ltq-vdsl-app: rename to ltq-vdsl-vr9-app

[openwrt/openwrt.git] / package / network / config / ltq-vdsl-vr9-app / Makefile

diff --git a/package/network/config/ltq-vdsl-vr9-app/Makefile b/package/network/config/ltq-vdsl-vr9-app/Makefile
new file mode 100644 (file)
index 0000000..c799145
--- /dev/null
+++ b/package/network/config/ltq-vdsl-vr9-app/Makefile
@@ -0,0 +1,82 @@
+# Copyright (C) 2010 OpenWrt.org
+# Copyright (C) 2015-2016 Lantiq Beteiligungs GmbH & Co KG.
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ltq-vdsl-vr9-app
+PKG_VERSION:=4.17.18.6
+PKG_RELEASE:=$(AUTORELEASE)
+PKG_BASE_NAME:=dsl_cpe_control
+PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=@OPENWRT
+PKG_HASH:=da8bb929526a61aea0e153ef524331fcd472a1ebbc6d88ca017735a4f82ece02
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BASE_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=BSD-2-Clause
+
+PKG_BUILD_DEPENDS:=ltq-vdsl-vr9
+
+PKG_FLAGS:=nonshared
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ltq-vdsl-vr9-app
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Lantiq VDSL userland tool
+  URL:=http://www.lantiq.com/
+  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
+endef
+
+define Package/ltq-vdsl-vr9-app/description
+  Userland tool needed to control Lantiq VDSL CPE
+endef
+
+# ltq-vdsl-vr9-app uses a header provided by the MEI driver which has some
+# conditionals.
+#
+# Define them here with the default values they would get in the MEI driver,
+# have the same view on both sides.
+#
+# If you change them, you need to change them for the ltq-vdsl-vr9-app as well
+VDSL_APP_CFLAGS = \
+       -DMAX_CLI_PIPES=1 \
+       -DMEI_SUPPORT_DEBUG_STREAMS=1 \
+       -DMEI_SUPPORT_OPTIMIZED_FW_DL=1
+
+CONFIGURE_ARGS += \
+       --enable-vrx \
+       --enable-vrx-device=vr9 \
+       --enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \
+       --enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \
+       --enable-ifxos \
+       --enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
+       --enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
+       --enable-add-appl-cflags="$(VDSL_APP_CFLAGS)"  \
+       --enable-debug \
+       --disable-dti \
+       --with-channels-per-line="1"
+
+CONFIGURE_ARGS += \
+       --enable-model=full \
+       --enable-dsl-ceoc=no
+#CONFIGURE_ARGS += --enable-model=lite
+#CONFIGURE_ARGS += --enable-model=footprint
+#CONFIGURE_ARGS += --enable-model=typical
+#CONFIGURE_ARGS += --enable-model=debug
+
+define Package/ltq-vdsl-vr9-app/install
+       $(INSTALL_DIR) $(1)/etc/init.d $(1)/sbin $(1)/etc/hotplug.d/dsl
+       $(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
+       $(INSTALL_BIN) ./files/10_atm.sh $(1)/etc/hotplug.d/dsl
+       $(INSTALL_BIN) ./files/10_ptm.sh $(1)/etc/hotplug.d/dsl
+
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
+       $(INSTALL_BIN) ./files/dsl_cpe_pipe.sh $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ltq-vdsl-vr9-app))