hostapd_common_add_device_config() {
config_add_array basic_rate
config_add_array supported_rates
+ config_add_string beacon_rate
- config_add_string country
+ config_add_string country country3
config_add_boolean country_ie doth
config_add_boolean spectrum_mgmt_required
config_add_int local_pwr_constraint
config_add_string require_mode
config_add_boolean legacy_rates
config_add_int cell_density
+ config_add_int rts_threshold
+ config_add_int rssi_reject_assoc_rssi
+ config_add_int rssi_ignore_probe_request
+ config_add_int maxassoc
config_add_string acs_chan_bias
config_add_array hostapd_options
local config="$1"
local driver="$2"
- local base="${config%%.conf}"
local base_cfg=
- json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
- acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density
+ json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+ acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
+ rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc
hostapd_set_log_options base_cfg
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
+ [ -n "$country3" ] && append base_cfg "country3=$country3" "$N"
[ "$country_ie" -gt 0 ] && {
append base_cfg "ieee80211d=1" "$N"
hostapd_add_rate brlist "$br"
done
+ [ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+ [ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
+ [ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
append base_cfg "beacon_int=$beacon_int" "$N"
+ [ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
append base_cfg "dtim_period=$dtim_period" "$N"
[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
+ [ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
json_get_values opts hostapd_options
for val in $opts; do
config_add_int acct_port
config_add_int acct_interval
+ config_add_int bss_load_update_period chan_util_avg_period
+
config_add_string dae_client
config_add_string dae_secret
config_add_int dae_port
config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
config_add_string ieee80211w_mgmt_cipher
- config_add_int dynamic_vlan vlan_naming
+ config_add_int dynamic_vlan vlan_naming vlan_no_bridge
config_add_string vlan_tagged_interface vlan_bridge
config_add_string vlan_file
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
- config_add_boolean wnm_sleep_mode bss_transition
+ config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
config_add_int time_advertisement
config_add_string time_zone
config_add_array supported_rates
config_add_boolean sae_require_mfp
+ config_add_int sae_pwe
config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
config_add_int iw_ipaddr_type_availability iw_gas_address3
config_add_string iw_hessid iw_network_auth_type iw_qos_map_set
config_add_array iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
- config_add_array iw_anqp_elem
+ config_add_array iw_anqp_elem iw_venue_name iw_venue_url
config_add_boolean hs20 disable_dgaf osen
config_add_int anqp_domain_id
config_add_array hs20_conn_capab
config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+ config_add_string hs20_t_c_server_url
+
config_add_array airtime_sta_weight
config_add_int airtime_bss_weight airtime_bss_limit
+ config_add_boolean multicast_to_unicast proxy_arp per_sta_vif
+
config_add_array hostapd_bss_options
+
+ config_add_boolean request_cui
+ config_add_array radius_auth_req_attr
+ config_add_array radius_acct_req_attr
+
+ config_add_int eap_server
+ config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
}
hostapd_set_vlan_file() {
[ -n "$1" ] && append bss_conf "nai_realm=$1" "$N"
}
+append_iw_venue_name() {
+ append bss_conf "venue_name=$1" "$N"
+}
+
+append_iw_venue_url() {
+ append bss_conf "venue_url=$1" "$N"
+}
+
append_hs20_oper_friendly_name() {
append bss_conf "hs20_oper_friendly_name=$1" "$N"
}
+append_osu_provider_friendly_name() {
+ append bss_conf "osu_friendly_name=$1" "$N"
+}
+
append_osu_provider_service_desc() {
append bss_conf "osu_service_desc=$1" "$N"
}
}
append_osu_provider() {
- local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
+ local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list
config_load wireless
config_get cfgtype "$1" TYPE
append bss_conf "osu_method_list=$osu_method_list" "$N"
config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc
+ config_list_foreach "$1" osu_friendly_name append_osu_friendly_name
config_list_foreach "$1" osu_icon append_osu_icon
append bss_conf "$N"
[ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N"
}
+append_radius_acct_req_attr() {
+ [ -n "$1" ] && append bss_conf "radius_acct_req_attr=$1" "$N"
+}
+
+append_radius_auth_req_attr() {
+ [ -n "$1" ] && append bss_conf "radius_auth_req_attr=$1" "$N"
+}
+
append_airtime_sta_weight() {
[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
}
macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
acct_server acct_secret acct_port acct_interval \
- bss_load_update_period chan_util_avg_period sae_require_mfp \
+ bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
- airtime_bss_weight airtime_bss_limit airtime_sta_weight
+ airtime_bss_weight airtime_bss_limit airtime_sta_weight \
+ multicast_to_unicast proxy_arp per_sta_vif \
+ eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id
set_default isolate 0
set_default maxassoc 0
set_default multi_ap 0
set_default airtime_bss_weight 0
set_default airtime_bss_limit 0
+ set_default eap_server 0
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
[ -n "$acct_interval" ] && \
append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+ json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
}
case "$auth_type" in
;;
esac
[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
+ [ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"
local vlan_possible=""
auth_server auth_secret auth_port \
dae_client dae_secret dae_port \
ownip radius_client_addr \
- eap_reauth_period
+ eap_reauth_period request_cui
# radius can provide VLAN ID for clients
vlan_possible=1
set_default auth_port 1812
set_default dae_port 3799
+ set_default request_cui 0
+ [ "$eap_server" -eq 0 ] && {
+ append bss_conf "auth_server_addr=$auth_server" "$N"
+ append bss_conf "auth_server_port=$auth_port" "$N"
+ append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+ }
- append bss_conf "auth_server_addr=$auth_server" "$N"
- append bss_conf "auth_server_port=$auth_port" "$N"
- append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-
+ [ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
[ -n "$dae_client" -a -n "$dae_secret" ] && {
append bss_conf "radius_das_port=$dae_port" "$N"
append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
}
+ json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
set_default wps_independent 1
wps_state=2
- [ -n "$wps_configured" ] && wps_state=1
+ [ -n "$wps_not_configured" ] && wps_state=1
[ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
append bss_conf "iapp_interface=$ifname" "$N"
}
- json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
+ json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
set_default bss_transition 0
set_default wnm_sleep_mode 0
+ set_default wnm_sleep_mode_no_keys 0
[ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N"
[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
- [ "$wnm_sleep_mode" -eq "1" ] && append bss_conf "wnm_sleep_mode=1" "$N"
+ if [ "$wnm_sleep_mode" -eq "1" ]; then
+ append bss_conf "wnm_sleep_mode=1" "$N"
+ [ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N"
+ fi
[ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N"
json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report
append bss_conf "ftm_responder=1" "$N"
[ "$stationary_ap" -eq "1" ] && append bss_conf "stationary_ap=1" "$N"
[ -n "$lci" ] && append bss_conf "lci=$lci" "$N"
- [ -n "$civic" ] && append bss_conf "lci=$civic" "$N"
+ [ -n "$civic" ] && append bss_conf "civic=$civic" "$N"
}
fi
if [ "$ieee80211r" -gt "0" ]; then
json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
-
+
set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
set_default ft_over_ds 1
set_default reassociation_deadline 1000
;;
esac
+ [ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
append bss_conf "mobility_domain=$mobility_domain" "$N"
append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
append bss_conf "ft_over_ds=$ft_over_ds" "$N"
set_default r0_key_lifetime 10000
set_default pmk_r1_push 0
+ [ -n "$r0kh" -a -n "$r1kh" ] || {
+ key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
+
+ set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+ set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
+ }
+
[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
}
[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
- json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
+ json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file vlan_no_bridge
set_default vlan_naming 1
[ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan
append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
append bss_conf "vlan_naming=$vlan_naming" "$N"
- [ -n "$vlan_bridge" ] && \
+ if [ -n "$vlan_bridge" ]; then
append bss_conf "vlan_bridge=$vlan_bridge" "$N"
+ else
+ set_default vlan_no_bridge 1
+ fi
+ append bss_conf "vlan_no_bridge=$vlan_no_bridge" "$N"
[ -n "$vlan_tagged_interface" ] && \
append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
[ -n "$vlan_file" ] && {
json_get_vars iw_hessid iw_venue_group iw_venue_type iw_network_auth_type
json_get_vars iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm
json_get_vars iw_anqp_elem iw_qos_map_set iw_ipaddr_type_availability iw_gas_address3
+ json_get_vars iw_venue_name iw_venue_url
set_default iw_enabled 0
if [ "$iw_enabled" = "1" ]; then
json_for_each_item append_iw_roaming_consortium iw_roaming_consortium
json_for_each_item append_iw_anqp_elem iw_anqp_elem
json_for_each_item append_iw_nai_realm iw_nai_realm
+ json_for_each_item append_iw_venue_name iw_venue_name
+ json_for_each_item append_iw_venue_url iw_venue_url
iw_domain_name_conf=
json_for_each_item append_iw_domain_name iw_domain_name
local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
- osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+ osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
+ hs20_t_c_server_url
json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \
- osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp
+ osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \
+ hs20_t_c_server_url
set_default hs20 0
set_default disable_dgaf $hs20
[ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N"
[ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N"
[ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N"
- json_for_each_item append_hs20_conn_capab hs20_conn_capab
+ [ -n "$hs20_t_c_server_url" ] && append bss_conf "hs20_t_c_server_url=$hs20_t_c_server_url" "$N"
json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name
+ json_for_each_item append_hs20_conn_capab hs20_conn_capab
json_for_each_item append_osu_provider osu_provider
json_for_each_item append_operator_icon operator_icon
fi
+ if [ "$eap_server" = "1" ]; then
+ append bss_conf "eap_server=1" "$N"
+ [ -n "$eap_user_file" ] && append bss_conf "eap_user_file=$eap_user_file" "$N"
+ [ -n "$ca_cert" ] && append bss_conf "ca_cert=$ca_cert" "$N"
+ [ -n "$server_cert" ] && append bss_conf "server_cert=$server_cert" "$N"
+ [ -n "$private_key" ] && append bss_conf "private_key=$private_key" "$N"
+ [ -n "$private_key_passwd" ] && append bss_conf "private_key_passwd=$private_key_passwd" "$N"
+ [ -n "$server_id" ] && append bss_conf "server_id=$server_id" "$N"
+ fi
+
+ set_default multicast_to_unicast 0
+ if [ "$multicast_to_unicast" -gt 0 ]; then
+ append bss_conf "multicast_to_unicast=$multicast_to_unicast" "$N"
+ fi
+ set_default proxy_arp 0
+ if [ "$proxy_arp" -gt 0 ]; then
+ append bss_conf "proxy_arp=$proxy_arp" "$N"
+ fi
+
+ set_default per_sta_vif 0
+ if [ "$per_sta_vif" -gt 0 ]; then
+ append bss_conf "per_sta_vif=$per_sta_vif" "$N"
+ fi
+
json_get_values opts hostapd_bss_options
for val in $opts; do
append bss_conf "$val" "$N"
VHT*) append network_data "vht=1" "$N$T";;
esac
case "$htmode" in
- VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
- VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
- VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
+ HE80|VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
+ HE160|VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
+ HE20|HE40|VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";;
*) append network_data "disable_vht=1" "$N$T";;
esac
}
set_default multi_ap 0
local key_mgmt='NONE'
- local enc_str=
local network_data=
local T=" "
;;
esac
+ [ "$wpa_cipher" = GCMP ] && {
+ append network_data "pairwise=GCMP" "$N$T"
+ append network_data "group=GCMP" "$N$T"
+ }
+
[ "$mode" = mesh ] || {
case "$wpa" in
1)
append network_data "mcast_rate=$mc_rate" "$N$T"
}
- if [ "$key_mgnt" = "WPS" ]; then
+ if [ "$key_mgmt" = "WPS" ]; then
echo "wps_cred_processing=1" >> "$_config"
else
cat >> "$_config" <<EOF
_wpa_supplicant_common "$ifname"
ubus wait_for wpa_supplicant
- ubus call wpa_supplicant config_add "{ \
+ local supplicant_res="$(ubus call wpa_supplicant config_add "{ \
\"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
\"iface\": \"$ifname\", \"config\": \"$_config\" \
${network_bridge:+, \"bridge\": \"$network_bridge\"} \
${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
- }"
+ }")"
ret="$?"
- [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
+ [ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
- local supplicant_pid=$(ubus call service list '{"name": "wpad"}' | jsonfilter -l 1 -e "@['wpad'].instances['supplicant'].pid")
- wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1 1
+ wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1
return $ret
}
projects / openwrt / openwrt.git / blobdiff