hostapd: Update to version 2.8 (2019-04-21)

[openwrt/openwrt.git] / package / network / services / hostapd / patches / 032-mesh-implement-use-of-VHT20-config-in-mesh-mode.patch

diff --git a/package/network/services/hostapd/patches/032-mesh-implement-use-of-VHT20-config-in-mesh-mode.patch b/package/network/services/hostapd/patches/032-mesh-implement-use-of-VHT20-config-in-mesh-mode.patch
deleted file mode 100644 (file)
index 4691a79..0000000
--- a/package/network/services/hostapd/patches/032-mesh-implement-use-of-VHT20-config-in-mesh-mode.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 24fc73b2470ff79cd8c92e029ca785c8e95a204c Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Wed, 18 Apr 2018 14:14:19 -0700
-Subject: [PATCH 2/2] mesh: implement use of VHT20 config in mesh mode
-
-mesh in VHT mode is supposed to be able to use any bandwidth
-that 11ac supports, but we don't have a way to set VHT20
-although there are parameters that are supposed to be used.
-This patch along with the patch of
-"mesh: add VHT_CHANWIDTH_USE_HT to max_oper_chwidth" makes mesh
-available to use of any bandwidth using combination of
-existing parameters like below shown.
-
-VHT80:
-  default
-  do not set any parameters
-VHT40:
-  max_oper_chwidth = 0
-VHT20:
-  max_oper_chwidth=0
-  disable_ht40=1
-HT40:
-  disable_vht = 1
-HT20:
-  disable_ht40 = 1
-disable HT:
-  disable_ht = 1
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/wpa_supplicant.c | 18 +++++++++++++-----
- 1 file changed, 13 insertions(+), 5 deletions(-)
-
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2174,9 +2174,15 @@ void ibss_mesh_setup_freq(struct wpa_sup
-               if (!dfs_enabled)
-                       return;
- 
-+      freq->channel = pri_chan->chan;
-+
- #ifdef CONFIG_HT_OVERRIDES
--      if (ssid->disable_ht40)
--              return;
-+      if (ssid->disable_ht40) {
-+              if (ssid->disable_vht)
-+                      return;
-+              else
-+                      goto skip_ht40;
-+      }
- #endif /* CONFIG_HT_OVERRIDES */
- 
-       /* Check/setup HT40+/HT40- */
-@@ -2204,8 +2210,6 @@ void ibss_mesh_setup_freq(struct wpa_sup
-               if (!dfs_enabled)
-                       return;
- 
--      freq->channel = pri_chan->chan;
--
-       if (ht40 == -1) {
-               if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
-                       return;
-@@ -2249,6 +2253,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
-               wpa_scan_results_free(scan_res);
-       }
- 
-+skip_ht40:
-       wpa_printf(MSG_DEBUG,
-                  "IBSS/mesh: setup freq channel %d, sec_channel_offset %d",
-                  freq->channel, freq->sec_channel_offset);
-@@ -2344,7 +2349,10 @@ void ibss_mesh_setup_freq(struct wpa_sup
-               }
-       } else if (ssid->max_oper_chwidth == VHT_CHANWIDTH_USE_HT) {
-               chwidth = VHT_CHANWIDTH_USE_HT;
--              seg0 = vht80[j] + 2;
-+              if (ssid->disable_ht40)
-+                      seg0 = 0;
-+              else
-+                      seg0 = vht80[j] + 2;
-       }
- 
-       if (hostapd_set_freq_params(&vht_freq, mode->mode, freq->freq,