x86: drop ep80579-drivers

[openwrt/openwrt.git] / package / kernel / ep80579-drivers / patches / 100-iegbe_netdev_ops.patch

diff --git a/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch b/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
deleted file mode 100644 (file)
index 162449c..0000000
--- a/package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
-       kfree(data);
- }
- 
-+static const struct net_device_ops iegbe_netdev_ops = {
-+      .ndo_open               = iegbe_open,
-+      .ndo_stop               = iegbe_close,
-+      .ndo_start_xmit         = iegbe_xmit_frame,
-+      .ndo_get_stats          = iegbe_get_stats,
-+      .ndo_set_rx_mode        = iegbe_set_rx_mode,
-+      .ndo_set_mac_address    = iegbe_set_mac,
-+      .ndo_tx_timeout         = iegbe_tx_timeout,
-+      .ndo_change_mtu         = iegbe_change_mtu,
-+      .ndo_do_ioctl           = iegbe_ioctl,
-+      .ndo_validate_addr      = eth_validate_addr,
-+
-+      .ndo_vlan_rx_register   = iegbe_vlan_rx_register,
-+      .ndo_vlan_rx_add_vid    = iegbe_vlan_rx_add_vid,
-+      .ndo_vlan_rx_kill_vid   = iegbe_vlan_rx_kill_vid,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+      .ndo_poll_controller    = iegbe_netpoll,
-+#endif
-+};
-+
- /**
-  * iegbe_probe - Device Initialization Routine
-  * @pdev: PCI device information struct
-@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
-       if (!hw->hw_addr)
-         goto err_ioremap;
- 
--    netdev->open = &iegbe_open;
--    netdev->stop = &iegbe_close;
--    netdev->hard_start_xmit = &iegbe_xmit_frame;
--    netdev->get_stats = &iegbe_get_stats;
--      netdev->set_rx_mode = &iegbe_set_rx_mode;
--      netdev->set_mac_address = &iegbe_set_mac;
--    netdev->change_mtu = &iegbe_change_mtu;
--    netdev->do_ioctl = &iegbe_ioctl;
-+      netdev->netdev_ops = &iegbe_netdev_ops;
-       set_ethtool_ops(netdev);
--    netdev->tx_timeout = &iegbe_tx_timeout;
-       netdev->watchdog_timeo = 5 * HZ;
-       netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
--    netdev->vlan_rx_register = iegbe_vlan_rx_register;
--    netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
--    netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
--#ifdef CONFIG_NET_POLL_CONTROLLER
--    netdev->poll_controller = iegbe_netpoll;
--#endif
-+
-       strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
- 
-