move lots of kernel related packages to the new system/ folder

[openwrt/openwrt.git] / package / ltq-vmmc / Config.in

diff --git a/package/ltq-vmmc/Config.in b/package/ltq-vmmc/Config.in
deleted file mode 100644 (file)
index 3a5e014..0000000
--- a/package/ltq-vmmc/Config.in
+++ /dev/null
@@ -1,95 +0,0 @@
-choice
-       prompt "device selection"
-       depends on PACKAGE_kmod-ltq-vmmc
-       default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
-       help
-               Select the target device.
-
-       config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
-               bool "Danube, Twinpass, Vinax"
-               depends on TARGET_lantiq_danube
-
-       config VOICE_CPE_VMMC_WITH_DEVICE_AR9
-               bool "AR9 family"
-               depends on TARGET_lantiq_ar9
-
-       config VOICE_CPE_VMMC_WITH_DEVICE_VR9
-               bool "VR9 family"
-               depends on TARGET_lantiq_vr9
-       
-       config VOICE_VMMC_WITH_DEVICE_FALCON
-               bool "FALC-ON"
-               depends on (TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable)
-
-endchoice
-
-choice
-       depends on PACKAGE_kmod-ltq-vmmc
-       prompt "FXS coefficients"
-       default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
-       help
-               Select country specific FXS coefficient file.
-
-       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
-               bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz" 
-               help
-                 These coefficents contains a parameter set with line impedance Zr according to ETSI.
-
-                 T:   gain in transmit direction (attenuation 3dBr) [dBr]
-                 R:   gain in receive direction (attenuation 10dBr) [dBr]
-                 Vl:  on-hook voltage limit [V]
-                 Ic:  off-hook loop current [mA]
-                 Vid: low-power-standby voltage [V]
-                 Vri: ring voltage [v]
-                 f:   ring frequency [V]
-
-       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
-               bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
-               help
-                 These coefficents contains a parameter set with line impedance e.g. for USA.
- 
-                 T:   gain in transmit direction (attenuation 3dBr) [dBr]
-                 R:   gain in receive direction (attenuation 10dBr) [dBr]
-                 Vl:  on-hook voltage limit [V]
-                 Ic:  off-hook loop current [mA]
-                 Vid: low-power-standby voltage [V]
-                 Vri: ring voltage [v]
-                 f:   ring frequency [V]
-
-       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
-               bool "Select own FXS coefficient file"
-endchoice
-
-config VOICE_CPE_VMMC_PMC
-       depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
-       bool "Power Management Control support"
-       default n
-       help
-               Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
-
-config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
-       bool "Disable DECT nibble swap"
-       depends on PACKAGE_kmod-ltq-vmmc
-       default n
-       help
-               Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
-
-config VOICE_CPE_VMMC_EVENT_LOGGER
-       depends on BROKEN
-       bool "Event logger support"
-       depends on PACKAGE_kmod-ltq-vmmc
-       default n
-       help
-               Option to enable details traces between drv_vmmc and the voice FW
-               - for debugging only
-               - requires package ifx-evtlog
-
-config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
-       int "MPS history buffer in words (0<=size<=512)"
-       depends on PACKAGE_kmod-ltq-vmmc
-       default "128"
-       help
-               MPS history buffer (default=128 words, maximum=512 words, 0=disable)
-               To opimize the memory footprint in RAM, you might want to set the
-               buffer size to 0.
-