 +0000 (21:00 +0100)]
uboot-lantiq: fix build with gcc6
Backport u-boot commit
9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 29 Dec 2016 20:47:54 +0000 (21:47 +0100)]
generic: backport dwc2 kernel panic fix
In case the soft reset in dwc2_core_reset() timeouts, the
hsotg->core_params are freed albeit it is owned by the core. This
results into a kernel panic as shown in FS#351.
Signed-off-by: Mathias Kresin <dev@kresin.me>
L. D. Pinney [Thu, 29 Dec 2016 07:43:08 +0000 (01:43 -0600)]
ramips: MiWiFi Nano fixes
Use the the dt-bindings macros and add the reset button.
Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.
Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alexis Green [Wed, 21 Dec 2016 23:17:01 +0000 (15:17 -0800)]
mac80211: Allow HT/VHT rates when running unencrypted mesh.
Signed-off-by: Alexis Green <agreen@cococorp.com>
Alberto Bursi [Sun, 1 Jan 2017 16:24:18 +0000 (17:24 +0100)]
base-files: fix message of initscript wrapper
currently (after blogic's edit to my commit) it prints like this:
root@lede:/# service aa
aa does not exist. the following services are available :adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.
with this commit it looks like this:
root@lede:/# service
service "" not found, the following services are available:
adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
George Amanakis [Mon, 2 Jan 2017 03:38:46 +0000 (22:38 -0500)]
generic: package Broadcom BNX2 driver
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.
Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
Hauke Mehrtens [Mon, 2 Jan 2017 12:34:57 +0000 (13:34 +0100)]
oxnas: fix syntax in ox820-akitio.dts
This commit introduced a syntax error in ox820-akitio.dts which is
fixed now:
commit
5cde94d9ab577c5ab68fc71e15a05d1bda5041f2
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 24 01:14:53 2016 +0200
oxnas: backport upstream NAND driver
This caused the folowing error message in the build bot:
Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed
make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 2 Jan 2017 12:07:10 +0000 (13:07 +0100)]
curl: update to version 7.52.1
This fixes the folowing security problems:
CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Sun, 1 Jan 2017 09:06:05 +0000 (10:06 +0100)]
oxnas: append metadata to sysupgrade image
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 23 Sep 2016 23:14:53 +0000 (01:14 +0200)]
oxnas: backport upstream NAND driver
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 1 Jan 2017 09:05:24 +0000 (10:05 +0100)]
oxnas: drop support for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 1 Jan 2017 09:04:33 +0000 (10:04 +0100)]
oxnas: switch to kernel 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hannu Nyman [Fri, 30 Dec 2016 14:49:44 +0000 (16:49 +0200)]
ustream-ssl: remove extra DEFAULT_VARIANT from libustream-polarssl
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT
Remove extra DEFAULT_VARIANT from libustream-polarssl.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Magnus Kroken [Fri, 30 Dec 2016 00:33:16 +0000 (01:33 +0100)]
openvpn: update to 2.4.0
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Magnus Kroken [Fri, 30 Dec 2016 00:31:29 +0000 (01:31 +0100)]
mbedtls: enable DHE-RSA key exchange
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
Magnus Kroken [Fri, 30 Dec 2016 00:31:28 +0000 (01:31 +0100)]
mbedtls: enable secp384r1 elliptic curve support
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Felix Fietkau [Fri, 30 Dec 2016 11:38:06 +0000 (12:38 +0100)]
kirkwood: fix ubi partition name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 30 Dec 2016 10:55:16 +0000 (11:55 +0100)]
kirkwood: fix sysupgrade for non-dockstar NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Wed, 28 Dec 2016 22:15:52 +0000 (23:15 +0100)]
brcm47xx: drop standalone Netgear WGT634U profile
We have profile for this device thanks to DEVICE_PACKAGES now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
Rafał Miłecki [Wed, 28 Dec 2016 22:10:14 +0000 (23:10 +0100)]
brcm47xx: specify DEVICE_PACKAGES for Netgear WGT634U
This allows using it nicely with PER_DEVICE_ROOTFS.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
Rafał Miłecki [Thu, 29 Dec 2016 17:03:30 +0000 (18:03 +0100)]
bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit
741715331aee ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 29 Dec 2016 08:40:32 +0000 (09:40 +0100)]
brcm47xx: mips74k: fix typo in Netgear WN3000RP model name
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 28 Dec 2016 22:01:11 +0000 (23:01 +0100)]
ramips: fix NixcoreX1 profiles
There was a typo in Makefile that prevented using these profiles.
Fixes: a75ce960ac1 ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Wed, 28 Dec 2016 21:56:27 +0000 (22:56 +0100)]
mbedtls: enable support for external private RSA keys to fix openvpn build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sven Roederer [Tue, 27 Dec 2016 00:47:48 +0000 (01:47 +0100)]
linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in
9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in
018807d
this will also fix imagebuilder
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Felix Fietkau [Wed, 28 Dec 2016 00:10:37 +0000 (01:10 +0100)]
libressl: disable shared libraries, fixes build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 19:54:15 +0000 (20:54 +0100)]
ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 12:21:42 +0000 (13:21 +0100)]
relayd: fix expiry time handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 12:19:46 +0000 (13:19 +0100)]
relayd: fix reload / interface restart issues
- replace the hotplug script with an interface trigger
- add netdev params to procd to trigger restart
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 11:52:18 +0000 (12:52 +0100)]
kirkwood: enable initramfs images by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 11:18:12 +0000 (12:18 +0100)]
ath5k: drop bogus warning on drv_set_key with unsupported cipher (FS#334)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Dec 2016 11:10:53 +0000 (12:10 +0100)]
ath9k: remove old rx dma stop check optimization
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Tue, 27 Dec 2016 09:15:23 +0000 (10:15 +0100)]
odhcpd: bump to git HEAD
8dc2a59 Revert "Respect interface "ignore" settings as documented."
93ab25b router: skip parse_routes when ra_default > 1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Jo-Philipp Wich [Wed, 14 Sep 2016 18:50:35 +0000 (20:50 +0200)]
opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Tue, 27 Dec 2016 03:41:30 +0000 (04:41 +0100)]
Revert "opkg: vfork external gzip command to uncompress data"
This reverts commit
0090adcd5c94adad2168cd9b338f45827533c81d.
It breaks reading package list in /tmp/opkg-lists, making it impossible
to install packages from feeds in snapshots.
Hans Dedecker [Mon, 26 Dec 2016 21:21:52 +0000 (22:21 +0100)]
odhcpd: Use procd_send_signal in reload_service
Replace killall HUP by procd_send_signal in reload_service to trigger
an odhcpd config reload
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Mon, 26 Dec 2016 14:52:00 +0000 (15:52 +0100)]
opkg: add missing dependency on libpthread
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Gabe Rodriguez [Fri, 23 Dec 2016 12:51:55 +0000 (04:51 -0800)]
mwlwifi: Update to latest source
-MAC register revisions for 8864 firmware
Tested on WRT1900ACv1 (mvebu). No regressions
Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
Alberto Bursi [Sat, 24 Dec 2016 12:32:26 +0000 (13:32 +0100)]
package/Makefile & ipkg-make-index.sh: add full package data list
The external script used to generate the package lists for the
LEDE wiki's table of packages [1] and package indexes [2] requires
a "Source:" field in the package lists to find package makefiles.
The package makefiles are used to read the package's Category and Submenu.
The "Source:" field was removed in commit
b4aa3c899cbf1f81cd8a1ea197481ac84a9d646e
to reduce package list sizes and lessen opkg issues in low ram devices.
Add a separate package list file with full data to be used by the wiki's script.
It's called Packages.manifest and isn't compressed as it's not necessary.
1. https://lede-project.org/packages/start
2. https://lede-project.org/packages/index/start
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Koen Vandeputte [Thu, 22 Dec 2016 16:17:05 +0000 (17:17 +0100)]
musl: refresh patches
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 22 Dec 2016 16:17:04 +0000 (17:17 +0100)]
musl: backport various post-1.1.15 fixes
Backport most important fixes up to latest HEAD
- Taken post-commit reverts/fixes into account
Compile tested
Run-tested on cns3xxx & imx6 targets
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 22 Dec 2016 16:17:03 +0000 (17:17 +0100)]
musl: rename a custom backport patch
Ensure there is room in the numbering for next patches
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Jo-Philipp Wich [Wed, 14 Sep 2016 18:50:35 +0000 (20:50 +0200)]
opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 26 Dec 2016 10:11:18 +0000 (11:11 +0100)]
kernel: split kmod-lib-zlib into two packages to keep it in sync with kernel dependencies
Fixes build error on default config + selecting kmod-fs-isofs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Sun, 25 Dec 2016 19:56:45 +0000 (20:56 +0100)]
netifd: Upstep to git HEAD version
64a655d proto: allow configuring deprecated static IPv6 addresses
c99182e remove obsolete /opt/local prefix on Mac OS X
0249d5f system-linux: Don't set gre tunnel ttl by default to 64 (#FS312)
edc15ca ubus: Display the IPv6 prefix assigned address
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 23 Dec 2016 15:29:34 +0000 (16:29 +0100)]
gre: Remove ttl default value assignment (FS#312)
Don't assign a default ttl of 64 for gre tunnels as
netifd takes care of the default ttl assignment
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hauke Mehrtens [Sun, 25 Dec 2016 17:43:03 +0000 (18:43 +0100)]
ltq-vmmc: mark VOICE_CPE_VMMC_PMC as broken
We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The
vmmc driver will not compile with this option activated.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 25 Dec 2016 14:19:20 +0000 (15:19 +0100)]
ppc44x: fix build of crypto4xx_core.c
crypto4xx_probe() is in the __init section and referenced by code form
other sections, which causes a build error. Backport a patch from
mainline kernel to fix this.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 25 Dec 2016 14:15:55 +0000 (15:15 +0100)]
kmod-sched-cake: do not build on kernel 3.18
kmod-sched-cake does not build on kernel 3.18, so add the dependency to
not even try.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Crispin [Sun, 25 Dec 2016 08:52:11 +0000 (09:52 +0100)]
lantiq: fix falcon build
The following commit changed the build templates name but forgot to
update the TARGET_DEVICES variable properly.
commit
f9226158bed52aeae408730 (lantiq: rename EASY98000 to EASY98000NOR)
Signed-off-by: John Crispin <john@phrozen.org>
Hauke Mehrtens [Sat, 17 Dec 2016 22:34:17 +0000 (23:34 +0100)]
lantiq: rename EASY98000 to EASY98000NOR
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 17 Dec 2016 14:00:59 +0000 (15:00 +0100)]
kernel: add KERNEL_DEVMEM and KERNEL_DEVKMEM
These options are needed to create /dev/mem or /dev/kmem .
/dev/mem is needed by the io tool to access raw hardware memory, which
is helpful when debugging and developing drivers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Felix Fietkau [Sat, 24 Dec 2016 11:10:31 +0000 (12:10 +0100)]
brcmfmac: select 802.11ac support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 24 Dec 2016 09:39:36 +0000 (10:39 +0100)]
rb532: remove linux 4.1 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Fainelli [Sat, 24 Dec 2016 04:36:00 +0000 (20:36 -0800)]
rb532: Switch to kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sat, 24 Dec 2016 04:35:59 +0000 (20:35 -0800)]
rb532: Backport fix to resolve oops during korina_restart
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sat, 24 Dec 2016 04:35:58 +0000 (20:35 -0800)]
rb532: Add support for kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sat, 24 Dec 2016 04:35:57 +0000 (20:35 -0800)]
rb532: Fix initramfs kernel images
The generic lzma-loader uses vmlinux.lzma as an input to compress so we
need to provide a lzma compressed version of the initramfs kernel.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Syrone Wong [Sat, 24 Dec 2016 09:09:35 +0000 (17:09 +0800)]
toolchain/gcc: update 6.x to 6.3.0
This is a bugfix release
Build and run tested on mvebu/Linksys WRT1900AC v1
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Zefir Kurtisi [Thu, 22 Dec 2016 09:39:51 +0000 (10:39 +0100)]
libpcap: Fix build when PACKAGECONFIG ipv6 is not enabled
Add patches provided upstream [1] by Fabio Berton to fix error:
> ./gencode.c: In function 'pcap_compile':
> ./gencode.c:693:8: error: 'compiler_state_t {aka struct _compiler_state}' has no member named 'ai'
> cstate.ai = NULL;
> ^
> ./gencode.c: In function 'gen_gateway':
> ./gencode.c:4914:13: error: 'cstate' undeclared (first use in this function)
> bpf_error(cstate, "direction applied to 'gateway'");
> ^
[1] https://github.com/the-tcpdump-group/libpcap/pull/541
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Mathias Kresin [Thu, 22 Dec 2016 08:18:05 +0000 (09:18 +0100)]
lantiq: drop the FRITZ7360SL led-dsl alias
The power LED can not be used for indicating the xDSL line state and
the in system (boot) state at the same time in LEDE. As soon as the
xDSL Line goes down, the power LED is switched off.
During xDSL handshake the power led would blink with the same or a
similar pattern as during boot.
Both might confuse users.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Wed, 21 Dec 2016 08:59:29 +0000 (09:59 +0100)]
lantiq: add FRITZ7360SL phy reset gpios
Due to a hardware bug of Atheros 8030 phys, the driver need to reset
the phys on link state change.
Use the correct compatible string for the at903x phys connected to
switch port 0 and 1.
Fix the pinmux of the gpio lines connected to the reset pin of the phys
and define the reset-pins to let the driver do the fixups.
Fixes FS#343
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 15 Dec 2016 08:45:54 +0000 (09:45 +0100)]
lantiq: fix DGN1000B boot status leds
The alias node should not be a child of the chosen node.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 21 Nov 2016 07:46:48 +0000 (08:46 +0100)]
ramips: use new image build code for more devices
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 23 Dec 2016 08:46:48 +0000 (09:46 +0100)]
ramips: use different board names for variants
Use different names for flash size related board variants, to make sure
that only images for the actual flash size are considered as valid by
the image validation code.
Remove the flash size suffix from the string returned by
ramips_board_detect() to ensure that existing scripts relying on the
former used boardname are still working.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Nov 2016 09:46:20 +0000 (10:46 +0100)]
ramips: sort rt305x image file alphabetical
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 25 Nov 2016 12:25:29 +0000 (13:25 +0100)]
ramips: use D-Link DIR-600 B1 image for B2 version
Everything set for the B1 is identical to the values uses for the B2
version.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 1 Dec 2016 06:37:03 +0000 (07:37 +0100)]
ramips: fix image validation errors
The name from the Device define will be used in the metadata. Due to
typos/different spelling, this name might not match the one exported in
/lib/ramips.sh.
Fix all name mismatches which were found by checking if the name used
in the metadata exists in /lib/ramips.sh.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 23 Dec 2016 07:21:31 +0000 (08:21 +0100)]
ramips: use destinct 11AC NAS board name
Use a distinct board name even if the board is near to identical to
the WeVO W2914NS v2.
To make sure that a 11AC NAS image can not be installed on a
WeVO W2914NS v2, both board need to use different names.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Felix Fietkau [Thu, 22 Dec 2016 16:35:04 +0000 (17:35 +0100)]
orion: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 16:34:45 +0000 (17:34 +0100)]
orion: enable SoC drivers in the kernel config
Clean up packaged modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 16:26:27 +0000 (17:26 +0100)]
kirkwood: clean up profiles, move to image makefile
Adds support for per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 16:19:29 +0000 (17:19 +0100)]
kirkwood: enable SoC drivers in the kernel config
Clean up packaged modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 16:04:12 +0000 (17:04 +0100)]
kirkwood: clean up FEATURES
Remove dt: it is implicitly enabled based on the kernel config
Remove tar.gz and jffs2_nand: Legacy build code has been removed,
NAND devices are only supported with UBI now.
Remove ubifs: deprecated, use squashfs images instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 14:35:16 +0000 (15:35 +0100)]
kirkwood: remove legacy image build code
This has been mostly non-functional for a while now
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 14:07:38 +0000 (15:07 +0100)]
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code
Update the correspoding u-boot configs to stop relying on
kernel-in-rootfs, which was removed a while back
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Dec 2016 15:23:15 +0000 (16:23 +0100)]
toolchain: remove ppl/cloog, disable graphite for gcc 4.8
graphite is disabled by default and it's not worth carrying ppl and
cloog for supporting this feature on the old gcc 4.8, which is only used
for ARC
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Fainelli [Fri, 9 Dec 2016 03:31:41 +0000 (19:31 -0800)]
kernel: Add kmod-ethoc
Add the kernel module package for the Opencores.org Ethernet MAC,
depends on PHYLIB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>