ar71xx: drop target

[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-tl-wr1041n-v2.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
deleted file mode 100644 (file)
index c98dd4f..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  TP-LINK TL-WR1041 v2 board support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1041NV2_GPIO_BTN_RESET    14
-#define TL_WR1041NV2_GPIO_LED_WPS      13
-#define TL_WR1041NV2_GPIO_LED_WLAN     11
-
-#define TL_WR1041NV2_GPIO_LED_SYSTEM   12
-
-#define TL_WR1041NV2_KEYS_POLL_INTERVAL                20      /* msecs */
-#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL    (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
-
-#define TL_WR1041NV2_PCIE_CALDATA_OFFSET       0x5000
-
-static const char *tl_wr1041nv2_part_probes[] = {
-       "tp-link",
-       NULL,
-};
-
-static struct flash_platform_data tl_wr1041nv2_flash_data = {
-       .part_probes    = tl_wr1041nv2_part_probes,
-};
-
-static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
-       {
-               .name           = "tp-link:green:system",
-               .gpio           = TL_WR1041NV2_GPIO_LED_SYSTEM,
-               .active_low     = 1,
-       }, {
-               .name           = "tp-link:green:wps",
-               .gpio           = TL_WR1041NV2_GPIO_LED_WPS,
-               .active_low     = 1,
-       }, {
-               .name           = "tp-link:green:wlan",
-               .gpio           = TL_WR1041NV2_GPIO_LED_WLAN,
-               .active_low     = 1,
-       }
-};
-
-static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
-       {
-               .desc           = "reset",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = TL_WR1041NV2_GPIO_BTN_RESET,
-               .active_low     = 1,
-       }
-};
-
-static const struct ar8327_led_info tl_wr1041n_leds_ar8327[] = {
-       AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
-       AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
-       AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
-       AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
-       AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
-};
-
-static struct ar8327_led_cfg wr1041n_v2_ar8327_led_cfg = {
-       .led_ctrl0 = 0xcf35cf35,        /* LED0: blink at 10/100/1000M */
-       .led_ctrl1 = 0xcf35cf35,        /* LED1: blink at 10/100/1000M: anyway, no LED1 on tl-wr1041n */
-       .led_ctrl2 = 0xcf35cf35,        /* LED2: blink at 10/100/1000M: anyway, no LED2 on tl-wr1041n */
-       .led_ctrl3 = 0x03ffff00,        /* Pattern enabled for LED 0-2 of port 1-3 */
-       .open_drain = true,
-};
-
-static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-       .mode = AR8327_PAD_MAC_RGMII,
-       .txclk_delay_en = true,
-       .rxclk_delay_en = true,
-       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data db120_ar8327_data = {
-       .pad0_cfg = &db120_ar8327_pad0_cfg,
-       .port0_cfg = {
-               .force_link = 1,
-               .speed = AR8327_PORT_SPEED_1000,
-               .duplex = 1,
-               .txpause = 1,
-               .rxpause = 1,
-       },
-       .led_cfg = &wr1041n_v2_ar8327_led_cfg,
-       .num_leds = ARRAY_SIZE(tl_wr1041n_leds_ar8327),
-       .leds = tl_wr1041n_leds_ar8327
-};
-
-static struct mdio_board_info db120_mdio0_info[] = {
-       {
-               .bus_id = "ag71xx-mdio.0",
-               .mdio_addr = 0,
-               .platform_data = &db120_ar8327_data,
-       },
-};
-
-static void __init tl_wr1041nv2_setup(void)
-{
-       u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-       ath79_register_m25p80(&tl_wr1041nv2_flash_data);
-
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
-                                tl_wr1041nv2_leds_gpio);
-       ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
-                                        ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
-                                        tl_wr1041nv2_gpio_keys);
-       ath79_register_wmac(ee, mac);
-
-       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-                                  AR934X_ETH_CFG_SW_ONLY_MODE);
-
-       ath79_register_mdio(1, 0x0);
-       ath79_register_mdio(0, 0x0);
-
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
-       mdiobus_register_board_info(db120_mdio0_info,
-                                   ARRAY_SIZE(db120_mdio0_info));
-
-       /* GMAC0 is connected to an AR8327 switch */
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ath79_eth0_data.phy_mask = BIT(0);
-       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-       ath79_eth0_pll_data.pll_1000 = 0x06000000;
-       ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
-            "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);