at91: upgrade to kernel 3.8.7 and use devicetree

[openwrt/openwrt.git] / target / linux / at91 / files / arch / arm / boot / dts / lmu5000.dts

diff --git a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
new file mode 100644 (file)
index 0000000..671f452
--- /dev/null
+++ b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
@@ -0,0 +1,125 @@
+/*
+ * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+       model = "CalAmp LMU5000";
+       compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+       chosen {
+               bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+       };
+
+       memory {
+               reg = <0x20000000 0x4000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <18432000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               board {
+                                       pinctrl_pck0_as_mck: pck0_as_mck {
+                                               atmel,pins =
+                                                       <2 1 0x2 0x0>;  /* PC1 periph B */
+                                       };
+
+                               };
+                       };
+
+                       dbgu: serial@fffff200 {
+                               status = "okay";
+                       };
+
+                       usart0: serial@fffb0000 {
+                               pinctrl-0 =
+                                       <&pinctrl_usart0
+                                        &pinctrl_usart0_rts
+                                        &pinctrl_usart0_cts
+                                        &pinctrl_usart0_dtr_dsr
+                                        &pinctrl_usart0_dcd
+                                        &pinctrl_usart0_ri>;
+                               status = "okay";
+                       };
+
+                       usart2: serial@fffb8000 {
+                               status = "okay";
+                       };
+
+                       uart0: serial@fffd4000 {
+                               status = "okay";
+                       };
+
+                       uart1: serial@fffd8000 {
+                               status = "okay";
+                       };
+
+                       macb0: ethernet@fffc4000 {
+                               phy-mode = "mii";
+                               status = "okay";
+                       };
+
+                       usb1: gadget@fffa4000 {
+                               atmel,vbus-gpio = <&pioC 5 0>;
+                               status = "okay";
+                       };
+
+                       ssc0: ssc@fffbc000 {
+                               status = "okay";
+                               pinctrl-0 = <&pinctrl_ssc0_tx>;
+                       };
+
+                       watchdog@fffffd40 {
+                               status = "okay";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "soft";
+                       nand-on-flash-bbt;
+                       status = "okay";
+
+                       kernel@0 {
+                               label = "kernel";
+                               reg = <0x0 0x400000>;
+                       };
+
+                       rootfs@400000 {
+                               label = "rootfs";
+                               reg = <0x400000 0x3C00000>;
+                       };
+
+                       user1@4000000 {
+                               label = "user1";
+                               reg = <0x4000000 0x2000000>;
+                       };
+
+                       user2@6000000 {
+                               label = "user2";
+                               reg = <0x6000000 0x2000000>;
+                       };
+               };
+
+               usb0: ohci@00500000 {
+                       num-ports = <2>;
+                       status = "okay";
+               };
+       };
+};