nodogsplash: update to release 3.0.0

[feed/routing.git] / nodogsplash / files / nodogsplash.config

diff --git a/nodogsplash/files/nodogsplash.config b/nodogsplash/files/nodogsplash.config
deleted file mode 100644 (file)
index 9626b80..0000000
--- a/nodogsplash/files/nodogsplash.config
+++ /dev/null
@@ -1,53 +0,0 @@
-
-# The options available here are an adaptation of the settings used in nodogsplash.conf.
-# See https://github.com/nodogsplash/nodogsplash/blob/master/resources/nodogsplash.conf
-
-config nodogsplash
-  # Set to 1 to enable nodogsplash
-  option enabled 0
-
-  # Use plain configuration file
-  #option config '/etc/nodogsplash/nodogsplash.conf'
-
-  # The network the users are connected to
-  option network 'lan'
-  option gatewayname 'OpenWrt Nodogsplash'
-  option maxclients '250'
-  option clientidletimeout '1200'
-
-  # Your router may have several interfaces, and you
-  # probably want to keep them private from the network/gatewayinterface.
-  # If so, you should block the entire subnets on those interfaces, e.g.:
-  list authenticated_users 'block to 192.168.0.0/16'
-  list authenticated_users 'block to 10.0.0.0/8'
-
-  # Typical ports you will probably want to open up.
-  list authenticated_users 'allow tcp port 22'
-  list authenticated_users 'allow tcp port 53'
-  list authenticated_users 'allow udp port 53'
-  list authenticated_users 'allow tcp port 80'
-  list authenticated_users 'allow tcp port 443'
-
-  # For preauthenticated users to resolve IP addresses in their
-  # initial request not using the router itself as a DNS server,
-  list preauthenticated_users 'allow tcp port 53'
-  list preauthenticated_users 'allow udp port 53'
-
-  # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
-  list users_to_router 'allow tcp port 22'
-  list users_to_router 'allow tcp port 23'
-  list users_to_router 'allow tcp port 53'
-  list users_to_router 'allow udp port 53'
-  list users_to_router 'allow udp port 67'
-  list users_to_router 'allow tcp port 80'
-  list users_to_router 'allow tcp port 443'
-
-  # MAC addresses that are / are not allowed to access the splash page
-  # Value is either 'allow' or 'block'. The allowedmac or blockedmac list is used.
-  #option macmechanism 'allow'
-  #list allowedmac '00:00:C0:01:D0:0D'
-  #list allowedmac '00:00:C0:01:D0:1D'
-  #list blockedmac '00:00:C0:01:D0:2D'
-
-  #MAC addresses that do not need to authenticate
-  #list trustedmac '00:00:C0:01:D0:1D'