nodogsplash2: change configuration defaults (#341)

[feed/routing.git] / nodogsplash2 / files / nodogsplash.config

diff --git a/nodogsplash2/files/nodogsplash.config b/nodogsplash2/files/nodogsplash.config
index 3af939f4d4e48763c3f52bdff28b1654953ef7a5..a47579e4593c88f02b5c0bdca351b073967ee01f 100644 (file)
--- a/nodogsplash2/files/nodogsplash.config
+++ b/nodogsplash2/files/nodogsplash.config
@@ -3,8 +3,8 @@
 # See https://github.com/nodogsplash/nodogsplash/blob/master/resources/nodogsplash.conf
 
 config nodogsplash
-  # Set to 1 to enable nodogsplash
-  option enabled 0
+  # Set to 0 to disable nodogsplash
+  option enabled 1
 
   # Serve the file splash.html from this directory
   option webroot '/etc/nodogsplash/htdocs'
@@ -14,27 +14,34 @@ config nodogsplash
 
   # The network the users are connected to
   option network 'lan'
-  option gatewayname 'LEDE Nodogsplash'
+  option gatewayname 'OpenWrt Nodogsplash'
   option maxclients '250'
-  option clientidletimeout '1200'
+  #Client timeouts in minutes
+  option clientidletimeout '120'
+  option clientforcetimeout '1440'
+
 
   # Your router may have several interfaces, and you
   # probably want to keep them private from the network/gatewayinterface.
   # If so, you should block the entire subnets on those interfaces, e.g.:
-  list authenticated_users 'block to 192.168.0.0/16'
-  list authenticated_users 'block to 10.0.0.0/8'
+  # list authenticated_users 'block to 192.168.0.0/16'
+  # list authenticated_users 'block to 10.0.0.0/8'
 
   # Typical ports you will probably want to open up.
-  list authenticated_users 'allow tcp port 22'
-  list authenticated_users 'allow tcp port 53'
-  list authenticated_users 'allow udp port 53'
-  list authenticated_users 'allow tcp port 80'
-  list authenticated_users 'allow tcp port 443'
+  #list authenticated_users 'allow tcp port 22'
+  #list authenticated_users 'allow tcp port 53'
+  #list authenticated_users 'allow udp port 53'
+  #list authenticated_users 'allow tcp port 80'
+  #list authenticated_users 'allow tcp port 443'
+  #Or for happy customers allow all
+  list authenticated_users 'allow all'
+
 
   # For preauthenticated users to resolve IP addresses in their
   # initial request not using the router itself as a DNS server,
-  list preauthenticated_users 'allow tcp port 53'
-  list preauthenticated_users 'allow udp port 53'
+  # Leave commented to help prevent DNS tunnelling
+  #list preauthenticated_users 'allow tcp port 53'
+  #list preauthenticated_users 'allow udp port 53'
 
   # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
   list users_to_router 'allow tcp port 22'
@@ -43,7 +50,6 @@ config nodogsplash
   list users_to_router 'allow udp port 53'
   list users_to_router 'allow udp port 67'
   list users_to_router 'allow tcp port 80'
-  list users_to_router 'allow tcp port 443'
 
   # MAC addresses that are / are not allowed to access the splash page
   # Value is either 'allow' or 'block'. The allowedmac or blockedmac list is used.
@@ -54,3 +60,8 @@ config nodogsplash
 
   #MAC addresses that do not need to authenticate
   #list trustedmac '00:00:C0:01:D0:1D'
+
+  # Set FW_MARK for compatibilty with other OpenWrt Packages eg mwan3, sqm etc.
+  list fw_mark_authenticated '520'
+  list fw_mark_trusted '510'
+  list fw_mark_blocked '500'