hostapd: Update to version 2.8 (2019-04-21)

[openwrt/openwrt.git] / package / network / services / hostapd / patches / 013-mesh-do-not-allow-pri-sec-channel-switch.patch

diff --git a/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch b/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch
index 2d818b08357133634890dba15c3194c18eca8407..a09a91d7ebdcbbca5b34cd12af065f2c068d93f8 100644 (file)
--- a/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch
+++ b/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch
@@ -1,27 +1,29 @@
-From 267395271c1a36b54ef21070acff2cadce241035 Mon Sep 17 00:00:00 2001
+From 4f4a9b9e2e61fba334a21dadea749e4b440f42e6 Mon Sep 17 00:00:00 2001
 From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 29 May 2018 14:39:17 -0700
-Subject: [PATCH 13/18] mesh: do not allow pri/sec channel switch
+Date: Mon, 27 Aug 2018 14:28:48 -0700
+Subject: [PATCH 6/7] mesh: don't allow pri/sec channel switch
 
-We don't want mesh to switch the channel from primary to secondary,
-since mesh points are not able to join each other in that case.
+This limitation isn't backed by standard, but it is known that
+mesh doesn't have capability to handle 20/40 coex change in
+current implementation and it will not able to establish
+PLINK when channel switch between primary and secondary happens.
+
+Since it's unknown when we will have the implementation of handling
+20/40 coex change for mesh, it'd better to avoid them from happening
+until standard based implementation is introduced.
 
 Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
 ---
- wpa_supplicant/mesh.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
+ wpa_supplicant/mesh.c | 1 +
+ 1 file changed, 1 insertion(+)
 
 --- a/wpa_supplicant/mesh.c
 +++ b/wpa_supplicant/mesh.c
-@@ -337,7 +337,10 @@ static int wpa_supplicant_mesh_init(stru
-                         rate_len * sizeof(int));
+@@ -385,6 +385,7 @@ static int wpa_supplicant_mesh_init(stru
                conf->basic_rates[rate_len] = -1;
        }
--
-+      /* Do not allow primary/secondary channel switch in mesh mode,
-+        * since mesh is not able to establish a physical link for it
-+        */
-+      conf->no_pri_sec_switch = 1;
-       wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
  
-       if (wpa_drv_init_mesh(wpa_s)) {
++      conf->no_pri_sec_switch = 1;
+       /* Handle pri/sec switch frequency within AP configuration parameter
+        * generation without changing the stored network profile in the end. */
+       saved_freq = ssid->frequency;