+++ /dev/null
-/*
- * GLI AR300M(D) board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/pci.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define GL_AR300M_GPIO_LED_WLAN 14
-#define GL_AR300M_GPIO_LED_LAN 13
-#define GL_AR300M_GPIO_LED_SYSTEM 12
-#define GL_AR300M_GPIO_BTN_RESET 3
-#define GL_AR300M_GPIO_BTN_LEFT 0
-#define GL_AR300M_GPIO_BTN_RIGHT 1
-
-#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL)
-
-#define GL_AR300M_MAC0_OFFSET 0
-#define GL_AR300M_MAC1_OFFSET 6
-#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000
-#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
- {
- .name = "gl-ar300m:red:wlan",
- .gpio = GL_AR300M_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:green:lan",
- .gpio = GL_AR300M_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:green:system",
- .gpio = GL_AR300M_GPIO_LED_SYSTEM,
- .active_low = 1,
- .default_state = 1,
- },
-};
-
-static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "button right",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_LEFT,
- .active_low = 0,
- },
- {
- .desc = "button left",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RIGHT,
- .active_low = 0,
- },
-};
-
-static struct spi_board_info gl_ar300m_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = NULL,
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "ath79-spinand",
- .platform_data = NULL,
- }
-};
-
-static struct ath79_spi_platform_data gl_ar300m_spi_data = {
- .bus_num = 0,
- .num_chipselect = 2,
-};
-
-static void __init gl_ar300m_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
- ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
- gl_ar300m_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar300m_gpio_keys),
- gl_ar300m_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
- ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
-
- /* enable usb */
- ath79_register_usb();
- /* enable pci */
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL.iNet GL-AR300M", gl_ar300m_setup);
projects / openwrt / openwrt.git / blobdiff