busybox: update to 1.26.2

[openwrt/openwrt.git] / package / utils / busybox / config / archival / Config.in

diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in
index ff4c2cf6bd0e4727c013b13e36d1870574bd9099..cf47e6591b09e9a0ad35fa395ced6e5273cfaf87 100644 (file)
--- a/package/utils/busybox/config/archival/Config.in
+++ b/package/utils/busybox/config/archival/Config.in
@@ -31,7 +31,7 @@ config BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
          Make tar, rpm, modprobe etc understand .gz data.
 
 config BUSYBOX_CONFIG_FEATURE_SEAMLESS_Z
-       bool "tar, rpm, modprobe etc understand .Z data"
+       bool "Make tar, rpm, modprobe etc understand .Z data"
        default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z  # it is ancient
        help
          Make tar, rpm, modprobe etc understand .Z data.
@@ -79,10 +79,16 @@ config BUSYBOX_CONFIG_GUNZIP
          You can use the `-t' option to test the integrity of
          an archive, without decompressing it.
 
+config BUSYBOX_CONFIG_ZCAT
+       bool "zcat"
+       default BUSYBOX_DEFAULT_ZCAT
+       help
+         Alias to "gunzip -c".
+
 config BUSYBOX_CONFIG_FEATURE_GUNZIP_LONG_OPTIONS
        bool "Enable long options"
        default BUSYBOX_DEFAULT_FEATURE_GUNZIP_LONG_OPTIONS
-       depends on BUSYBOX_CONFIG_GUNZIP && BUSYBOX_CONFIG_LONG_OPTS
+       depends on (BUSYBOX_CONFIG_GUNZIP || BUSYBOX_CONFIG_ZCAT) && BUSYBOX_CONFIG_LONG_OPTS
        help
          Enable use of long options.
 config BUSYBOX_CONFIG_BUNZIP2
@@ -97,6 +103,12 @@ config BUSYBOX_CONFIG_BUNZIP2
 
          Unless you have a specific application which requires bunzip2, you
          should probably say N here.
+
+config BUSYBOX_CONFIG_BZCAT
+       bool "bzcat"
+       default BUSYBOX_DEFAULT_BZCAT
+       help
+         Alias to "bunzip2 -c".
 config BUSYBOX_CONFIG_UNLZMA
        bool "unlzma"
        default BUSYBOX_DEFAULT_UNLZMA
@@ -109,31 +121,47 @@ config BUSYBOX_CONFIG_UNLZMA
          The BusyBox unlzma applet is limited to decompression only.
          On an x86 system, this applet adds about 4K.
 
-config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
-       bool "Optimize unlzma for speed"
-       default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
-       depends on BUSYBOX_CONFIG_UNLZMA
+config BUSYBOX_CONFIG_LZCAT
+       bool "lzcat"
+       default BUSYBOX_DEFAULT_LZCAT
        help
-         This option reduces decompression time by about 25% at the cost of
-         a 1K bigger binary.
+         unlzma is a compression utility using the Lempel-Ziv-Markov chain
+         compression algorithm, and range coding. Compression
+         is generally considerably better than that achieved by the bzip2
+         compressors.
+
+         The BusyBox unlzma applet is limited to decompression only.
+         On an x86 system, this applet adds about 4K.
 
 config BUSYBOX_CONFIG_LZMA
-       bool "Provide lzma alias which supports only unpacking"
+       bool "lzma -d"
        default BUSYBOX_DEFAULT_LZMA
-       depends on BUSYBOX_CONFIG_UNLZMA
        help
          Enable this option if you want commands like "lzma -d" to work.
          IOW: you'll get lzma applet, but it will always require -d option.
+
+config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
+       bool "Optimize unlzma for speed"
+       default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
+       depends on BUSYBOX_CONFIG_UNLZMA || BUSYBOX_CONFIG_LZCAT || BUSYBOX_CONFIG_LZMA
+       help
+         This option reduces decompression time by about 25% at the cost of
+         a 1K bigger binary.
 config BUSYBOX_CONFIG_UNXZ
        bool "unxz"
        default BUSYBOX_DEFAULT_UNXZ
        help
          unxz is a unlzma successor.
 
+config BUSYBOX_CONFIG_XZCAT
+       bool "xzcat"
+       default BUSYBOX_DEFAULT_XZCAT
+       help
+         Alias to "unxz -c".
+
 config BUSYBOX_CONFIG_XZ
-       bool "Provide xz alias which supports only unpacking"
+       bool "xz -d"
        default BUSYBOX_DEFAULT_XZ
-       depends on BUSYBOX_CONFIG_UNXZ
        help
          Enable this option if you want commands like "xz -d" to work.
          IOW: you'll get xz applet, but it will always require -d option.
@@ -158,7 +186,7 @@ config BUSYBOX_CONFIG_CPIO
          cpio has 110 bytes of overheads for every stored file.
 
          This implementation of cpio can extract cpio archives created in the
-         "newc" or "crc" format, it cannot create or modify them.
+         "newc" or "crc" format.
 
          Unless you have a specific application which requires cpio, you
          should probably say N here.
@@ -198,16 +226,6 @@ config BUSYBOX_CONFIG_DPKG_DEB
 
          Unless you have a specific application which requires dpkg-deb,
          say N here.
-
-config BUSYBOX_CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY
-       bool "Extract only (-x)"
-       default BUSYBOX_DEFAULT_FEATURE_DPKG_DEB_EXTRACT_ONLY
-       depends on BUSYBOX_CONFIG_DPKG_DEB
-       help
-         This reduces dpkg-deb to the equivalent of
-         "ar -p <deb> data.tar.gz | tar -zx". However it saves space as none
-         of the extra dpkg-deb, ar or tar options are needed, they are linked
-         to internally.
 config BUSYBOX_CONFIG_GZIP
        bool "gzip"
        default BUSYBOX_DEFAULT_GZIP
@@ -249,10 +267,22 @@ config BUSYBOX_CONFIG_LZOP
        help
          Lzop compression/decompresion.
 
+config BUSYBOX_CONFIG_UNLZOP
+       bool "unlzop"
+       default BUSYBOX_DEFAULT_UNLZOP
+       help
+         Lzop decompresion.
+
+config BUSYBOX_CONFIG_LZOPCAT
+       bool "lzopcat"
+       default BUSYBOX_DEFAULT_LZOPCAT
+       help
+         Alias to "unlzop -c".
+
 config BUSYBOX_CONFIG_LZOP_COMPR_HIGH
        bool "lzop compression levels 7,8,9 (not very useful)"
        default BUSYBOX_DEFAULT_LZOP_COMPR_HIGH
-       depends on BUSYBOX_CONFIG_LZOP
+       depends on BUSYBOX_CONFIG_LZOP || BUSYBOX_CONFIG_UNLZOP || BUSYBOX_CONFIG_LZOPCAT
        help
          High levels (7,8,9) of lzop compression. These levels
          are actually slower than gzip at equivalent compression ratios