at91: kernel: bump to 5.10
[openwrt/openwrt.git] / target / linux / at91 / files / arch / arm / boot / dts / wb45n.dts
diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts b/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
deleted file mode 100644 (file)
index fd9d260..0000000
+++ /dev/null
@@ -1,220 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wb45n.dts - Device Tree file for WB45NBT board
- *
- *  Copyright (C) 2015 Laird
- */
-
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
-       model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
-       compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
-
-       chosen {
-               bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-       };
-
-       memory {
-               reg = <0x20000000 0x4000000>;
-       };
-
-       clocks {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               main_clock: clock@0 {
-                       compatible = "atmel,osc", "fixed-clock";
-                       clock-frequency = <12000000>;
-               };
-
-               slow_xtal {
-                       clock-frequency = <32768>;
-               };
-
-               main_xtal {
-                       clock-frequency = <12000000>;
-               };
-       };
-
-       ahb {
-               apb {
-
-                       rstc@fffffe00 {
-                               compatible = "atmel,sama5d3-rstc";
-                       };
-
-                       pinctrl@fffff400 {
-                               nand {
-                                       pinctrl_nand: nand-0 {
-                                               atmel,pins =
-                                                       <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A Read Enable */
-                                                        AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A Write Enable */
-                                                        AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD2 periph A Address Latch Enable */
-                                                        AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A Command Latch Enable */
-                                                        AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD4 gpio Chip Enable pin pull_up */
-                                                        AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;  /* PD5 gpio RDY/BUSY pin pull_up */
-                                       };
-                               };
-
-                               usb2 {
-                                       pinctrl_board_usb2: usb2-board {
-                                               atmel,pins =
-                                                       <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;          /* PB11 gpio vbus sense, deglitch */
-                                       };
-                               };
-                       };
-
-                       dbgu: serial@fffff200 {
-                               status = "okay";
-                       };
-
-                       usart0: serial@f801c000 {
-                               status = "okay";
-                       };
-
-                       usart3: serial@f8028000 {
-                               status = "okay";
-                       };
-
-                       spi0: spi@f0000000 {
-                               status = "okay";
-                               cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
-                       };
-
-                       mmc0: mmc@f0008000 {
-                               pinctrl-0 = <
-                                       &pinctrl_mmc0_slot0_clk_cmd_dat0
-                                       &pinctrl_mmc0_slot0_dat1_3>;
-                               status = "okay";
-                               /delete-property/dmas;
-                               /delete-property/dma-names;
-                               slot@0 {
-                                       reg = <0>;
-                                       bus-width = <4>;
-                               };
-                       };
-
-                       macb0: ethernet@f802c000 {
-                               phy-mode = "rmii";
-                               status = "okay";
-                       };
-
-                       usb2: gadget@f803c000 {
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&pinctrl_board_usb2>;
-                               atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
-                               status = "okay";
-                       };
-
-                       i2c1: i2c@f8014000 {
-                               status = "okay";
-                       };
-
-                       watchdog@fffffe40 {
-                               status = "okay";
-                       };
-
-                       shdwc@fffffe10 {
-                               atmel,wakeup-mode = "low";
-                       };
-
-                       rtc@fffffeb0 {
-                               status = "okay";
-                       };
-               };
-
-               usb0: ohci@00600000 {
-                       status = "okay";
-                       num-ports = <2>;
-                       atmel,vbus-gpio = <
-                                          &pioB 12 GPIO_ACTIVE_HIGH
-                                          &pioA 31 GPIO_ACTIVE_HIGH
-                                         >;
-                       atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
-               };
-
-               usb1: ehci@00700000 {
-                       status = "okay";
-               };
-
-               nand0: nand@40000000 {
-                       nand-bus-width = <8>;
-                       nand-ecc-mode = "hw";
-                       atmel,has-pmecc;        /* Enable PMECC */
-                       atmel,pmecc-cap = <4>;
-                       atmel,pmecc-sector-size = <512>;
-                       nand-on-flash-bbt;
-                       status = "okay";
-
-                       at91bootstrap@0 {
-                               label = "at91bs";
-                               reg = <0x0 0x20000>;
-                       };
-
-                       uboot@20000 {
-                               label = "u-boot";
-                               reg = <0x20000 0x80000>;
-                       };
-
-                       ubootenv@a0000 {
-                               label = "u-boot-env";
-                               reg = <0xa0000 0x20000>;
-                       };
-
-                       ubootenv@c0000 {
-                               label = "redund-env";
-                               reg = <0xc0000 0x20000>;
-                       };
-
-                       kernel-a@e0000 {
-                               label = "kernel-a";
-                               reg = <0xe0000 0x280000>;
-                       };
-
-                       kernel-b@360000 {
-                               label = "kernel-b";
-                               reg = <0x360000 0x280000>;
-                       };
-
-                       rootfs-a@5e0000 {
-                               label = "rootfs-a";
-                               reg = <0x5e0000 0x2600000>;
-                       };
-
-                       rootfs-b@2be0000 {
-                               label = "rootfs-b";
-                               reg = <0x2be0000 0x2600000>;
-                       };
-
-                       user@51e0000 {
-                               label = "user";
-                               reg = <0x51e0000 0x2dc0000>;
-                       };
-
-                       logs@7fa0000 {
-                               label = "logs";
-                               reg = <0x7fa0000 0x60000>;
-                       };
-               };
-       };
-
-       atheros {
-               compatible = "atheros,ath6kl";
-               atheros,board-id = "SD32";
-       };
-
-       keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               irqbtn@pb18 {
-                       label = "IRQBTN";
-                       linux,code = <99>;
-                       gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-                       gpio-key,wakeup = <1>;
-               };
-       };
-};