+++ /dev/null
-/*
- * D-Link DIR-825 rev. C1 board support
- *
- * Copyright (C) 2013 Alexander Stadler
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DIR825C1_GPIO_LED_BLUE_USB 11
-#define DIR825C1_GPIO_LED_AMBER_POWER 14
-#define DIR825C1_GPIO_LED_BLUE_POWER 22
-#define DIR825C1_GPIO_LED_BLUE_WPS 15
-#define DIR825C1_GPIO_LED_AMBER_PLANET 19
-#define DIR825C1_GPIO_LED_BLUE_PLANET 18
-#define DIR825C1_GPIO_LED_WLAN_2G 13
-
-#define DIR825C1_GPIO_WAN_LED_ENABLE 20
-
-#define DIR825C1_GPIO_BTN_RESET 17
-#define DIR825C1_GPIO_BTN_WPS 16
-
-#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL)
-
-#define DIR825C1_MAC0_OFFSET 0x4
-#define DIR825C1_MAC1_OFFSET 0x18
-#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
-#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dir825c1_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:usb",
- .gpio = DIR825C1_GPIO_LED_BLUE_USB,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:power",
- .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:power",
- .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wps",
- .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:planet",
- .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wlan2g",
- .gpio = DIR825C1_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_led dir835a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:power",
- .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:green:power",
- .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wps",
- .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:planet",
- .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:green:planet",
- .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
- {
- .desc = "Soft reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825C1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825C1_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data dir825c1_ar8327_data = {
- .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &dir825c1_ar8327_led_cfg,
-};
-
-static struct mdio_board_info dir825c1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dir825c1_ar8327_data,
- },
-};
-
-static void __init dir825c1_generic_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
- u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
-
- ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0);
- ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir825c1_gpio_keys),
- dir825c1_gpio_keys);
-
- ath79_init_mac(wmac0, mac0, 0);
- ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
-
- ath79_init_mac(wmac1, mac1, 1);
- ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(dir825c1_mdio0_info,
- ARRAY_SIZE(dir825c1_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- ath79_register_usb();
-}
-
-static void __init dir825c1_setup(void)
-{
- ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
- AR934X_GPIO_OUT_GPIO);
-
- gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE,
- GPIOF_OUT_INIT_LOW, "WAN LED enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
- dir825c1_leds_gpio);
-
- ap9x_pci_setup_wmac_led_pin(0, 0);
-
- dir825c1_generic_setup();
-}
-
-static void __init dir835a1_setup(void)
-{
- dir825c1_ar8327_data.led_cfg = NULL;
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio),
- dir835a1_leds_gpio);
-
- dir825c1_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
- "D-Link DIR-825 rev. C1",
- dir825c1_setup);
-
-MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1",
- "D-Link DIR-835 rev. A1",
- dir835a1_setup);
projects / openwrt / openwrt.git / blobdiff