From 764721f26279a057bd79173870d2ce63c9f37055 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 21 Nov 2015 21:25:20 +0000 Subject: [PATCH] lantiq: tweak DWC2 default parameters MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This patch improves the default configuration of DWC2 on lantiq SoCs somewhat: * Set maximum packet count to largest allowed value by the DWC2 (511) * Use 16-bit DMA bursts * Divide fifo buffers more evenly Default fifo buffer sizes from original ltq-hcd driver seem really irrational. For example according to DWC2 data book rxfifo size of 240 will not fit even a single full length USB packet. On the other hand non-periodic tx fifo size of 240 is more than enough to fit one complete packet. Change the sizes around to improve the situation and to fix some issues especially with isochronous USB transfers. Signed-off-by: Antti Seppälä SVN-Revision: 47563 --- .../patches-3.18/0041-USB-DWC2-add-ltq-params.patch | 10 +++++----- .../patches-4.1/0041-USB-DWC2-add-ltq-params.patch | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch index a0af1236f9..2d9cb0f63f 100644 --- a/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch +++ b/target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch @@ -12,11 +12,11 @@ + .speed = -1, + .enable_dynamic_fifo = -1, + .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 240, /* 240 DWORDs */ -+ .host_nperio_tx_fifo_size = 240, /* 240 DWORDs */ -+ .host_perio_tx_fifo_size = 32, /* 32 DWORDs */ ++ .host_rx_fifo_size = 288, /* 288 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ ++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ + .max_transfer_size = -1, -+ .max_packet_count = -1, ++ .max_packet_count = 511, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, @@ -28,7 +28,7 @@ + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, -+ .ahbcfg = -1, ++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = -1, +}; + diff --git a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch index c55f5b6821..0b5d09bed2 100644 --- a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch +++ b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch @@ -12,11 +12,11 @@ + .speed = -1, + .enable_dynamic_fifo = -1, + .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 240, /* 240 DWORDs */ -+ .host_nperio_tx_fifo_size = 240, /* 240 DWORDs */ -+ .host_perio_tx_fifo_size = 32, /* 32 DWORDs */ ++ .host_rx_fifo_size = 288, /* 288 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ ++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ + .max_transfer_size = -1, -+ .max_packet_count = -1, ++ .max_packet_count = 511, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, @@ -28,7 +28,7 @@ + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, -+ .ahbcfg = -1, ++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = -1, +}; + -- 2.30.2