openwrt/staging/dedeckeh.git
3 years agobcm4908: backport brcmstb USB PHY driver changes
Rafał Miłecki [Thu, 14 Jan 2021 11:13:49 +0000 (12:13 +0100)]
bcm4908: backport brcmstb USB PHY driver changes

This includes BCM4908 support

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agohostapd: fix key_mgmt typo
Leon M. George [Tue, 12 Jan 2021 08:38:02 +0000 (09:38 +0100)]
hostapd: fix key_mgmt typo

The key_mgmt variable was mistyped when checking against "WPS", so
the if clause was never entered.

Fixes: f5753aae233f ("hostapd: add support for WPS pushbutton station")
Signed-off-by: Leon M. George <leon@georgemail.eu>
[add commit message, bump PKG_RELEASE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agohostapd: remove trailing whitespaces
Leon M. George [Tue, 12 Jan 2021 09:32:06 +0000 (10:32 +0100)]
hostapd: remove trailing whitespaces

Signed-off-by: Leon M. George <leon@georgemail.eu>
3 years agohostapd: remove unused variable
Leon M. George [Tue, 12 Jan 2021 09:07:44 +0000 (10:07 +0100)]
hostapd: remove unused variable

'base' was never used.

Fixes: 498d84fc4e00 ("netifd: add wireless configuration support
and port mac80211 to the new framework")

Signed-off-by: Leon M. George <leon@georgemail.eu>
3 years agohostapd: remove unused variable
Leon M. George [Tue, 12 Jan 2021 08:47:47 +0000 (09:47 +0100)]
hostapd: remove unused variable

'enc_str' was never used.

Fixes: 498d84fc4e00 ("netifd: add wireless configuration support
and port mac80211 to the new framework")

Signed-off-by: Leon M. George <leon@georgemail.eu>
3 years agohostapd: run as user 'network' if procd-ujail is installed
Daniel Golle [Sun, 10 Jan 2021 19:12:05 +0000 (19:12 +0000)]
hostapd: run as user 'network' if procd-ujail is installed

Granting capabilities CAP_NET_ADMIN and CAP_NET_RAW allows running
hostapd and wpa_supplicant without root priviledges.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agomac80211: improve error handling when adding hostapd config
Daniel Golle [Tue, 12 Jan 2021 00:29:18 +0000 (00:29 +0000)]
mac80211: improve error handling when adding hostapd config

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agohostapd: improve error handling when adding supplicant config
Daniel Golle [Tue, 12 Jan 2021 00:28:17 +0000 (00:28 +0000)]
hostapd: improve error handling when adding supplicant config

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agohostapd: add multicast_to_unicast and per_sta_vif
Etan Kissling [Wed, 13 Jan 2021 08:52:02 +0000 (09:52 +0100)]
hostapd: add multicast_to_unicast and per_sta_vif

This allows configuration of multicast_to_unicast and per_sta_vif options.
- multicast_to_unicast requests multicast-to-unicast conversion.
- per_sta_vif assigns each station its own AP_VLAN interface.

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
3 years agombedtls: add config option to compile with hkdf
Etan Kissling [Wed, 13 Jan 2021 00:01:24 +0000 (01:01 +0100)]
mbedtls: add config option to compile with hkdf

This adds a config option to allow compiling with HKDF algorithm support
to support applications that require this feature.

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
3 years agonf-conntrack: allow querying conntrack info in nfqueue
Etan Kissling [Tue, 12 Jan 2021 23:54:08 +0000 (00:54 +0100)]
nf-conntrack: allow querying conntrack info in nfqueue

This allows libnetfilter_queue to access connection tracking information
by requesting NFQA_CFG_F_CONNTRACK. Connection tracking information is
provided in the NFQA_CT attribute.
CONFIG_NETFILTER_NETLINK_GLUE_CT enables the interaction between
nf_queue and nf_conntrack_netlink. Without this option, trying to access
connection tracking information results in "Operation not supported".

Signed-off-by: Etan Kissling <etan_kissling@apple.com>
3 years agokernel: drop unneeded kernel version dependency
Andy Walsh [Mon, 11 Jan 2021 14:22:30 +0000 (15:22 +0100)]
kernel: drop unneeded kernel version dependency

The current master only supports kernel 5.4, and there is no reason
to remove KERNEL_IO_URING for future kernels.

Drop the unneeded dependency.

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
[improve commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agozstd: fix package source
David Bauer [Mon, 7 Dec 2020 03:53:02 +0000 (04:53 +0100)]
zstd: fix package source

It looks like GitHub changed the URL path for release tarballs, thus the
download for the zstd package was always falling back to the OpenWrt
sources mirror.

Fix the GitHub URL for one which works. The file hash remains unchanged.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agouboot-envtools: add support for Aruba AP-303 and AP-365
Jan Alexander [Sat, 9 Jan 2021 10:33:34 +0000 (11:33 +0100)]
uboot-envtools: add support for Aruba AP-303 and AP-365

Both devices use u-boot env variables to boot OpenWrt from its flash
partition. Using u-boot envtools, it is possible to change the bootcmd
back to the stock firmware partition directly from OpenWrt without
attaching a serial cable or even physically accessing the device.

Signed-off-by: Jan Alexander <jan@nalx.net>
3 years agoipq806x: add support for Ubiquiti UniFi AC HD
Jan Alexander [Mon, 30 Nov 2020 10:51:16 +0000 (11:51 +0100)]
ipq806x: add support for Ubiquiti UniFi AC HD

Hardware
--------

SoC:   Qualcomm IPQ8064
RAM:   512MB DDR3
Flash: 256MB NAND (Micron MT29F2G08ABBEAH4)
       32MB SPI-NOR (Macronix MX25U25635F)
WLAN:  Qualcomm Atheros QCA9994 4T4R b/g/n
       Qualcomm Atheros QCA9994 4T4R a/n/ac
ETH:   eth0 - SECONDARY (Atheros AR8033)
       eth1 - MAIN (Atheros AR8033)
USB:   USB-C
LED:   Dome (white / blue)
BTN:   Reset

Installation
------------

Copy the OpenWrt sysupgrade image to the /tmp directory of the device
using scp. Default IP address is 192.168.1.20 and default username and
password are "ubnt".

SSH to the device and write the bootselect flag to ensure it is booting
from the mtd partition the OpenWrt image will be written to. Verify the
output device below matches mtd partition "bootselect" using /proc/mtd.

> dd if=/dev/zero bs=1 count=1 seek=7 conv=notrunc of=/dev/mtd11

Write the OpenWrt sysupgrade image to the mtd partition labeled
"kernel0". Also verify the used partition device using /proc/mtd.

> dd if=/tmp/sysupgrade.bin of=/dev/mtdblock12

Reboot the device.

Back to stock
-------------

Use the TFTP recovery procedure with the Ubiquiti firmware image to
restore the vendor firmware.

Signed-off-by: Jan Alexander <jan@nalx.net>
3 years agouboot-rockchip: update NanoPi R2S patches
David Bauer [Tue, 12 Jan 2021 23:33:10 +0000 (00:33 +0100)]
uboot-rockchip: update NanoPi R2S patches

Update the NanoPi R2S to the latest version submitted
upstream.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agouboot-rockchip: update to v2021.01
Marty Jones [Mon, 11 Jan 2021 23:35:29 +0000 (18:35 -0500)]
uboot-rockchip: update to v2021.01

Update the U-Boot to version v2021.01.

Run-tested: FriendlyARM NanoPi R2S
            Radxa Rock Pi 4
            Pine64 RockPro64

Signed-off-by: Marty Jones <mj8263788@gmail.com>
[format commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agoiw: enable HE PHY information for iw-tiny
David Bauer [Sun, 3 Jan 2021 20:43:57 +0000 (21:43 +0100)]
iw: enable HE PHY information for iw-tiny

Currently PHY information obtained from "iw phy" lacks information about
a PHYs HE capabilities when using the by default installed iw-tiny.

As there are already 802.11ax supported devices, enabled printing this
information for the by-default installed iw variant.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agobcm4908: backport BCM4908 integrated switch initial support
Rafał Miłecki [Wed, 13 Jan 2021 10:01:13 +0000 (11:01 +0100)]
bcm4908: backport BCM4908 integrated switch initial support

Upstream driver supports bridging ports. There is no support for
crossbar setup or CPU port(s) yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm4908: backport PMB (Power Management Bus) driver
Rafał Miłecki [Wed, 13 Jan 2021 06:41:34 +0000 (07:41 +0100)]
bcm4908: backport PMB (Power Management Bus) driver

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm4908: add simple PCIe reset controller support
Rafał Miłecki [Tue, 12 Jan 2021 22:27:08 +0000 (23:27 +0100)]
bcm4908: add simple PCIe reset controller support

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm4908: backport upstream DTS patches
Rafał Miłecki [Tue, 12 Jan 2021 22:03:41 +0000 (23:03 +0100)]
bcm4908: backport upstream DTS patches

1. Netgear R8000P DTS file
2. NAND fix
3. PCIe reset block
4. Integrated switch
5. PMB block

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agobcm4908: initial work on the Broadcom BCM4908 target
Rafał Miłecki [Fri, 8 Jan 2021 12:32:37 +0000 (13:32 +0100)]
bcm4908: initial work on the Broadcom BCM4908 target

BCM4906, BCM4908 and BCM49408 are SoCs with 64 bit ARMv8 B53 CPUs.
Upstream Linux is slowly getting support for that SoCs family so it
makes sense to add target for it.

This prepares initial support for:

1. Asus GT-AC5300
BCM4908 based device (4 CPUs) with 1024 MiB RAM, NAND, 8 LAN ports.

2. Netgear R8000P
BCM4906 based device (2 CPUs) with 512 MiB RAM, NAND, 4 LAN ports.

Flashing info will come later as we learn how to generate proper images.

It isn't usable yet (it only produces a bootable kernel) so "source-only"
is used.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 years agokernel: enable SRv6 support by enabling lwtunnel
Nick Hainke [Sat, 12 Dec 2020 10:23:54 +0000 (11:23 +0100)]
kernel: enable SRv6 support by enabling lwtunnel

Enable the ability to use segment routing based on IPv6. It allows the
packet to specify a path that the packet should take through the
network.

Lwtunnel allow an easy encapsulation of a package. You can just install
ip-full package and use it:

  ip -6 route add  2003::/64 dev eth0 encap seg6 mode encap \
    segs 2001::1,2002::2

An IPv6 package looks like this:
  [IPv6 HDR][IPv6 RH][IPv6 HDR][Data...]

Netifd support:
  https://git.openwrt.org/?p=project/netifd.git;
     a=commit;h=458b1a7e9473c150a40cae5d8be174f4bb03bd39

Increases imagesize by 24.125 KiB. Therefore, only enable for devices
with enough flash.

Signed-off-by: Nick Hainke <vincent@systemli.org>
3 years agotools/ccache: find libzstd using rpath
Thomas Nixon [Sat, 9 Jan 2021 22:04:48 +0000 (22:04 +0000)]
tools/ccache: find libzstd using rpath

Previously, ccache would end up using the system libzstd, which is not
supposed to be a build requirement.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
3 years agorockchip: add missing Kconfig symbols
David Bauer [Mon, 11 Jan 2021 04:57:52 +0000 (05:57 +0100)]
rockchip: add missing Kconfig symbols

When compiling with CONFIG_ALL_KMODS enabled, compilation might stall
due to unset rockchip-specific config symbols. Disable these to avoid
stalling this step.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agoqemu: remove obsolete package
Paul Spooren [Thu, 31 Dec 2020 04:11:54 +0000 (18:11 -1000)]
qemu: remove obsolete package

Instead of using an ancient qemu version in-tree the building machine
should just have qemu-utils installed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agobuild/image: warn if missing qemu-img for VDI/VMDK
Paul Spooren [Wed, 30 Dec 2020 19:08:17 +0000 (09:08 -1000)]
build/image: warn if missing qemu-img for VDI/VMDK

Currently `qemu-img` is used to convert raw x86 images to VDI and VMDK
images, used for virtual machines.

Having `qemu-img` in tree requires us to maintain an ancient version of
`qemu-utils`, which recently required extra work to compile with newer
compiler version.

This commit prints a warning message in case `qemu-img` is missing.

As a next step the in-tree version of `qemu-img` can be removed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agomac80211: use hostapd PID returned from config_add
Daniel Golle [Mon, 7 Dec 2020 13:46:43 +0000 (13:46 +0000)]
mac80211: use hostapd PID returned from config_add

Use PID returned from config_add instead of querying procd when adding
configuration to hostapd.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agohostapd: return PID on config_add call
Daniel Golle [Mon, 7 Dec 2020 13:12:46 +0000 (13:12 +0000)]
hostapd: return PID on config_add call

To simplify the way netifd acquires the PIDs of wpa_supplicant and
hostapd let the config_add method of both of them return the PID of the
called process. Use the returned PID instead of querying procd when
adding wpa_supplicant configuration.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoglibc: update to latest 2.32 commit (BZ #24973)
Hans Dedecker [Sun, 10 Jan 2021 12:11:06 +0000 (13:11 +0100)]
glibc: update to latest 2.32 commit (BZ #24973)

0d9793e82a Fix buffer overrun in EUC-KR conversion module (bz #24973)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 years agokernel-defaults: Manage the enabling/disabling of ZSTD
Florian Fainelli [Sun, 13 Sep 2020 02:48:34 +0000 (19:48 -0700)]
kernel-defaults: Manage the enabling/disabling of ZSTD

Linux 5.9 introduces support for ZSTD ramdisk and initrd compression,
make sure we enable/disable the relevant options when building an
initramfs enabled kernel.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
3 years agokernel-defaults: Delete external source tree user_headers
Florian Fainelli [Sun, 13 Sep 2020 00:09:53 +0000 (17:09 -0700)]
kernel-defaults: Delete external source tree user_headers

When we use an external kernel tree which may not have been fully
cleaned, there may be user_headers left which do not match the target
architecture, leading to build failures for packages that do an explicit
inclusion of user_headers (such as iproute2 or iptables). Make sure we
delete them while preparing the directory.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
3 years agoiptables: update to 1.8.6
Curtis Deptuck [Thu, 3 Dec 2020 00:28:39 +0000 (17:28 -0700)]
iptables: update to 1.8.6

Update iptables to 1.8.6

ChangeLog:
https://netfilter.org/projects/iptables/files/changes-iptables-1.8.6.txt

Refresh patch:
101-remove-check-already.patch

Signed-off-by: Curtis Deptuck <curtdept@me.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patches]
3 years agokernel: bump 5.4 to 5.4.87
John Audia [Wed, 6 Jan 2021 17:37:16 +0000 (12:37 -0500)]
kernel: bump 5.4 to 5.4.87

All modification by update_kernel.sh.

Build system: x86_64
Build-tested: ipq806x/R7800, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Compile-tested [*]: ath79/{generic,tiny}, ipq40xx, octeon,
                    ramips/mt7621, realtek, x86/64.
Run-tested [*]:     ramips/mt7621 (DIR-878 A1, R6800, RT-AC57U),
                    octeon (EdgeRouter Lite).

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
3 years agorealtek: add support for ZyXEL GS1900-8HP v1 and v2
Stijn Segers [Fri, 8 Jan 2021 13:32:48 +0000 (14:32 +0100)]
realtek: add support for ZyXEL GS1900-8HP v1 and v2

The ZyXEL GS1900-8HP is an 8 port gigabit switch with PoE+ support.
There are two versions on the market (v1 & v2) which share similar
specs (same flash size and flash layout, same RAM size, same PoE+ power
envelope) but have a different case and board layout that they each
share with other GS1900 siblings.

The v1 seems to share its PCB and case with non-PoE GS1900-8; as such,
adding support for the GS1900-8 would probably be trivial. The v2 seems
to share its casing and platform with its already supported bigger
brother, the GS1900-10HP - its board looks the same, except for two
holes where the GS1900-10 has its SFP ports.

Like their 10 port sibling, both devices have a dual firmware layout.
Both GS1900-8HP boards have the same 70W PoE+ power budget. In order to
manipulate the PoE+, one needs the rtl83xx-poe package [1].

After careful consideration it was decided to go with separate images
for each version.

Specifications (v1)
-------------------
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Nanya NT5TU128M8HE-AC 128 MiB DDR2 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* PoE+:      Broadcom BCM59111KMLG (IEEE 802.3at-2009 compliant, 2x)
* UART:      1 serial header with populated standard pin connector on the
             left side of the PCB, towards the bottom. Pins are labeled:
             + VCC (3.3V)
             + TX
             + RX
             + GND

Specifications (v2)
-------------------
* SoC:       Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash:     Macronix MX25L12835F 16 MiB
* RAM:       Samsung K4B1G0846G 128 MiB DDR3 SDRAM
* Ethernet:  8x 10/100/1000 Mbit
* PoE+:      Broadcom BCM59121B0KMLG (IEEE 802.3at-2009 compliant)
* UART:      1 angled serial header with populated standard pin connector
             accessible from outside through the ventilation slits on the
             side. Pins from top to bottom are clearly marked on the PCB:
             + VCC (3.3V)
             + TX
             + RX
             + GND

Serial connection parameters for both devices: 115200 8N1.

Installation
------------
Instructions are identical to those for the GS1900-10HP and apply both
to the GS1900-8HP v1 and v2 as well.

* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
  image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
  space bar, and enable the network:
  > rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
  OEM firmware on the backup partition for the time being. OpenWrt can
  only boot off the first partition anyway (hardcoded in the DTS). To
  make sure we are manipulating the first partition, issue the following
  commands:
  > setsys bootpartition 0
  > savesys
* Download the image onto the device and boot from it:
  > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8hp-v{1,2}-initramfs-kernel.bin
  > bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
  > sysupgrade /tmp//tmp/openwrt-realtek-generic-zyxel_gs1900-8hp-v{1,2}-squashfs-sysupgrade.bin

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
[merge PoE case, keep device definitions separate, change all those
hashes in the commit message to something else so they don't get
removed when changing the commit ...]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agorealtek: remove model prefix from LED label for ZyXEL GS1900
Adrian Schmutzler [Fri, 8 Jan 2021 19:37:37 +0000 (20:37 +0100)]
realtek: remove model prefix from LED label for ZyXEL GS1900

This is used as fixed status LED, so no migration is needed.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agorealtek: introduce shared DTSI for GS1900 series
Stijn Segers [Fri, 8 Jan 2021 13:32:47 +0000 (14:32 +0100)]
realtek: introduce shared DTSI for GS1900 series

The ZyXEL GS1900-8HP v1, v2 and GS1900-10HP are all built on a similar
Realtek RTL8380M platform. Create a common DTSI in preparation for
GS1900-8HP support, and switch to the macros defined in rtl838x.dtsi.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
[drop redundant includes, use &mdio directly, do not replace SFP
ports]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agokernel: add hid-cp2112 driver support
Pawel Dembicki [Mon, 4 Jan 2021 16:59:30 +0000 (17:59 +0100)]
kernel: add hid-cp2112 driver support

This patch adds kernel module for Silicon Labs CP2112 HID USB to SMBus
Master Bridge. This is a HID device driver which registers as an i2c
adapter and gpiochip to expose these functions of the CP2112.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
3 years agoramips: remove trailing whitespace in Makefiles
Leon M. George [Tue, 5 Jan 2021 09:42:34 +0000 (10:42 +0100)]
ramips: remove trailing whitespace in Makefiles

Remove trailing whitespaces in two *.mk files.

Signed-off-by: Leon M. George <leon@georgemail.eu>
[fix title, add message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agorealtek: ZyXEL: spell as done by manufacturer
Stijn Segers [Wed, 6 Jan 2021 21:45:19 +0000 (22:45 +0100)]
realtek: ZyXEL: spell as done by manufacturer

ZyXEL spells its own name all uppercase with just the Y lowercase. Adapt
the realtek target to follow this (other OpenWrt targets already do so).

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
3 years agorealtek: move memory node to device DTS
Stijn Segers [Wed, 6 Jan 2021 21:45:18 +0000 (22:45 +0100)]
realtek: move memory node to device DTS

Move the memory out of the rtl838x.dtsi and into the device family DTSI
or device DTS if applicable. This aligns with upstream practice.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
[add missing block for dgs-1210-10p, move block below chosen node]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agorealtek: remove duplicate '/dts-v1/;' identifier
Adrian Schmutzler [Thu, 7 Jan 2021 18:30:36 +0000 (19:30 +0100)]
realtek: remove duplicate '/dts-v1/;' identifier

The identifier is already present in rtl838x.dtsi, and adding it
twice is not only redundant but actually wrong.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agorealtek: set PoE power budget for ZyXEL GS1900-10HP
Stijn Segers [Wed, 6 Jan 2021 21:45:17 +0000 (22:45 +0100)]
realtek: set PoE power budget for ZyXEL GS1900-10HP

As per the manufacturer's specifications, set the GS1900-10HP PoE power
budget to 77W.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
3 years agobase-files: read all 3 bytes in get_magic_vfat() at once
Adrian Schmutzler [Mon, 4 Jan 2021 00:28:44 +0000 (01:28 +0100)]
base-files: read all 3 bytes in get_magic_vfat() at once

While the speed improvement might be negligible, there is still no
reason to read individual bytes.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoath79: make Engenius fakeroot partitions read-only
Michael Pratt [Fri, 1 Jan 2021 22:08:34 +0000 (17:08 -0500)]
ath79: make Engenius fakeroot partitions read-only

For:

 - ENH202 v1
 - ENS202EXT v1

These boards were committed before it was discovered
that for all Engenius boards with a "failsafe" image,
forcing the failsafe image to load next boot
can be achieved by editing the u-boot environment like:

  `fw_setenv rootfs_checksum 0`

So it's not necessary to delete a partition to boot to failsafe image.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
3 years agoath79: move small-flash Engenius boards to tiny
Michael Pratt [Fri, 1 Jan 2021 21:48:52 +0000 (16:48 -0500)]
ath79: move small-flash Engenius boards to tiny

This moves some of the Engenius boards from generic to tiny:

 - EAP350 v1
 - ECB350 v1
 - ENH202 v1

For these, factory.bin builds are already failing on master
branch because of the unique situation for these boards:

 - 8 MB flash
 - an extra "failsafe" image for recovery
 - TFTP does not work (barely possible with 600 MTU)
 - bootloader loads image from a longer flash offset
 - 1 eraseblock each needed for OKLI kernel loader and fake rootfs
 - using mtd-concat to make use of remaining space...

The manual alternative would be removing the failsafe partition.
However this comes with the risk of extremely difficult recovery
if a flash ever fails because TFTP on the bootloader is bugged.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoimx6: disable unrequired pcie host driver
Koen Vandeputte [Thu, 7 Jan 2021 10:34:45 +0000 (11:34 +0100)]
imx6: disable unrequired pcie host driver

imx6 has it's own pcie host driver so we do
not need the one from DW.

This fixes following boot error:

[    0.156913] dw-pcie 1ffc000.pcie: IRQ index 1 not found

Fixes: 6d5291ff7244 ("imx6: add support for kernel 5.4")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agoimx6: refresh kernel config
Koen Vandeputte [Thu, 7 Jan 2021 10:28:27 +0000 (11:28 +0100)]
imx6: refresh kernel config

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agoimx6: gw52xx: fix duplicate regulator naming
Koen Vandeputte [Thu, 7 Jan 2021 09:22:54 +0000 (10:22 +0100)]
imx6: gw52xx: fix duplicate regulator naming

2 regulator descriptions carry identical naming.

This leads to following boot warning:
[    0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present!

Fix this by renaming the one used for audio.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agotools/cmake: always use non-ccache CC and CXX variables
Sven Wegener [Fri, 1 Jan 2021 11:27:33 +0000 (12:27 +0100)]
tools/cmake: always use non-ccache CC and CXX variables

cmake is a dependency of ccache, which means it is build before ccache
is available and hence must be build with non-ccache CC and CXX. It
currently works, because the cmake build system splits the compiler
variable and treats them as multiple compilers to check.

For "ccache gcc" it first tests for "ccache", which always fails,
because ccache is not a compiler by itself, even if it is available, and
then ends up calling "gcc" alone, effectively never using ccache.

Let's make this explicit by forcing the use of non-ccache CC and CXX.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
3 years agolua: add -ldl for glibc builds
Rosen Penev [Sat, 2 Jan 2021 23:56:25 +0000 (15:56 -0800)]
lua: add -ldl for glibc builds

For glibc, lua needs an explicit link to libdl as glibc has it separate

Fixes the following error in at least collectd:

ld: usr/lib/liblua.so: undefined reference to `dlopen'
ld: usr/lib/liblua.so: undefined reference to `dlclose'
ld: usr/lib/liblua.so: undefined reference to `dlerror'
ld: usr/lib/liblua.so: undefined reference to `dlsym'

Signed-off-by: Rosen Penev <rosenp@gmail.com>
3 years agobuild: use ccache -C for cleaning the cache
Sven Wegener [Fri, 1 Jan 2021 10:46:04 +0000 (11:46 +0100)]
build: use ccache -C for cleaning the cache

This keeps the configuration, like the size of the cache, and the
statistics intact. Move the removal of the cache directory to the
distclean target, but only delete the .ccache directory inside of our
build tree, as we should not mess with a user-configured external ccache
directory this destructively.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
3 years agorpcd: update to git HEAD
Daniel Golle [Tue, 5 Jan 2021 20:02:52 +0000 (20:02 +0000)]
rpcd: update to git HEAD

 fd017ba iwinfo: add ht and vht operation info to wifi scan
 4c66b31 iwinfo: export center channel for info ubus call
 e28d4a5 iwinfo: add support for 802.11ad and GCMP
 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware
 ea7f471 iwinfo: include ht_operation data only if available

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoiwinfo: improve ABI version handling and bump to git HEAD
Jo-Philipp Wich [Wed, 6 Jan 2021 22:26:15 +0000 (23:26 +0100)]
iwinfo: improve ABI version handling and bump to git HEAD

 - Encode ABI version in compiled shared object file
 - Only ship versioned shared library

 a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT
 ea28dfb iwinfo: export ht and vht operation in scan results
 4e22953 iwinfo: export center_chan info for local wifi
 74d13fb cli: account for additional digit for frequencies above 10GHz
 8bfd8d8 iwinfo: add support for GCMP cipher
 618c1e8 iwinfo: add hardware description for QCA MIPS WiSoCs
 0702f32 iwinfo: improve center channel handling
 51c1336 iwinfo: set center chan unsupported for not-nl80211 driver
 23d2722 build: add ability to specify shared object version

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoscripts/feed: no warn on toolchain/linux overwrite
Paul Spooren [Sun, 27 Dec 2020 21:26:37 +0000 (11:26 -1000)]
scripts/feed: no warn on toolchain/linux overwrite

The recent 7f285d "scripts/feeds: warn when skipping core package
override" floods SDK output with warning of overwriting "linux" and
"toolchain" core packages. This should be ignored as these are not
regular packages added via feeds.

While at it slightly improve the warning string.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agoipq806x: add space before SPDX identifier (again)
Adrian Schmutzler [Wed, 6 Jan 2021 22:53:25 +0000 (23:53 +0100)]
ipq806x: add space before SPDX identifier (again)

Strictly, an SPDX identifier requires a space between the comment
marker and the identifier itself. This has been addressed in
b69c21738e29 ("treewide: add space before SPDX identifier"), but
some new malformatted identifiers were merged recently.

This could have been prevented by using checkpatch.pl earlier.

Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
Fixes: 8ddaeaf6424e ("ipq806x: create DTSI for TP-Link AD7200 and C2600")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoipq806x: improve model name and revision for TP-Link AD7200
Adrian Schmutzler [Wed, 6 Jan 2021 13:00:58 +0000 (14:00 +0100)]
ipq806x: improve model name and revision for TP-Link AD7200

The TP-Link AD7200 appears with and without the "Talon" model name
prefix. Let's use both variants for 'make menuconfig' so everybody
can locate the device.

Concerning the revision, the TP-Link page lists v1 and v2 with the
device currently marked as "End of Life". However, the v2 and latest
v1 firmware are byte-identical. Thus, we only need one image for
this device and do not need to include the revision in the image name.

While at it, remove the useless BOARD_NAME variable which only makes
sense in combination with upgrade from legacy stable versions or when
custom upgrade scripts are involved.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoipq806x: create DTSI for TP-Link AD7200 and C2600
Adrian Schmutzler [Wed, 6 Jan 2021 00:05:39 +0000 (01:05 +0100)]
ipq806x: create DTSI for TP-Link AD7200 and C2600

Both devices share most of their setup except buttons and LEDs,
so having a common DTSI removes a lot of duplicate code.

In order to have a shared partitioning scheme, device-id and
product-info from AD7200 have been merged into a single
product-info partition like for C2600.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoipq806x: clean up DTS file for TP-Link AD7200
Adrian Schmutzler [Tue, 5 Jan 2021 23:50:09 +0000 (00:50 +0100)]
ipq806x: clean up DTS file for TP-Link AD7200

This does several cosmetic adjustments for AD7200's DTS:

 - Make node name, DT label and label property consistent
 - Drop wrong and unused spi4 label
 - Use generic flash@0 node name

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoRevert "iwinfo: update to git HEAD"
Jo-Philipp Wich [Wed, 6 Jan 2021 12:41:51 +0000 (13:41 +0100)]
Revert "iwinfo: update to git HEAD"

This reverts commit f1620630e9f3407780ddc554361841f05c996c49.

This update introduces potentially remote exploitable buffer overreads
in IE parsing logic.

It also breaks the ABI without introdcing SOVERSION library versioning.

Furthermore, HT information is incorrectly added for non-HT BSSes.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agoRevert "rpcd: update to git HEAD"
Jo-Philipp Wich [Wed, 6 Jan 2021 12:38:24 +0000 (13:38 +0100)]
Revert "rpcd: update to git HEAD"

This reverts commit 190e7939639846b86ab487c50169963382720e2b.

This update introduces a potential null-pointer deref with subsequent rpcd
crash when querying wireless info for non-nl80211 wdevs.

Additionally it wrongly includes ht frequency information for non-ht BSSes.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agoramips: limit 5GHz channels for UniFi 6 Lite
David Bauer [Tue, 5 Jan 2021 23:00:01 +0000 (00:00 +0100)]
ramips: limit 5GHz channels for UniFi 6 Lite

The MT7915 radio currently advertises 2.4GHz channels while the antenna
path only supports 5 GHz. Limit the radio to 5GHz channels to prevent
users from configuring non-supported channels.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agorpcd: update to git HEAD
Daniel Golle [Tue, 5 Jan 2021 20:02:52 +0000 (20:02 +0000)]
rpcd: update to git HEAD

 fd017ba iwinfo: add ht and vht operation info to wifi scan
 4c66b31 iwinfo: export center channel for info ubus call
 e28d4a5 iwinfo: add support for 802.11ad and GCMP
 5c15f57 iwinfo: return hwmode 'ad' on 802.11ad-only hardware

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoiwinfo: update to git HEAD
Daniel Golle [Tue, 5 Jan 2021 20:04:22 +0000 (20:04 +0000)]
iwinfo: update to git HEAD

 a17f561 iwinfo: detect QCA IPQ4019 WiSoC from FDT
 ea28dfb iwinfo: export ht and vht operation in scan results
 4e22953 iwinfo: export center_chan info for local wifi
 74d13fb cli: account for additional digit for frequencies above 10GHz
 8bfd8d8 iwinfo: add support for GCMP cipher

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agorealtek: fix build issues
Birger Koblitz [Tue, 5 Jan 2021 19:40:52 +0000 (20:40 +0100)]
realtek: fix build issues

This fixes the build problems for the REALTEK target by adding a proper
configuration option for the phy module.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
3 years agotools/fakeroot: update to 1.25.3
Syrone Wong [Fri, 1 Jan 2021 13:50:43 +0000 (21:50 +0800)]
tools/fakeroot: update to 1.25.3

use PKG_FIXUP:=autoreconf to generate configure
200-hide-dlsym-error.patch deleted due to fixed upstream in another way
other patches refreshed to reflect latest changes

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
3 years agoipq806x: fix LED names of TP-Link Talon AD2700
Daniel Golle [Tue, 5 Jan 2021 16:24:42 +0000 (16:24 +0000)]
ipq806x: fix LED names of TP-Link Talon AD2700

While the underscore in the name of the USB LEDs was removed from DTS,
/etc/board.d/01_leds also has to reflect that change.

Fixes: 28fd279e5d ("ipq806x: some corrections for TP-Link Talon AD7200")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agoramips: add support for Ubiquiti UniFi 6 Lite
David Bauer [Sat, 12 Dec 2020 13:34:00 +0000 (14:34 +0100)]
ramips: add support for Ubiquiti UniFi 6 Lite

Hardware
--------
MediaTek MT7621AT
256M DDR3
32M SPI-NOR
MediaTek MT7603 2T2R 802.11n 2.4GHz
MediaTek MT7915 2T2R 802.11ax 5GHz

Not Working
-----------
 - Bluetooth (connected to UART3)

UART
----

UART is located in the lower left corner of the board. Pinout is

0 - 3V3 (don't connect)
1 - RX
2 - TX
3 - GND

Console is 115200 8N1.

Boot
----

1. Connect to the serial console and connect power.

2. Double-press ESC when prompted

3. Set the fdt address

   $ fdt addr $(fdtcontroladdr)

4. Remove the signature node from the control FDT

   $ fdt rm /signature

5. Transfer and boot the OpenWrt initramfs image to the device.
   Make sure to name the file C0A80114.img and have it reachable at
   192.168.1.1/24

   $ tftpboot; bootm

Installation
------------

1. Connect to the booted device at 192.168.1.20 using username/password
   "ubnt".

2. Update the bootloader environment.

   $ fw_setenv devmode TRUE
   $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr);
     fdt rm /signature; bootubnt"
   $ fw_setenv bootcmd "run boot_openwrt"

3. Transfer the OpenWrt sysupgrade image to the device using SCP.

4. Check the mtd partition number for bs / kernel0 / kernel1

   $ cat /proc/mtd

5. Set the bootselect flag to boot from kernel0

   $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4

6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1

   $ dd if=openwrt.bin of=/dev/mtdblock6
   $ dd if=openwrt.bin of=/dev/mtdblock7

7. Reboot the device. It should boot into OpenWrt.

Below are the original installation instructions prior to the discovery
of "devmode=TRUE". They are not required for installation and are
documentation only.

The bootloader employs signature verification on the FIT image
configurations. This way, booting unauthorized image without patching
the bootloader is not possible. Manually configuring the bootcmd in the
U-Boot envronment won't work, as this is restored to the default value
if modified.

The bootloader is made up of three different parts.

1. The SPL performing early board initialization and providing a XModem
   recovery in case the PBL is missing

2. The PBL being the primary U-Boot application and containing the
   control FDT. It is LZMA packed with a uImage header.

3. A Ubiquiti standalone U-Boot application providing the main boot
   routine as well as their recovery mechanism.

In a perfect world, we would only replace the PBL, as the SPL does not
perform checks on the PBLs integrity. However, as the PBL is in the same
eraseblock as the SPL, we need to at least rewrite both.

The bootloader will only verify integrity in case it has a "signature"
node in it's control device-tree. Renaming the signature node to
something else will prevent this from happening.

Warning: These instructions are based on the firmware intially
shipped with the device and potentially brick your device in a way it
can only be recovered using a SPI flasher.

Only (!) proceed if you understand this!

1. Extract the bootloader from the U-Boot partition using the OpenWrt
   initramfs image.

2. Split the bootloader into it's 3 components:

   $ dd if=bootloader.bin of=spl.bin bs=1 skip=0 count=45056
   $ dd if=bootloader.bin of=pbl.uimage bs=1 skip=45056 count=143360
   $ dd if=bootloader.bin of=ubnt.uimage bs=1 skip=188416

3. Strip the uImage header from the PBL

   $ dd if=pbl.uimage of=pbl.lzma bs=64 skip=1

4. Decompress the PBL

   $ lzma -d pbl.lzma --single-stream

   The decompressed PBL sha256sum should be
   d8b406c65240d260cf15be5f97f40c1d6d1b6e61ec3abed37bb841c90fcc1235

5. Open the decompressed PBL using your favorite hexeditor. Locate the
   control FDT at offset 0x4CED0 (0xD00DFEED). At offset 0x4D5BC, the
   label for the signature node is located. Rename the "signature"
   string at this offset to "signaturr".

   The patched PBL sha256sum should be
   d028e374cdb40ba44b6e3cef2e4e8a8c16a3b85eb15d9544d24fdd10eed64c97

6. Compress the patched PBL

   $ lzma -z pbl --lzma1=dict=67108864

   The resulting pbl.lzma file should have the sha256sum
   7ae6118928fa0d0b3fe4ff81abd80ecfd9ba2944cb0f0a462b6ae65913088b42

7. Create the PBL uimage

   $ SOURCE_DATE_EPOCH=1607909492 mkimage -A mips -O u-boot -C lzma
     -n "U-Boot 2018.03 [UniFi,v1.1.40.71]" -a 84000000 -e 84000000
     -T firmware -d pbl.lzma patched_pbl.uimage

   The resulting patched_pbl.uimage should have the sha256sum
   b90d7fa2dcc6814180d3943530d8d6b0d6a03636113c94e99af34f196d3cf2ce

8. Reassemble the complete bootloader

   $ dd if=patched_pbl.uimage of=aligned_pbl.uimage bs=143360 count=1
     conv=sync
   $ cat spl.bin > patched_uboot.bin
   $ cat aligned_pbl.uimage >> patched_uboot.bin
   $ cat ubnt.uimage >> patched_uboot.bin

   The resulting patched_uboot.bin should have the sha256sum
   3e1186f33b88a525687285c2a8b22e8786787b31d4648b8eee66c672222aa76b

9. Transfer your patched bootloader to the device. Also install the
   kmod-mtd-rw package using opkg and load it.

   $ insmod mtd-rw.ko i_want_a_brick=1

   Write the patched bootloader to mtd0

   $ mtd write patched_uboot.bin u-boot

10. Erase the kernel1 partition, as the bootloader might otherwise
    decide to boot from there.

    $ mtd erase kernel1

11. Transfer the OpenWrt sysupgrade image to the device and install
    using sysupgrade.

FIT configurations
------------------

In the future, the MT7621 UniFi6 family can be supported by a single
OpenWrt image.

config@1: U6 Lite
config@2: U6 IW
config@3: U6 Mesh
config@4: U6 Extender
config@5: U6 LR-EA (Early Access - GA is MT7622)

Signed-off-by: David Bauer <mail@david-bauer.net>
3 years agoipq806x: some corrections for TP-Link Talon AD7200
Daniel Golle [Tue, 5 Jan 2021 12:55:34 +0000 (12:55 +0000)]
ipq806x: some corrections for TP-Link Talon AD7200

Address most comments made by Adrian Schmutzler on the mailing list.
The device name is kept as 'TP-Link Talon AD7200' as that seems to be
the marketing name TP-Link chose for that device, it also matches the
naming scheme for other TP-Link devices (e.g. 'TP-Link Archer C7').

Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobuild: drop clang wrapper
Kevin Darbyshire-Bryant [Sat, 28 Nov 2020 17:38:54 +0000 (17:38 +0000)]
build: drop clang wrapper

clang's gcc emulation does the right thing with -print-file-name now,
drop the wrapper

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
3 years agoipq806x: add support for TP-Link Talon AD7200
Gary Cooper [Mon, 4 Jan 2021 17:27:50 +0000 (20:27 +0300)]
ipq806x: add support for TP-Link Talon AD7200

Device hardware: https://deviwiki.com/wiki/TP-LINK_AD7200_(Talon)

The Talon AD7200 is basically an Archer C2600 with a third PCIe lane
and an 802.11ad radio. It looks like the Archers C2600/5400 but the
housing is slightly larger.

Specifications
--------------

  - IPQ8064 dual-core 1400MHz
  - QCA9988 2.4GHz WiFi
  - QCA9990 5GHz WiFi
  - QCA9500 60GHz WiFi
  - 32MB SPI Flash
  - 512MiB RAM
  - 5 GBit Ports (QCA8337)

Installation
------------

Installation is possible from the OEM web interface.
Sysupgrade is possible.
TFTP recovery is possible.
  - Image: AD7200_1.0_tp_recovery.bin

Notes
  - This will be the first 802.11ad device supported by mainline.

Signed-off-by: Gary Cooper <gaco@bitmessage.de>
3 years agomac80211: Add wil6210 driver
Robert Marko [Wed, 18 Sep 2019 17:58:49 +0000 (19:58 +0200)]
mac80211: Add wil6210 driver

This patch adds wil6210 driver for Wilocity/QCA based 802.11ad
PCI cards.

Driver uses cfg80211 and nl80211 but not mac80211.
Integration for UCI and LuCI will come in other patches.

Signed-off-by: Robert Marko <robimarko@gmail.com>
3 years agolinux-firmware: Add wil6210 firmware
Robert Marko [Wed, 18 Sep 2019 17:54:56 +0000 (19:54 +0200)]
linux-firmware: Add wil6210 firmware

This patch adds wil6210 firmware and board files.
Firmware version is not up to date but is only freely redistributable one I found.
Board file is a generic one so most devices and especially those for long distance
PtP links will require so in a ipq-wifi like way.

Signed-off-by: Robert Marko <robimarko@gmail.com>
3 years agomac80211: add 802.11ad-support
Gary Cooper [Mon, 4 Jan 2021 17:27:49 +0000 (20:27 +0300)]
mac80211: add 802.11ad-support

This adds logic to properly populate defaults in /etc/config/wireless.

Signed-off-by: Gary Cooper <gaco@bitmessage.de>
3 years agohostapd: wpa_supplicant: Enable proper GCMP cipher support
Robert Marko [Sun, 17 Mar 2019 20:01:17 +0000 (21:01 +0100)]
hostapd: wpa_supplicant: Enable proper GCMP cipher support

This patch enables hostapd.sh to properly configure wpa_supplicant
for when GCMP is used as cipher in station mode.
Without this wpa_supplicant will be unable to connect to AP.
This is needed for wil6210 as it does not support CCMP.

Signed-off-by: Robert Marko <robimarko@gmail.com>
3 years agobase-files: wifi: add support for 802.11ad
Daniel Golle [Mon, 4 Jan 2021 18:53:40 +0000 (18:53 +0000)]
base-files: wifi: add support for 802.11ad

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agonetifd: update to git HEAD
Daniel Golle [Tue, 5 Jan 2021 02:15:33 +0000 (02:15 +0000)]
netifd: update to git HEAD

 0c83439 netifd: wireless: default to GCMP WPA cipher on 802.11ad

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agofstools: fix 'firstboot' on unmounted UBIFS overlay
Daniel Golle [Mon, 4 Jan 2021 21:01:05 +0000 (21:01 +0000)]
fstools: fix 'firstboot' on unmounted UBIFS overlay

The usual OpenWrt-way of writing the JFFS2-marker in order to have
a filesystem erased at the next boot fails on UBIFS volumes due to
UBI being a different beast when it comes to writing.
As truncating a UBIFS volume only takes a few milliseconds and has the
desired effect of wiping-out all content of that volume, just do that
instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobuild: replace which with Bash command built-in
Petr Štetiar [Tue, 22 Dec 2020 09:33:02 +0000 (10:33 +0100)]
build: replace which with Bash command built-in

`which` utility is not shipped by default for example on recent Arch
Linux and then any steps relying on its presence fails, like for example
following Python3 prereq build check:

 $ python3 --version
 Python 3.9.1

 $ make
 /bin/sh: line 1: which: command not found
 /bin/sh: line 1: which: command not found
 /bin/sh: line 1: which: command not found
 ...
 Checking 'python3'... failed.
 ...

Fix this by switching to Bash builtin `command` which should provide
same functionality.

Fixes: FS#3525
Signed-off-by: Petr Štetiar <ynezz@true.cz>
3 years agoodhcpd: bump to latest version
Nick Hainke [Sun, 3 Jan 2021 21:26:05 +0000 (22:26 +0100)]
odhcpd: bump to latest version

3bda900 odhcpd: add option for setting preferred lifetime

Signed-off-by: Nick Hainke <vincent@systemli.org>
3 years agoath79: keep DTSI files for D-Link SoC-specific
Adrian Schmutzler [Sun, 3 Jan 2021 23:56:57 +0000 (00:56 +0100)]
ath79: keep DTSI files for D-Link SoC-specific

It is good practice to define device tree files based on specific
SoCs. Thus, let's not start to create files that are used across
different architectures.

Duplicate the DTSI file for D-Link DAP-2xxx in order to have one
for qca953x and one for qca955x, respectively.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoath79: Fix 02_network setup for D-Link DAP-2660 A1
Sebastian Schaper [Sun, 3 Jan 2021 20:39:10 +0000 (21:39 +0100)]
ath79: Fix 02_network setup for D-Link DAP-2660 A1

The device is a one-port, but was set up as two-port by the
default case in 02_network. Fix it.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoath79: add support for D-Link DAP-3320 A1
Sebastian Schaper [Mon, 30 Nov 2020 19:09:29 +0000 (20:09 +0100)]
ath79: add support for D-Link DAP-3320 A1

Specifications:
 * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
 * 10/100 Ethernet Port, 802.11af PoE
 * IP55 pole-mountable outdoor case

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
3 years agoath79: add support for D-Link DAP-2680 A1
Sebastian Schaper [Wed, 2 Dec 2020 20:31:19 +0000 (21:31 +0100)]
ath79: add support for D-Link DAP-2680 A1

Specifications:
 * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R
 * QCA9984, 802.11ac Wave 2 3T3R
 * Gigabit LAN Port (AR8035), 802.11at PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
3 years agoath79: add support for D-Link DAP-2230 A1
Sebastian Schaper [Tue, 16 Jun 2020 22:11:37 +0000 (00:11 +0200)]
ath79: add support for D-Link DAP-2230 A1

Specifications:
 * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R
 * 10/100 Ethernet Port, 802.11af PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
3 years agox86/efi: add FAT32 esp mounting support
Kagurazaka Kotori [Tue, 8 Sep 2020 08:00:02 +0000 (16:00 +0800)]
x86/efi: add FAT32 esp mounting support

Adds a new function get_magic_fat32() in base-files to read FAT32 magic.
Now FAT32 EFI system partition can be handled in the same way as FAT12/FAT16.

Signed-off-by: Kagurazaka Kotori <kagurazakakotori@gmail.com>
[replace '-o' with '] || [' to satisfy shellsheck]
Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agousbutils: remove
Rosen Penev [Wed, 30 Dec 2020 03:35:11 +0000 (19:35 -0800)]
usbutils: remove

This package is not needed in base. It will be imported in the packages
feed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Paul Spooren <mail@aparcar.org>
3 years agousbreset: remove redundant package
Paul Spooren [Thu, 31 Dec 2020 04:35:30 +0000 (18:35 -1000)]
usbreset: remove redundant package

The package `usbutils` already offers an USB reset function, this
package is therefore not really required standalone.

CC: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agohostapd: add support for custom per-BSS options
Florian Beverborg [Sat, 7 Nov 2020 14:44:05 +0000 (15:44 +0100)]
hostapd: add support for custom per-BSS options

This adds an option "hostapd_bss_options" that does the same as
"hostapd_options" but on a per-BSS level, instead of a per-device level.

This can be used, for example, to configure different per-devce sae_passwords
per BSS or to augment some of the existing per-BSS options.

Signed-off-by: Florian Beverborg <flo@beverb.org>
[remove whitespace errors, bump release]
Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agoipq806x: consolidate DTS files directory
Sungbo Eo [Sun, 3 Jan 2021 14:34:31 +0000 (23:34 +0900)]
ipq806x: consolidate DTS files directory

Commit 29ca10e537ee ("ipq806x: remove support for kernel 4.19") moved
DTS files to "files" directory, but after that a new DTS file was added
to the former "files-5.4" directory. Move it to the new directory.

Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
3 years agomediatek: remove unnecessary execute permission bit
Sungbo Eo [Sun, 3 Jan 2021 13:59:43 +0000 (22:59 +0900)]
mediatek: remove unnecessary execute permission bit

Kernel config does not need to be executable. 644 is enough.

Fixes: 25d9df670b85 ("mediatek: add v5.4 support")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[split by targets]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoipq40xx: remove unnecessary execute permission bit
Sungbo Eo [Sun, 3 Jan 2021 13:59:43 +0000 (22:59 +0900)]
ipq40xx: remove unnecessary execute permission bit

DTS files do not need to be executable. 644 is enough.

Fixes: 0fbdb51f7643 ("ipq40xx: add Edgecore OAP-100 support")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[split by targets]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agoath79: fix ethernet-phy label for dlink,dap-2660-a1
Adrian Schmutzler [Sun, 3 Jan 2021 12:55:50 +0000 (13:55 +0100)]
ath79: fix ethernet-phy label for dlink,dap-2660-a1

The phy label/node name should correspond to the reg property.

While at it, use more common decimal notation for reg property itself.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 years agomac80211: replace legacy minstrel with minstrel_ht, improve rate selection
Felix Fietkau [Tue, 29 Dec 2020 17:23:29 +0000 (18:23 +0100)]
mac80211: replace legacy minstrel with minstrel_ht, improve rate selection

Legacy minstrel is essentially unmaintained and was showing poor performance
Replace it with minstrel_ht and improve rate selection and sampling behavior

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agowolfssl: enable HAVE_SECRET_CALLBACK
Felix Fietkau [Sat, 2 Jan 2021 13:36:03 +0000 (14:36 +0100)]
wolfssl: enable HAVE_SECRET_CALLBACK

Fixes wpad-wolfssl build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoscripts/qemustart: use squashfs instead of ext4
Paul Spooren [Tue, 29 Dec 2020 23:11:04 +0000 (13:11 -1000)]
scripts/qemustart: use squashfs instead of ext4

The qemustart script currently picks the ext4 filesystem rather than
squashfs, while the latter is default for nearly all OpenWrt targets.

Change the default behaviour of qemustart to be in line with the rest.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 years agobuild: use CCACHE_DIR for ccache directory
Sven Wegener [Fri, 1 Jan 2021 10:43:50 +0000 (11:43 +0100)]
build: use CCACHE_DIR for ccache directory

It is being set by rules.mk with the same expression.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
3 years agowolfssl: Fix hostapd build with wolfssl 4.6.0
Hauke Mehrtens [Fri, 1 Jan 2021 21:04:18 +0000 (22:04 +0100)]
wolfssl: Fix hostapd build with wolfssl 4.6.0

This fixes the following build problem in hostapd:
mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_add':
<artificial>:(.text.crypto_ec_point_add+0x170): undefined reference to `ecc_projective_add_point'
mipsel-openwrt-linux-musl/bin/ld: <artificial>:(.text.crypto_ec_point_add+0x18c): undefined reference to `ecc_map'
mipsel-openwrt-linux-musl/bin/ld: /builder/shared-workdir/build/tmp/ccN4Wwer.ltrans7.ltrans.o: in function `crypto_ec_point_to_bin':
<artificial>:(.text.crypto_ec_point_to_bin+0x40): undefined reference to `ecc_map'

Fixes: ba40da9045f7 ("wolfssl: Update to v4.6.0-stable")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agoipq806x: reenable CONFIG_CMDLINE_OVERRIDE and ASRock G10
Pawel Dembicki [Thu, 31 Dec 2020 15:53:24 +0000 (16:53 +0100)]
ipq806x: reenable CONFIG_CMDLINE_OVERRIDE and ASRock G10

This reverts commit 57e4cc8261ca6f0b32e4da6922a8f52ef82c4dc6.

Cmdline override patch was fixed. It's time for reenable
Asrock G10 support.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Tested-by: Hannu Nyman <hannu.nyman@iki.fi> (run-tested for R7800)