+++ /dev/null
-
-# THIS CONFIG FILE IS NOT A COMPLETE DOCUMENTATION
-# PLEASE LOOK IN THE BIRD DOCUMENTATION FOR MORE INFO
-
-# However, most of options used here are just for example
-# and will be removed in real-life configs.
-
-log syslog all;
-
-# Override router ID
-#router id 192.168.0.1;
-
-# Turn on global debugging of all protocols
-#debug protocols all;
-
-
-# Define a route filter...
-# filter test_filter {
-# if net ~ 10.0.0.0/16 then accept;
-# else reject;
-# }
-
-# The direct protocol automatically generates device routes to all network
-# interfaces. Can exist in as many instances as you wish if you want to
-# populate multiple routing tables with device routes. Because device routes
-# are handled by Linux kernel, this protocol is usually not needed.
-# protocol direct {
-# interface "*"; # Restrict network interfaces it works with
-# }
-
-# This pseudo-protocol performs synchronization between BIRD's routing
-# tables and the kernel. You can run multiple instances of the kernel
-# protocol and synchronize different kernel tables with different BIRD tables.
-protocol kernel {
-# learn; # Learn all alien routes from the kernel
-# persist; # Don't remove routes on bird shutdown
- scan time 20; # Scan kernel routing table every 20 seconds
-# import none; # Default is import all
-# export all; # Default is export none
-}
-
-# This pseudo-protocol watches all interface up/down events.
-protocol device {
- scan time 10; # Scan interfaces every 10 seconds
-}
-
-# Static routes (again, there can be multiple instances, so that you
-# can disable/enable various groups of static routes on the fly).
-protocol static {
-# export all; # Default is export none
-# route 0.0.0.0/0 via 62.168.0.13;
-# route 10.0.0.0/8 reject;
-# route 192.168.0.0/16 reject;
-}
-
-
-#protocol rip {
-# disabled;
-# import all;
-# export all;
-# export filter test_filter;
-
-# port 1520;
-# period 7;
-# infinity 16;
-# garbage time 60;
-# interface "*" { mode broadcast; };
-# honor neighbor;
-# honor always;
-# honor never;
-# authentication none;
-#}
-
-
-#protocol ospf {
-# disabled;
-# import all;
-# export all;
-# export where source = RTS_STATIC;
-
-# area 0 {
-# interface "eth*" {
-# cost 10;
-# hello 3;
-# retransmit 2;
-# wait 5;
-# dead 20;
-# type broadcast;
-# authentication simple;
-# password "pass";
-# };
-# };
-#}
-
-
-#protocol bgp {
-# disabled;
-# import all;
-# export all;
-# export where source = RTS_STATIC;
-
-# local as 65000;
-# neighbor 192.168.1.1 as 65001;
-# multihop 20 via 192.168.2.1;
-
-# hold time 240;
-# startup hold time 240;
-# connect retry time 120;
-# keepalive time 80; # defaults to hold time / 3
-# start delay time 5; # How long do we wait before initial connect
-# error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
-# # errors occur, we increase the delay exponentially ...
-# error forget time 300; # ... until this timeout expires)
-# disable after error; # Disable the protocol automatically when an error occurs
-# next hop self; # Disable next hop processing and always advertise our local address as nexthop
-# source address 62.168.0.14; # What local address we use for the TCP connection
-# password "secret" # Password used for MD5 authentication
-# rr client; # I am a route reflector and the neighor is my client
-# rr cluster id 1.0.0.1 # Use this value for cluster id instead of my router id
-# };
-#}
projects / feed / routing.git / blobdiff