ar71xx: drop target
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-om5p.c
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
deleted file mode 100644 (file)
index 61ff6a7..0000000
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- *  OpenMesh OM5P support
- *
- *  Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- *  Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OM5P_GPIO_LED_POWER    13
-#define OM5P_GPIO_LED_GREEN    16
-#define OM5P_GPIO_LED_RED      19
-#define OM5P_GPIO_LED_YELLOW   17
-#define OM5P_GPIO_LED_LAN      14
-#define OM5P_GPIO_LED_WAN      15
-#define OM5P_GPIO_BTN_RESET    4
-#define OM5P_GPIO_I2C_SCL      20
-#define OM5P_GPIO_I2C_SDA      21
-
-#define OM5P_KEYS_POLL_INTERVAL                20      /* msecs */
-#define OM5P_KEYS_DEBOUNCE_INTERVAL    (3 * OM5P_KEYS_POLL_INTERVAL)
-
-#define OM5P_WMAC_CALDATA_OFFSET       0x1000
-#define OM5P_PCI_CALDATA_OFFSET                0x5000
-
-static struct gpio_led om5p_leds_gpio[] __initdata = {
-       {
-               .name           = "om5p:blue:power",
-               .gpio           = OM5P_GPIO_LED_POWER,
-               .active_low     = 1,
-       }, {
-               .name           = "om5p:red:wifi",
-               .gpio           = OM5P_GPIO_LED_RED,
-               .active_low     = 1,
-       }, {
-               .name           = "om5p:yellow:wifi",
-               .gpio           = OM5P_GPIO_LED_YELLOW,
-               .active_low     = 1,
-       }, {
-               .name           = "om5p:green:wifi",
-               .gpio           = OM5P_GPIO_LED_GREEN,
-               .active_low     = 1,
-       }, {
-               .name           = "om5p:blue:lan",
-               .gpio           = OM5P_GPIO_LED_LAN,
-               .active_low     = 1,
-       }, {
-               .name           = "om5p:blue:wan",
-               .gpio           = OM5P_GPIO_LED_WAN,
-               .active_low     = 1,
-       }
-};
-
-static struct gpio_keys_button om5p_gpio_keys[] __initdata = {
-       {
-               .desc           = "reset",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = OM5P_GPIO_BTN_RESET,
-               .active_low     = 1,
-       }
-};
-
-static struct flash_platform_data om5p_flash_data = {
-       .type = "mx25l12805d",
-};
-
-static void __init om5p_setup(void)
-{
-       u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-       u8 mac[6];
-
-       /* make lan / wan leds software controllable */
-       ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
-       ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
-       ath79_register_m25p80(&om5p_flash_data);
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
-                                om5p_leds_gpio);
-       ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL,
-                                       ARRAY_SIZE(om5p_gpio_keys),
-                                       om5p_gpio_keys);
-
-       ath79_init_mac(mac, art, 2);
-       ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
-       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-       ath79_register_mdio(1, 0x0);
-
-       ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
-       ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
-
-       /* GMAC0 is connected to the PHY0 of the internal switch */
-       ath79_switch_data.phy4_mii_en = 1;
-       ath79_switch_data.phy_poll_mask = BIT(0);
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-       ath79_eth0_data.phy_mask = BIT(0);
-       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-       ath79_register_eth(0);
-
-       /* GMAC1 is connected to the internal switch */
-       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-       ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup);
-
-static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = {
-       .sda_pin                = OM5P_GPIO_I2C_SDA,
-       .scl_pin                = OM5P_GPIO_I2C_SCL,
-       .udelay                 = 10,
-       .sda_is_open_drain      = 1,
-       .scl_is_open_drain      = 1,
-};
-
-static struct platform_device om5pan_i2c_device = {
-       .name           = "i2c-gpio",
-       .id             = 0,
-       .dev            = {
-               .platform_data  = &om5pan_i2c_device_platdata,
-       },
-};
-
-static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
-       {
-               I2C_BOARD_INFO("tmp423", 0x4c),
-       },
-};
-
-static struct at803x_platform_data om5p_an_at803x_data = {
-       .disable_smarteee = 1,
-       .enable_rgmii_rx_delay = 1,
-       .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info om5p_an_mdio0_info[] = {
-       {
-               .bus_id = "ag71xx-mdio.0",
-               .mdio_addr = 7,
-               .platform_data = &om5p_an_at803x_data,
-       },
-};
-
-static void __init om5p_an_setup(void)
-{
-       u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-       u8 mac[6];
-
-       /* temperature sensor */
-       platform_device_register(&om5pan_i2c_device);
-       i2c_register_board_info(0, om5pan_i2c_devs,
-                               ARRAY_SIZE(om5pan_i2c_devs));
-
-       /* make lan / wan leds software controllable */
-       ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
-       ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
-       ath79_register_m25p80(&om5p_flash_data);
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
-                                om5p_leds_gpio);
-
-       ath79_init_mac(mac, art, 0x02);
-       ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
-       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-       ath79_setup_ar934x_eth_rx_delay(2, 2);
-       ath79_register_mdio(0, 0x0);
-       ath79_register_mdio(1, 0x0);
-
-       mdiobus_register_board_info(om5p_an_mdio0_info,
-                                   ARRAY_SIZE(om5p_an_mdio0_info));
-
-       ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
-       ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
-       /* GMAC0 is connected to the PHY7 */
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-       ath79_eth0_data.phy_mask = BIT(7);
-       ath79_eth0_pll_data.pll_1000 = 0x02000000;
-       ath79_eth0_pll_data.pll_100 = 0x00000101;
-       ath79_eth0_pll_data.pll_10 = 0x00001313;
-       ath79_register_eth(0);
-
-       /* GMAC1 is connected to the internal switch */
-       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-       ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
-       ath79_register_eth(1);
-
-       ath79_init_mac(mac, art, 0x10);
-       ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup);