rename the <boardname>-<kernelversion> directories of base-files to just <boardname...

[openwrt/openwrt.git] / package / base-files / brcm-2.6 / etc / init.d / netconfig

diff --git a/package/base-files/brcm-2.6/etc/init.d/netconfig b/package/base-files/brcm-2.6/etc/init.d/netconfig
deleted file mode 100755 (executable)
index fe39f50..0000000
--- a/package/base-files/brcm-2.6/etc/init.d/netconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-       [ -e /etc/config/network ] && exit 0
-
-       mkdir -p /etc/config
-
-       (
-               if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-                       # WGT634u
-                       echo boardtype=wgt634u
-               else
-                       strings /dev/mtdblock/3
-               fi
-       ) | awk '
-       function p(cfgname, name) {
-               if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
-       }
-       
-       BEGIN {
-               FS="="
-               c["lan_ifname"]="eth0.0"
-               c["wan_ifname"]="eth0.1"
-               c["vlan0ports"]="1 2 3 4 5*"
-               c["vlan1ports"]="0 5"
-       }
-       
-       ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-               nvram[$1] = $2
-       }
-       
-       END {
-               # v1 hardware
-               if (nvram["boardtype"] == "bcm94710dev") {
-                       # Asus WL-500g
-                       if (nvram["boardnum"] == "asusX") {
-                               c["lan_ifname"]="eth0 eth1" # FIXME
-                               c["wan_ifname"]=""
-                       }
-               }
-               if (nvram["boardtype"] == "bcm94710r4") {
-                       # Toshiba WRC-1000
-                       c["lan_ifname"] = "eth0"
-                       c["wan_ifname"] = "eth1"
-               }
-               if (nvram["boardtype"] == "wgt634u") {
-                       c["vlan0ports"] = "0 1 2 3 5*"
-                       c["vlan1ports"] = "4 5"
-               }
-               if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-                       if (nvram["boardnum"] == "45") {
-                               c["vlan0ports"] = "1 2 3 4 5*"
-                               c["vlan1ports"] = "0 5"
-                       } else {
-                               c["vlan0ports"] = "0 1 2 3 5*"
-                               c["vlan1ports"] = "4 5"
-                       }
-               }
-       
-               # WAP54G
-               if ((nvram["boardnum"] == "2") || \
-                       (nvram["boardnum"] == "1024")) {
-                       c["lan_ifname"]="eth0"
-                       c["wan_ifname"]=""
-               }
-       
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
-               print "#### Loopback configuration"
-               print "config interface loopback"
-               print " option ifname   \"lo\""
-               print " option proto    static"
-               print " option ipaddr   127.0.0.1"
-               print " option netmask  255.0.0.0"
-               print ""
-               print ""
-               print "#### LAN configuration"
-               print "config interface lan"
-               print " option type     bridge"
-               p("ifname", "lan_ifname")
-               print " option proto    static"
-               print " option ipaddr   192.168.1.1"
-               print " option netmask  255.255.255.0"
-               print ""
-               print ""
-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               print " option proto    dhcp"
-       }' > /etc/config/network
-}