--- /dev/null
+
+# THIS CONFIG FILE IS NOT A COMPLETE DOCUMENTATION
+# PLEASE LOOK IN THE BIRD DOCUMENTATION FOR MORE INFO
+
+# However, most of options used here are just for example
+# and will be removed in real-life configs.
+
+log syslog all;
+
+# Override router ID
+#router id 192.168.0.1;
+
+# Turn on global debugging of all protocols
+#debug protocols all;
+
+
+# Define a route filter...
+# filter test_filter {
+# if net ~ 10.0.0.0/16 then accept;
+# else reject;
+# }
+
+# The direct protocol automatically generates device routes to all network
+# interfaces. Can exist in as many instances as you wish if you want to
+# populate multiple routing tables with device routes. Because device routes
+# are handled by Linux kernel, this protocol is usually not needed.
+# protocol direct {
+# interface "*"; # Restrict network interfaces it works with
+# }
+
+# This pseudo-protocol performs synchronization between BIRD's routing
+# tables and the kernel. You can run multiple instances of the kernel
+# protocol and synchronize different kernel tables with different BIRD tables.
+protocol kernel {
+# learn; # Learn all alien routes from the kernel
+# persist; # Don't remove routes on bird shutdown
+ scan time 20; # Scan kernel routing table every 20 seconds
+# import none; # Default is import all
+# export all; # Default is export none
+}
+
+# This pseudo-protocol watches all interface up/down events.
+protocol device {
+ scan time 10; # Scan interfaces every 10 seconds
+}
+
+# Static routes (again, there can be multiple instances, so that you
+# can disable/enable various groups of static routes on the fly).
+protocol static {
+# export all; # Default is export none
+# route 0.0.0.0/0 via 62.168.0.13;
+# route 10.0.0.0/8 reject;
+# route 192.168.0.0/16 reject;
+}
+
+
+#protocol rip {
+# disabled;
+# import all;
+# export all;
+# export filter test_filter;
+
+# port 1520;
+# period 7;
+# infinity 16;
+# garbage time 60;
+# interface "*" { mode broadcast; };
+# honor neighbor;
+# honor always;
+# honor never;
+# authentication none;
+#}
+
+
+#protocol ospf {
+# disabled;
+# import all;
+# export all;
+# export where source = RTS_STATIC;
+
+# area 0 {
+# interface "eth*" {
+# cost 10;
+# hello 3;
+# retransmit 2;
+# wait 5;
+# dead 20;
+# type broadcast;
+# authentication simple;
+# password "pass";
+# };
+# };
+#}
+
+
+#protocol bgp {
+# disabled;
+# import all;
+# export all;
+# export where source = RTS_STATIC;
+
+# local as 65000;
+# neighbor 192.168.1.1 as 65001;
+# multihop 20 via 192.168.2.1;
+
+# hold time 240;
+# startup hold time 240;
+# connect retry time 120;
+# keepalive time 80; # defaults to hold time / 3
+# start delay time 5; # How long do we wait before initial connect
+# error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
+# # errors occur, we increase the delay exponentially ...
+# error forget time 300; # ... until this timeout expires)
+# disable after error; # Disable the protocol automatically when an error occurs
+# next hop self; # Disable next hop processing and always advertise our local address as nexthop
+# source address 62.168.0.14; # What local address we use for the TCP connection
+# password "secret" # Password used for MD5 authentication
+# rr client; # I am a route reflector and the neighor is my client
+# rr cluster id 1.0.0.1 # Use this value for cluster id instead of my router id
+# };
+#}
projects / feed / routing.git / blobdiff