+++ /dev/null
-# Bird6-OpenWRT Library - Functions used in /etc/init.d/bird6 script.
-#
-#
-# Copyright (C) 2014-2017 - Eloi Carbo
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-
-# Function: writeToConfig $1
-# $1 string.
-# Allows to write in the $BIRD_CONFIG file, the string $1. This function does not check the $1 string.
-# Example: writeToConfig "value: $N"
-writeToConfig() {
- echo "$1" >> ${BIRD_CONFIG}
-}
-
-
-# Function: write $1 $2
-# $1 string. $2 string.
-# This function checks if $2 is empty. If not, it writes the string $1 in the $BIRD_CONFIG file.
-# Use write function to check if $1, value found inside $2, is not empty and can be written in the configuration file.
-# Example: N=""; write "value: $N" $N;
-write() {
- [ -n "$2" ] && writeToConfig "$1"
-}
-
-
-#Function: write_bool $1 $2
-# $1 string; $2 boolean
-# This function checks if $2 is true or false and write the $1 string into $BIRD_CONFIG file.
-# The function writes a # before the $2 string if its false.
-# Example: local N=0; write_bool $N
-write_bool() {
- [ "$2" == 0 ] && writeToConfig "# $1;" || writeToConfig " $1;"
-}
-
-
-# Function: get $1 $2
-# $1 string. $2 string
-# This function uses the external UCI function "config_get $result $section $option" to obtain a string value from UCI config file.
-# To use this function, use the same name of the UCI option for the variable.
-# Example: UCI (option id 'abcd'); local id; get id $section
-get() {
- config_get $1 $2 $1
-}
-
-
-# Function: get_bool $1 $2
-# $1 boolean. $2 string
-# This function uses the external UCI function "config_get_bool $result $section $option" to obtain a boolean value from UCI config file.
-# To use this function, use the same name of the UCI option for the variable $1.
-# Example: UCI (option use_ipv6 '1'); local use_ipv6; get use_ipv6 $section
-get_bool() {
- config_get_bool $1 $2 $1
-}
-
-
-# Function: multipath_list $1
-# $1 string
-# This function writes the $1 string in the multipath routes.
-multipath_list() {
- write " via $1" $1
-}
-
-
-# Function: prepare_tables $1
-# $1 string
-# This function gets each "table" section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI table section
-prepare_tables() {
- local section="$1"; local name
-
- get name ${section}
-
- write "table ${name};" ${name}
-}
-
-
-# Function: prepare_global $1
-# $1 string
-# This function gets each "global" section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI global section. prepare_global is the first configuration set in the bird6.conf and removes the old file.
-prepare_global () {
- local section="$1"
- local log_file; local log; local debug; local router_id; local table
- local listen_bgp_addr; local listen_bgp_port; local listen_bgp_dual
-
- # Remove old configuration file
- rm -f "${BIRD_CONFIG}"
-
- get log_file ${section}
- get log ${section}
- get debug ${section}
- get router_id ${section}
- get table ${section}
- get listen_bgp_addr ${section}
- get listen_bgp_port ${section}
- get listen_bgp_dual ${section}
-
- # First line of the NEW configuration file
- echo "#Bird6 configuration using UCI:" > ${BIRD_CONFIG}
- writeToConfig " "
- #TODO: Set Syslog as receiver if empty
- # LOGF="${log_file:-syslog]}"
- #TODO: If $log/$debug are empty, set to off
- if [ -n "${log_file}" -a -n "${log}" ]; then
- firstEntry="${log:0:3}"
- if [ "${firstEntry}" = "all" -o "${firstEntry}" = "off" ]; then
- writeToConfig 'log "'${log_file}'" '${firstEntry}';'
- else
- logEntries=$(echo ${log} | tr " " ",")
- writeToConfig "log \"${log_file}\" { ${logEntries} };"
- fi
- fi
-
- if [ -n "${debug}" ]; then
- firstEntry="${debug:0:3}"
- if [ "${firstEntry}" = "all" -o "${firstEntry}" = "off" ]; then
- writeToConfig "debug protocols ${firstEntry};"
- else
- debugEntries=$(echo ${debug} | tr " " ",")
- writeToConfig "debug protocols { ${debugEntries} };"
- fi
- fi
- writeToConfig " "
- writeToConfig "#Router ID"
- write "router id ${router_id};" ${router_id}
- writeToConfig " "
- writeToConfig "#Secondary tables"
- config_foreach prepare_tables 'table'
- if [ -n "${listen_bgp_dual}" -o "${listen_bgp_dual}" = "0" ]; then
- writeToConfig "listen bgp ${listen_bgp_addr} ${listen_bgp_port} v6only;"
- else
- writeToConfig "listen bgp ${listen_bgp_addr} ${listen_bgp_port} dual;"
- fi
- writeToConfig " "
-}
-
-
-# Function: prepare_routes $1
-# $1 string
-# This function gets each "route" section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI route section. Each type of route has its own treatment.
-prepare_routes() {
- local instance; local prefix; local via; local type
- local section="$1"
- local protoInstance="$2"
-
- get instance ${section}
- get type ${section}
- get prefix ${section}
-
- if [ "${instance}" = "${protoInstance}" ]; then
- case "${type}" in
- "router")
- get via ${section}
- [ -n "${prefix}" -a -n "${via}" ] && writeToConfig " route ${prefix} via ${via};"
- ;;
- "special")
- get attribute ${section}
- [ -n "${prefix}" -a -n "${attribute}" ] && writeToConfig " route ${prefix} ${attribute};"
- ;;
- "iface")
- get iface ${section}
- [ -n "${prefix}" -a -n "${iface}" ] && writeToConfig ' route '${prefix}' via "'${iface}'";'
- ;;
- "multipath")
- write " route ${prefix} multipath" ${prefix}
- config_list_foreach ${section} l_via multipath_list
- writeToConfig " ;"
- ;;
- esac
- fi
-}
-
-
-# Function: prepare_kernel $1
-# $1 string
-# This function gets each "kernel" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI kernel section.
-prepare_kernel() {
- local section="$1"
- local disabled; local table; local kernel_table; local import; local export
- local scan_time; local persist; local learn
-
- get_bool disabled ${section}
- get table ${section}
- get import ${section}
- get export ${section}
- get scan_time ${section}
- get kernel_table ${section}
- get learn ${section}
- get persist ${section}
-
- write "#${section} configuration:" ${section}
- writeToConfig "protocol kernel ${section} {" ${section}
- write_bool disabled ${disabled}
- write " table ${table};" ${table}
- write " kernel table ${kernel_table};" ${kernel_table}
- write_bool learn ${learn}
- write_bool persist ${persist}
- write " scan time ${scan_time};" ${scan_time}
- write " import ${import};" ${import}
- write " export ${export};" ${export}
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: prepare_static $1
-# $1 string
-# This function gets each "static" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI static section.
-prepare_static() {
- local section="$1"
- local disabled; local table
-
- get disabled ${section}
- get table ${section}
-
- if [ "${disabled}" -eq 0 ]; then
- writeToConfig "#${section} configration:" ${section}
- writeToConfig "protocol static {"
- write " table ${table};" ${table}
- config_foreach prepare_routes 'route' ${section}
- writeToConfig "}"
- writeToConfig " "
- fi
-}
-
-
-# Function: prepare_direct $1
-# $1 string
-# This function gets each "direct" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI direct section.
-prepare_direct() {
- local section="$1"
- local disabled; local interface
-
- get disabled ${section}
- get interface ${section}
-
- write "#${section} configuration:" ${section}
- writeToConfig "protocol direct {"
- write_bool disabled ${disabled}
- write " interface ${interface};" ${interface}
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: prepare_pipe $1
-# $1 string
-# This function gets each "pipe" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI direct section.
-prepare_pipe() {
- local section="$1"
- local disabled; local table; local peer_table; local mode; local import; local export
-
- get disabled ${section}
- get peer_table ${section}
- get mode ${section}
- get table ${section}
- get import ${section}
- get export ${section}
-
- write "#${section} configuration:" ${section}
- writeToConfig "protocol pipe ${section} {" ${section}
- write_bool disabled ${disabled}
- write " table ${table};" ${table}
- write " peer table ${peer_table};" ${peer_table}
- write " mode ${mode};" ${mode}
- write " import ${import};" ${import}
- write " export ${export};" ${export}
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: prepare_device $1
-# $1 string
-# This function gets each "device" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI device section.
-prepare_device() {
- local section="$1"
- local disabled; local scan_time
-
- get disabled ${section}
- get scan_time ${section}
-
- write "#${section} configuration:" ${section}
- writeToConfig "protocol device {"
- write_bool disabled ${disabled}
- write " scan time ${scan_time};" ${scan_time}
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: prepare_bgp_template $1
-# $1 string
-# This function gets each "bgp_template" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI bgp_template section.
-# Careful! Template options will be replaced by "instance" options if there is any match.
-prepare_bgp_template() {
- local section="$1"
- local disabled; local table; local import; local export; local local_address
- local local_as; local neighbor_address; local neighbor_as; local source_address
- local next_hop_self; local next_hop_keep; local rr_client; local rr_cluster_id
- local import_limit; local import_limit_action; local export_limit; local export_limit_action
- local receive_limit; local receive_limit_action; local igp_table
-
- get_bool disabled ${section}
- get_bool next_hop_self ${section}
- get_bool next_hop_keep ${section}
- get table ${section}
- get import ${section}
- get export ${section}
- get local_address ${section}
- get local_as ${section}
- get igp_table ${section}
- get rr_client ${section}
- get rr_cluster_id ${section}
- get import_limit ${section}
- get import_limit_action ${section}
- get export_limit ${section}
- get export_limit_action ${section}
- get receive_limit ${section}
- get receive_limit_action ${section}
- get neighbor_address ${section}
- get neighbor_as ${section}
-
- writeToConfig "#${section} template:"
- writeToConfig "template bgp ${section} {"
- [ -n "${disabled}" ] && write_bool disabled ${disabled}
- write " table ${table};" ${table}
- write " local as ${local_as};" ${local_as}
- write " source address ${local_address};" ${local_address}
- write " import ${import};" ${import}
- write " export ${export};" ${export}
- if [ -n "${next_hop_self}" ]; then
- [ "${next_hop_self}" = "1" ] && writeToConfig " next hop self;" || writeToConfig "# next hop self;"
- fi
- if [ -n "${next_hop_keep}" ]; then
- [ "${next_hop_keep}" = "1" ] && writeToConfig " next hop keep;" || writeToConfig "# next hop keep;"
- fi
- [ -n "${igp_table}" ] && writeToConfig " igp table ${igp_table};"
- [ "${rr_client}" = "1" ] && writeToConfig " rr client;" || writeToConfig "# rr client;"
- write " rr cluster id ${rr_cluster_id};" ${rr_cluster_id}
- if [ -n "${import_limit}" -a "${import_limit}" > "0" ]; then
- [ -z "${import_limit_action}" ] && ${import_limit_action} = "warn"
- writeToConfig " import limit ${import_limit} action ${import_limit_action};"
- fi
- if [ -n "${export_limit}" -a "${export_limit}" > "0" ]; then
- [ -z "${export_limit_action}" ] && ${export_limit_action} = "warn"
- writeToConfig " export limit ${export_limit} action ${export_limit_action};"
- fi
- if [ -n "${receive_limit}" -a "${receive_limit}" > "0" ]; then
- [ -z "${receive_limit_action}" ] && ${receive_limit_action} = "warn"
- writeToConfig " receive limit ${receive_limit} action ${receive_limit_action};"
- fi
- [ -n "${neighbor_address}" -a -n "${neighbor_as}" ] && writeToConfig " neighbor ${neighbor_address} as ${neighbor_as};"
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: prepare_bgp $1
-# $1 string
-# This function gets each "bgp" protocol section in the UCI configuration and sets each option in the bird6.conf file.
-# $1 is set as the ID of the current UCI bgp section.
-# Careful! The options set in bgp instances overlap bgp_template ones.
-prepare_bgp() {
- local section="$1"
- local disabled; local table; local template; local description; local import
- local export; local local_address; local local_as; local neighbor_address
- local neighbor_as; local rr_client; local rr_cluster_id; local import_limit
- local import_limit_action; local export_limit; local export_limit_action
- local receive_limit; local receive_limit_action; local igp_table
-
- get disabled ${section}
- get table ${section}
- get template ${section}
- get description ${section}
- get import ${section}
- get export ${section}
- get local_address ${section}
- get local_as ${section}
- get igp_table ${section}
- get rr_client ${section}
- get rr_cluster_id ${section}
- get import_limit ${section}
- get import_limit_action ${section}
- get export_limit ${section}
- get export_limit_action ${section}
- get receive_limit ${section}
- get receive_limit_action ${section}
- get neighbor_address ${section}
- get neighbor_as ${section}
-
- writeToConfig "#${section} configuration:"
- [ -n "${template}" ] && writeToConfig "protocol bgp ${section} from ${template} {" || writeToConfig "protocol bgp ${section} {"
- [ -n "${disabled}" ] && write_bool disabled ${disabled}
- write " table ${table};" ${table}
- write " local as ${local_as};" ${local_as}
- write " source address ${local_address};" ${local_address}
- write " import ${import};" ${import}
- write " export ${export};" ${export}
- if [ -n "${next_hop_self}" ]; then
- [ "${next_hop_self}" = "1" ] && writeToConfig " next hop self;" || writeToConfig "# next hop self;"
- fi
- if [ -n "${next_hop_keep}" ]; then
- [ "${next_hop_keep}" = "1" ] && writeToConfig " next hop keep;" || writeToConfig "# next hop keep;"
- fi
- [ -n "${igp_table}" ] && writeToConfig " igp table ${igp_table};"
- [ "${rr_client}" = "1" ] && writeToConfig " rr client;" || writeToConfig "# rr client;"
- write " rr cluster id ${rr_cluster_id};" ${rr_cluster_id}
- if [ -n "${import_limit}" -a "${import_limit}" > "0" ]; then
- [ -z "${import_limit_action}" ] && ${import_limit_action} = "warn"
- writeToConfig " import limit ${import_limit} action ${import_limit_action};"
- fi
- if [ -n "${export_limit}" -a "${export_limit}" > "0" ]; then
- [ -z "${export_limit_action}" ] && ${export_limit_action} = "warn"
- writeToConfig " export limit ${export_limit} action ${export_limit_action};"
- fi
- if [ -n "${receive_limit}" -a "${receive_limit}" > "0" ]; then
- [ -z "${receive_limit_action}" ] && ${receive_limit_action} = "warn"
- writeToConfig " receive limit ${receive_limit} action ${receive_limit_action};"
- fi
- [ -n "${neighbor_address}" -a -n "${neighbor_as}" ] && writeToConfig " neighbor ${neighbor_address} as ${neighbor_as};"
- writeToConfig "}"
- writeToConfig " "
-}
-
-
-# Function: gather_filters
-# This function gets all the FILES under /filters folder and adds
-# them into the config as %include elements on top of the file
-# If there are no filters, the section will remain empty.
-gather_filters() {
- writeToConfig "#Filters Section:"
- for filter in $(find /etc/${BIRD}/filters -type f); do
- writeToConfig "include \"${filter}\";"
- done
- writeToConfig "#End of Filters --"
- writeToConfig " "
-}
-
-
-# Function: gather_functions
-# This function gets all the FILES under /functions folder and adds
-# them into the config as %include elements on top of the file
-# If there are no filters, the section will remain empty.
-gather_functions() {
- writeToConfig "#Functions Section:"
- for func in $(find /etc/${BIRD}/functions -type f); do
- writeToConfig "include \"${func}\";"
- done
- writeToConfig "#End of Functions --"
- writeToConfig " "
-}
projects / feed / routing.git / blobdiff