strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt/openwrt.git] / target / linux / adm5120-2.6 / files / include / asm-mips / mach-adm5120 / prom / routerboot.h

diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h
deleted file mode 100644 (file)
index 3c0898b..0000000
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik's RouterBOOT definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- */
-
-#ifndef _ROUTERBOOT_H
-#define _ROUTERBOOT_H
-
-#define RB_MAC_SIZE            6
-#define RB_MAX_MAC_COUNT       6
-
-struct rb_bios_settings {
-       u32     hs_offs; /* hard settings offset */
-       u32     hs_size; /* hard settings size */
-       u32     fw_offs; /* firmware offset */
-       u32     ss_offs; /* soft settings offset */
-       u32     ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
-       char    *name;          /* board name */
-       char    *bios_ver;      /* BIOS version */
-       u32     mem_size;       /* memory size in bytes */
-       u32     mac_count;      /* number of mac addresses */
-       u8      macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */
-};
-
-/*
- * Magic numbers
- */
-#define RB_MAGIC_HARD  0x64726148 /* "Hard" */
-#define RB_MAGIC_SOFT  0x74666F53 /* "Soft" */
-#define RB_MAGIC_DAWN  0x6E776144 /* "Dawn" */
-
-#define RB_ID_TERMINATOR       0
-
-/*
- * ID values for Hardware settings
- */
-#define RB_ID_HARD_01          1
-#define RB_ID_HARD_02          2
-#define RB_ID_FLASH_INFO       3
-#define RB_ID_MAC_ADDRESS_PACK 4
-#define RB_ID_BOARD_NAME       5
-#define RB_ID_BIOS_VERSION     6
-#define RB_ID_HARD_07          7
-#define RB_ID_SDRAM_TIMINGS    8
-#define RB_ID_DEVICE_TIMINGS   9
-#define RB_ID_SOFTWARE_ID      10
-#define RB_ID_SERIAL_NUMBER    11
-#define RB_ID_HARD_12          12
-#define RB_ID_MEMORY_SIZE      13
-#define RB_ID_MAC_ADDRESS_COUNT        14
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_UART_SPEED       1
-#define RB_ID_BOOT_DELAY       2
-#define RB_ID_BOOT_DEVICE      3
-#define RB_ID_BOOT_KEY         4
-#define RB_ID_CPU_MODE         5
-#define RB_ID_FW_VERSION       6
-#define RB_ID_SOFT_07          7
-#define RB_ID_SOFT_08          8
-#define RB_ID_BOOT_PROTOCOL    9
-#define RB_ID_SOFT_10          10
-#define RB_ID_SOFT_11          11
-
-/*
- * UART_SPEED values
- */
-#define RB_UART_SPEED_115200   0
-#define RB_UART_SPEED_57600    1
-#define RB_UART_SPEED_38400    2
-#define RB_UART_SPEED_19200    3
-#define RB_UART_SPEED_9600     4
-#define RB_UART_SPEED_4800     5
-#define RB_UART_SPEED_2400     6
-#define RB_UART_SPEED_1200     7
-
-/*
- * BOOT_DELAY values
- */
-#define RB_BOOT_DELAY_0SEC     0
-#define RB_BOOT_DELAY_1SEC     1
-#define RB_BOOT_DELAY_2SEC     2
-
-/*
- * BOOT_DEVICE values
- */
-#define RB_BOOT_DEVICE_ETHER   0
-#define RB_BOOT_DEVICE_NANDETH 1
-#define RB_BOOT_DEVICE_ETHONCE 2
-#define RB_BOOT_DEVICE_NANDONLY        3
-
-/*
- * BOOT_KEY values
- */
-#define RB_BOOT_KEY_ANY                0
-#define RB_BOOT_KEY_DEL                1
-
-/*
- * CPU_MODE values
- */
-#define RB_CPU_MODE_POWERSAVE  0
-#define RB_CPU_MODE_REGULAR    1
-
-/*
- * BOOT_PROTOCOL values
- */
-#define RB_BOOT_PROTOCOL_BOOTP 0
-#define RB_BOOT_PROTOCOL_DHCP  1
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-#endif /* _ROUTERBOOT_H */