--- /dev/null
+# Bird6-OpenWRT Library - Functions used in /etc/init.d/bird6 script.
+#
+#
+# Copyright (C) 2014-2017 - Eloi Carbo
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+
+# Function: writeToConfig $1
+# $1 string.
+# Allows to write in the $BIRD_CONFIG file, the string $1. This function does not check the $1 string.
+# Example: writeToConfig "value: $N"
+writeToConfig() {
+ echo "$1" >> ${BIRD_CONFIG}
+}
+
+
+# Function: write $1 $2
+# $1 string. $2 string.
+# This function checks if $2 is empty. If not, it writes the string $1 in the $BIRD_CONFIG file.
+# Use write function to check if $1, value found inside $2, is not empty and can be written in the configuration file.
+# Example: N=""; write "value: $N" $N;
+write() {
+ [ -n "$2" ] && writeToConfig "$1"
+}
+
+
+#Function: write_bool $1 $2
+# $1 string; $2 boolean
+# This function checks if $2 is true or false and write the $1 string into $BIRD_CONFIG file.
+# The function writes a # before the $2 string if its false.
+# Example: local N=0; write_bool $N
+write_bool() {
+ [ "$2" == 0 ] && writeToConfig "# $1;" || writeToConfig " $1;"
+}
+
+
+# Function: get $1 $2
+# $1 string. $2 string
+# This function uses the external UCI function "config_get $result $section $option" to obtain a string value from UCI config file.
+# To use this function, use the same name of the UCI option for the variable.
+# Example: UCI (option id 'abcd'); local id; get id $section
+get() {
+ config_get $1 $2 $1
+}
+
+
+# Function: get_bool $1 $2
+# $1 boolean. $2 string
+# This function uses the external UCI function "config_get_bool $result $section $option" to obtain a boolean value from UCI config file.
+# To use this function, use the same name of the UCI option for the variable $1.
+# Example: UCI (option use_ipv6 '1'); local use_ipv6; get use_ipv6 $section
+get_bool() {
+ config_get_bool $1 $2 $1
+}
+
+
+# Function: multipath_list $1
+# $1 string
+# This function writes the $1 string in the multipath routes.
+multipath_list() {
+ write " via $1" $1
+}
+
+
+# Function: prepare_tables $1
+# $1 string
+# This function gets each "table" section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI table section
+prepare_tables() {
+ local section="$1"; local name
+
+ get name ${section}
+
+ write "table ${name};" ${name}
+}
+
+
+# Function: prepare_global $1
+# $1 string
+# This function gets each "global" section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI global section. prepare_global is the first configuration set in the bird6.conf and removes the old file.
+prepare_global () {
+ local section="$1"
+ local log_file; local log; local debug; local router_id; local table
+ local listen_bgp_addr; local listen_bgp_port; local listen_bgp_dual
+
+ # Remove old configuration file
+ rm -f "${BIRD_CONFIG}"
+
+ get log_file ${section}
+ get log ${section}
+ get debug ${section}
+ get router_id ${section}
+ get table ${section}
+ get listen_bgp_addr ${section}
+ get listen_bgp_port ${section}
+ get listen_bgp_dual ${section}
+
+ # First line of the NEW configuration file
+ echo "#Bird6 configuration using UCI:" > ${BIRD_CONFIG}
+ writeToConfig " "
+ #TODO: Set Syslog as receiver if empty
+ # LOGF="${log_file:-syslog]}"
+ #TODO: If $log/$debug are empty, set to off
+ if [ -n "${log_file}" -a -n "${log}" ]; then
+ firstEntry="${log:0:3}"
+ if [ "${firstEntry}" = "all" -o "${firstEntry}" = "off" ]; then
+ writeToConfig 'log "'${log_file}'" '${firstEntry}';'
+ else
+ logEntries=$(echo ${log} | tr " " ",")
+ writeToConfig "log \"${log_file}\" { ${logEntries} };"
+ fi
+ fi
+
+ if [ -n "${debug}" ]; then
+ firstEntry="${debug:0:3}"
+ if [ "${firstEntry}" = "all" -o "${firstEntry}" = "off" ]; then
+ writeToConfig "debug protocols ${firstEntry};"
+ else
+ debugEntries=$(echo ${debug} | tr " " ",")
+ writeToConfig "debug protocols { ${debugEntries} };"
+ fi
+ fi
+ writeToConfig " "
+ writeToConfig "#Router ID"
+ write "router id ${router_id};" ${router_id}
+ writeToConfig " "
+ writeToConfig "#Secondary tables"
+ config_foreach prepare_tables 'table'
+ if [ -n "${listen_bgp_dual}" -o "${listen_bgp_dual}" = "0" ]; then
+ writeToConfig "listen bgp ${listen_bgp_addr} ${listen_bgp_port} v6only;"
+ else
+ writeToConfig "listen bgp ${listen_bgp_addr} ${listen_bgp_port} dual;"
+ fi
+ writeToConfig " "
+}
+
+
+# Function: prepare_routes $1
+# $1 string
+# This function gets each "route" section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI route section. Each type of route has its own treatment.
+prepare_routes() {
+ local instance; local prefix; local via; local type
+ local section="$1"
+ local protoInstance="$2"
+
+ get instance ${section}
+ get type ${section}
+ get prefix ${section}
+
+ if [ "${instance}" = "${protoInstance}" ]; then
+ case "${type}" in
+ "router")
+ get via ${section}
+ [ -n "${prefix}" -a -n "${via}" ] && writeToConfig " route ${prefix} via ${via};"
+ ;;
+ "special")
+ get attribute ${section}
+ [ -n "${prefix}" -a -n "${attribute}" ] && writeToConfig " route ${prefix} ${attribute};"
+ ;;
+ "iface")
+ get iface ${section}
+ [ -n "${prefix}" -a -n "${iface}" ] && writeToConfig ' route '${prefix}' via "'${iface}'";'
+ ;;
+ "multipath")
+ write " route ${prefix} multipath" ${prefix}
+ config_list_foreach ${section} l_via multipath_list
+ writeToConfig " ;"
+ ;;
+ esac
+ fi
+}
+
+
+# Function: prepare_kernel $1
+# $1 string
+# This function gets each "kernel" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI kernel section.
+prepare_kernel() {
+ local section="$1"
+ local disabled; local table; local kernel_table; local import; local export
+ local scan_time; local persist; local learn
+
+ get_bool disabled ${section}
+ get table ${section}
+ get import ${section}
+ get export ${section}
+ get scan_time ${section}
+ get kernel_table ${section}
+ get learn ${section}
+ get persist ${section}
+
+ write "#${section} configuration:" ${section}
+ writeToConfig "protocol kernel ${section} {" ${section}
+ write_bool disabled ${disabled}
+ write " table ${table};" ${table}
+ write " kernel table ${kernel_table};" ${kernel_table}
+ write_bool learn ${learn}
+ write_bool persist ${persist}
+ write " scan time ${scan_time};" ${scan_time}
+ write " import ${import};" ${import}
+ write " export ${export};" ${export}
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: prepare_static $1
+# $1 string
+# This function gets each "static" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI static section.
+prepare_static() {
+ local section="$1"
+ local disabled; local table
+
+ get disabled ${section}
+ get table ${section}
+
+ if [ "${disabled}" -eq 0 ]; then
+ writeToConfig "#${section} configration:" ${section}
+ writeToConfig "protocol static {"
+ write " table ${table};" ${table}
+ config_foreach prepare_routes 'route' ${section}
+ writeToConfig "}"
+ writeToConfig " "
+ fi
+}
+
+
+# Function: prepare_direct $1
+# $1 string
+# This function gets each "direct" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI direct section.
+prepare_direct() {
+ local section="$1"
+ local disabled; local interface
+
+ get disabled ${section}
+ get interface ${section}
+
+ write "#${section} configuration:" ${section}
+ writeToConfig "protocol direct {"
+ write_bool disabled ${disabled}
+ write " interface ${interface};" ${interface}
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: prepare_pipe $1
+# $1 string
+# This function gets each "pipe" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI direct section.
+prepare_pipe() {
+ local section="$1"
+ local disabled; local table; local peer_table; local mode; local import; local export
+
+ get disabled ${section}
+ get peer_table ${section}
+ get mode ${section}
+ get table ${section}
+ get import ${section}
+ get export ${section}
+
+ write "#${section} configuration:" ${section}
+ writeToConfig "protocol pipe ${section} {" ${section}
+ write_bool disabled ${disabled}
+ write " table ${table};" ${table}
+ write " peer table ${peer_table};" ${peer_table}
+ write " mode ${mode};" ${mode}
+ write " import ${import};" ${import}
+ write " export ${export};" ${export}
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: prepare_device $1
+# $1 string
+# This function gets each "device" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI device section.
+prepare_device() {
+ local section="$1"
+ local disabled; local scan_time
+
+ get disabled ${section}
+ get scan_time ${section}
+
+ write "#${section} configuration:" ${section}
+ writeToConfig "protocol device {"
+ write_bool disabled ${disabled}
+ write " scan time ${scan_time};" ${scan_time}
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: prepare_bgp_template $1
+# $1 string
+# This function gets each "bgp_template" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI bgp_template section.
+# Careful! Template options will be replaced by "instance" options if there is any match.
+prepare_bgp_template() {
+ local section="$1"
+ local disabled; local table; local import; local export; local local_address
+ local local_as; local neighbor_address; local neighbor_as; local source_address
+ local next_hop_self; local next_hop_keep; local rr_client; local rr_cluster_id
+ local import_limit; local import_limit_action; local export_limit; local export_limit_action
+ local receive_limit; local receive_limit_action; local igp_table
+
+ get_bool disabled ${section}
+ get_bool next_hop_self ${section}
+ get_bool next_hop_keep ${section}
+ get table ${section}
+ get import ${section}
+ get export ${section}
+ get local_address ${section}
+ get local_as ${section}
+ get igp_table ${section}
+ get rr_client ${section}
+ get rr_cluster_id ${section}
+ get import_limit ${section}
+ get import_limit_action ${section}
+ get export_limit ${section}
+ get export_limit_action ${section}
+ get receive_limit ${section}
+ get receive_limit_action ${section}
+ get neighbor_address ${section}
+ get neighbor_as ${section}
+
+ writeToConfig "#${section} template:"
+ writeToConfig "template bgp ${section} {"
+ [ -n "${disabled}" ] && write_bool disabled ${disabled}
+ write " table ${table};" ${table}
+ write " local as ${local_as};" ${local_as}
+ write " source address ${local_address};" ${local_address}
+ write " import ${import};" ${import}
+ write " export ${export};" ${export}
+ if [ -n "${next_hop_self}" ]; then
+ [ "${next_hop_self}" = "1" ] && writeToConfig " next hop self;" || writeToConfig "# next hop self;"
+ fi
+ if [ -n "${next_hop_keep}" ]; then
+ [ "${next_hop_keep}" = "1" ] && writeToConfig " next hop keep;" || writeToConfig "# next hop keep;"
+ fi
+ [ -n "${igp_table}" ] && writeToConfig " igp table ${igp_table};"
+ [ "${rr_client}" = "1" ] && writeToConfig " rr client;" || writeToConfig "# rr client;"
+ write " rr cluster id ${rr_cluster_id};" ${rr_cluster_id}
+ if [ -n "${import_limit}" -a "${import_limit}" > "0" ]; then
+ [ -z "${import_limit_action}" ] && ${import_limit_action} = "warn"
+ writeToConfig " import limit ${import_limit} action ${import_limit_action};"
+ fi
+ if [ -n "${export_limit}" -a "${export_limit}" > "0" ]; then
+ [ -z "${export_limit_action}" ] && ${export_limit_action} = "warn"
+ writeToConfig " export limit ${export_limit} action ${export_limit_action};"
+ fi
+ if [ -n "${receive_limit}" -a "${receive_limit}" > "0" ]; then
+ [ -z "${receive_limit_action}" ] && ${receive_limit_action} = "warn"
+ writeToConfig " receive limit ${receive_limit} action ${receive_limit_action};"
+ fi
+ [ -n "${neighbor_address}" -a -n "${neighbor_as}" ] && writeToConfig " neighbor ${neighbor_address} as ${neighbor_as};"
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: prepare_bgp $1
+# $1 string
+# This function gets each "bgp" protocol section in the UCI configuration and sets each option in the bird6.conf file.
+# $1 is set as the ID of the current UCI bgp section.
+# Careful! The options set in bgp instances overlap bgp_template ones.
+prepare_bgp() {
+ local section="$1"
+ local disabled; local table; local template; local description; local import
+ local export; local local_address; local local_as; local neighbor_address
+ local neighbor_as; local rr_client; local rr_cluster_id; local import_limit
+ local import_limit_action; local export_limit; local export_limit_action
+ local receive_limit; local receive_limit_action; local igp_table
+
+ get disabled ${section}
+ get table ${section}
+ get template ${section}
+ get description ${section}
+ get import ${section}
+ get export ${section}
+ get local_address ${section}
+ get local_as ${section}
+ get igp_table ${section}
+ get rr_client ${section}
+ get rr_cluster_id ${section}
+ get import_limit ${section}
+ get import_limit_action ${section}
+ get export_limit ${section}
+ get export_limit_action ${section}
+ get receive_limit ${section}
+ get receive_limit_action ${section}
+ get neighbor_address ${section}
+ get neighbor_as ${section}
+
+ writeToConfig "#${section} configuration:"
+ [ -n "${template}" ] && writeToConfig "protocol bgp ${section} from ${template} {" || writeToConfig "protocol bgp ${section} {"
+ [ -n "${disabled}" ] && write_bool disabled ${disabled}
+ write " table ${table};" ${table}
+ write " local as ${local_as};" ${local_as}
+ write " source address ${local_address};" ${local_address}
+ write " import ${import};" ${import}
+ write " export ${export};" ${export}
+ if [ -n "${next_hop_self}" ]; then
+ [ "${next_hop_self}" = "1" ] && writeToConfig " next hop self;" || writeToConfig "# next hop self;"
+ fi
+ if [ -n "${next_hop_keep}" ]; then
+ [ "${next_hop_keep}" = "1" ] && writeToConfig " next hop keep;" || writeToConfig "# next hop keep;"
+ fi
+ [ -n "${igp_table}" ] && writeToConfig " igp table ${igp_table};"
+ [ "${rr_client}" = "1" ] && writeToConfig " rr client;" || writeToConfig "# rr client;"
+ write " rr cluster id ${rr_cluster_id};" ${rr_cluster_id}
+ if [ -n "${import_limit}" -a "${import_limit}" > "0" ]; then
+ [ -z "${import_limit_action}" ] && ${import_limit_action} = "warn"
+ writeToConfig " import limit ${import_limit} action ${import_limit_action};"
+ fi
+ if [ -n "${export_limit}" -a "${export_limit}" > "0" ]; then
+ [ -z "${export_limit_action}" ] && ${export_limit_action} = "warn"
+ writeToConfig " export limit ${export_limit} action ${export_limit_action};"
+ fi
+ if [ -n "${receive_limit}" -a "${receive_limit}" > "0" ]; then
+ [ -z "${receive_limit_action}" ] && ${receive_limit_action} = "warn"
+ writeToConfig " receive limit ${receive_limit} action ${receive_limit_action};"
+ fi
+ [ -n "${neighbor_address}" -a -n "${neighbor_as}" ] && writeToConfig " neighbor ${neighbor_address} as ${neighbor_as};"
+ writeToConfig "}"
+ writeToConfig " "
+}
+
+
+# Function: gather_filters
+# This function gets all the FILES under /filters folder and adds
+# them into the config as %include elements on top of the file
+# If there are no filters, the section will remain empty.
+gather_filters() {
+ writeToConfig "#Filters Section:"
+ for filter in $(find /etc/${BIRD}/filters -type f); do
+ writeToConfig "include \"${filter}\";"
+ done
+ writeToConfig "#End of Filters --"
+ writeToConfig " "
+}
+
+
+# Function: gather_functions
+# This function gets all the FILES under /functions folder and adds
+# them into the config as %include elements on top of the file
+# If there are no filters, the section will remain empty.
+gather_functions() {
+ writeToConfig "#Functions Section:"
+ for func in $(find /etc/${BIRD}/functions -type f); do
+ writeToConfig "include \"${func}\";"
+ done
+ writeToConfig "#End of Functions --"
+ writeToConfig " "
+}