From 0fbdb51f7643db5fa4423333a68f34c6952dba24 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 7 Sep 2020 13:08:41 +0200 Subject: [PATCH] ipq40xx: add Edgecore OAP-100 support flashing the unit * first update to latest edcore FW as per the PDF instructions * boot the initramfs - tftpboot 0x88000000 openwrt-ipq40xx-generic-edgecore_oap100-initramfs-fit-uImage.itb; bootm * inside the initramfs call the following commiands - ubiattach -p /dev/mtd0 - ubirmvol /dev/ubi0 -n0 - ubirmvol /dev/ubi0 -n1 - ubirmvol /dev/ubi0 -n2 * scp the sysupgrade image to the board and call - sysupgrade -n openwrt-ipq40xx-generic-edgecore_oap100-squashfs-nand-sysupgrade.bin Signed-off-by: John Crispin --- package/firmware/ipq-wifi/Makefile | 2 + .../ipq-wifi/board-edgecore_oap100.qca4019 | Bin 0 -> 24324 bytes .../ipq40xx/base-files/etc/board.d/01_leds | 4 + .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 + .../base-files/lib/upgrade/platform.sh | 1 + .../arch/arm/boot/dts/qcom-ipq4019-oap100.dts | 339 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 13 + .../100-GPIO-add-named-gpio-exports.patch | 165 +++++++++ .../901-arm-boot-add-dts-files.patch | 3 +- 10 files changed, 529 insertions(+), 1 deletion(-) create mode 100644 package/firmware/ipq-wifi/board-edgecore_oap100.qca4019 create mode 100755 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts create mode 100644 target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 963cf2d7c4..387b23d556 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -33,6 +33,7 @@ ALLWIFIBOARDS:= \ dlink_dap2610 \ edgecore_ecw5211 \ edgecore_ecw5410 \ + edgecore_oap100 \ engenius_eap2200 \ engenius_emd1 \ engenius_emr3500 \ @@ -109,6 +110,7 @@ $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) $(eval $(call generate-ipq-wifi-package,edgecore_ecw5211,Edgecore ECW5211)) $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) +$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1)) $(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500)) diff --git a/package/firmware/ipq-wifi/board-edgecore_oap100.qca4019 b/package/firmware/ipq-wifi/board-edgecore_oap100.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..9f1b5c93b5ebc7561987aa86f138e86c00d954b6 GIT binary patch literal 24324 zcmeHPdr(tX8b5>p>f*u;0TJ*LLU;rrK%g2Vypi%qfubS-76AoGYUE{j7`kA`2Ze|T z)`B5|mO*(mMPw{KAQo$DXO!7L_K%(YqwUP@_K$UkcGa17W_NYZy~%|TLP;P@dE75K z_k8EO-#OtK`8;TX)zh`Kq8R5MC-QEvPtx6}dtFRRtBIg5xJ5_8vJ}bhxylh>;eP9vl<|+p~ae zFkpL(!0`hX7QnKe7Mh8*?bib=Kt2FlY_JjlbO7u_aE*#@^*3xb6Ke{9kdTm9FJ4&i z>DJ(vzg>tTk|k_liSkgtUaO`j@CFLpr!8r-UVU$(YzIy;Vn9qh71(QE#2ze0LZ8i} zmLBnJBT(Bi(=P*PUeL(Ub)nOAOHp(i8yhPtD@z>#U>qB%k>UvbbdwV->n0mVJ#iQp-Y9fo+nMl}u=oc^MDEKm6MVtROZGCi2gOzI}$oP>yl%vT

Lr@;^)g^v2cU0H)0|&IF;nZdjd(iO-*jid5$vA7dbKKpmzX5LeWd<0^RHaE#8#|`W4?|bGPh6<&bXjTBhjyv=~$keO{Jo zTMy@?kwsE&1?zFeL zZzE~6-Q3+s6m1hBAfvGD`p6^QEph2@T0Xyz&4ie(j}3eX$)THwz{`1JVgoDXuB9t1 z+PtxTi#D{n90a)~^3i7iz`RD@Gx|(F=LGos`@=ik40LsBFgQOyUvC)SD%D_k+W1zb zwz_8H{Ai*90vvu|HvkX}yde|F9VV7N08E&$yp5{1p=-vQ>dFhhH?!GG2k&M%drWv z;FoL9=r;@HKHgre-!f@d?lfz4n$=DKFQ0lp3@pfwUJq4*l8AhwZM1;y7t1>8nr1=Ms97p$@V(OomsV0{H@%$jj( zW?pg2<*R+FJL<0&($^O%v!kKErXy~s8^=vR2l21t5dkXT2n6vU^mQo0NBJDSAk=Kv z*R#EvqB(J$5R{g{O+Zp@~j);&+b7*UBZ1sl5AOqj>inUKSRRbYIho zv%npDfF;JeceH81;ejkBJDhh9NoWLKx;b08V!Zp?y8U4Kuk!BoooC96^X^e(#u+La z{=1E}r4@CC0T00F8{_Esqcc2tgS>m)j8{2$P!&%2*~uHoHh?$1cq@b+K5_-WewTzo^k`@ldB2TRy`19s<}iLX2? zU-RFI--u_zl>)P9hNc$DyVqQ0KA64O+<>Yv_fT{h_Zl6COoP^nZ?Uc0kCP8dhDDmx?olJk_YOM=Tbm^8D4GE8AoeVJweS5I< z@;b3l$XBW53h{}=y}r(P5ATU{G$E-cVMtSVRSM-PxkS8IeM@y+*#s-6s_x4>#Z`%k zzOL#qJ8ahaoAIXXNEFq3V{hTP#V8;RR0JS6!FaiVyN! zG!@w1*cjTBC*{SmRJil1yhfZZ41|Gn%A~>+9((GJ>WaKVoR-MKDts}?hA7=ucPcC8 zd9wJaF}Sl*mMcz%VP1n+M)Od(w@XWtXU|_iVljs)Tx@{$LMe3R0 z6OISB?!DVz*tVyh@t$MOmv?0YX$qfHP7>8E>Gkj?W)v-0WYwz1aR>|M1bCgf`Ym zdU40V@vBiy-Zk`s8=a!YNU7gZhm^jXrB}jFdsfi%uJjjl#x#3W((*3#iLUU^dR98* zo^Lt$eyEt4LyI06sO(BT?_2F$v|%R>IdBqzb%4NfpTYs3g*7V%@EC5)=h@>=;qdZe z!8d#Y2gB3DgXxh8R?Sm5=5yi++WjW8t=Z4-gP`4SHd`MC;3rKa0tOM7N4tNi=VmPF z!`yy)VQjSGqP%tw!27Yaf@@Ki?tW9x|aY&V4U@>Lkk+Cdh(` zhCKW&z3c`oB~Q-gIG3J6)pF^9MLgu~`-QQ}SN}N42=x)bc=1%oi_hw~`FJIG@%sIl zySxzJp0NLxoO`Tql6Q} +#include +#include + +/ { + model = "EdgeCore OAP-100"; + compatible = "edgecore,oap100"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + chosen { + bootargs-append = " root=/dev/ubiblock0_1"; + }; + + soc { + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + usb2_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */ + switch_initvlas = <0x0007c 0x54>; /* port0 status */ + switch_lan_bmp = <0x10>; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + key { + compatible = "gpio-keys"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system: led_system { + label = "oap100:green:system"; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; + }; + + led_2g { + label = "oap100:blue:wlan2g"; + gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; + + led_5g { + label = "oap100:blue:wlan5g"; + gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb-power"; + gpio-export,output = <1>; + gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; + }; + + poe { + gpio-export,name = "poe-power"; + gpio-export,output = <0>; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "gd25q256"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition7@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "rootfs"; + reg = <0x00000000 0x4000000>; + }; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Edgecore OAP100"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Edgecore OAP100"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 127af99ce5..0f03e1f429 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -356,6 +356,19 @@ define Device/edgecore_ecw5211 endef TARGET_DEVICES += edgecore_ecw5211 +define Device/edgecore_oap100 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_TITLE := Edgecore OAP100 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGES := nand-sysupgrade.bin + DEVICE_DTS_CONFIG := config@ap.dk07.1-c1 + DEVICE_DTS := qcom-ipq4019-oap100 + DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi +endef +TARGET_DEVICES += edgecore_oap100 + define Device/engenius_eap1300 $(call Device/FitImage) DEVICE_VENDOR := EnGenius diff --git a/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch b/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..61ed9ea784 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,165 @@ +From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 24/53] GPIO: add named gpio exports + +Signed-off-by: John Crispin +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib-sysfs.c | 10 +++++- + include/asm-generic/gpio.h | 6 ++++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 91 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -23,6 +23,8 @@ + #include + #include + #include ++#include ++#include + + #include "gpiolib.h" + +@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ if (!gpio_is_valid(gpio)) ++ return gpio; ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++ .probe = of_gpio_export_probe, ++}; ++ ++module_platform_driver(gpio_export_driver); +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -553,7 +553,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -636,6 +638,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_ + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch index ea45606c27..e2dc45a39f 100644 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch @@ -12,7 +12,7 @@ Index: linux-5.4.63/arch/arm/boot/dts/Makefile =================================================================== --- linux-5.4.63.orig/arch/arm/boot/dts/Makefile +++ linux-5.4.63/arch/arm/boot/dts/Makefile -@@ -837,11 +837,51 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -837,11 +837,52 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -32,6 +32,7 @@ Index: linux-5.4.63/arch/arm/boot/dts/Makefile + qcom-ipq4018-jalapeno.dtb \ + qcom-ipq4018-meshpoint-one.dtb \ + qcom-ipq4018-nbg6617.dtb \ ++ qcom-ipq4019-oap100.dtb \ + qcom-ipq4018-rt-ac58u.dtb \ + qcom-ipq4018-wre6606.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ -- 2.30.2