ath25: drop 4.9 kernel support
[openwrt/openwrt.git] / target / linux / ath25 / patches-4.9 / 330-board_leds.patch
diff --git a/target/linux/ath25/patches-4.9/330-board_leds.patch b/target/linux/ath25/patches-4.9/330-board_leds.patch
deleted file mode 100644 (file)
index e357fc6..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -23,6 +23,7 @@
- #include <linux/reboot.h>
- #include <linux/delay.h>
- #include <linux/gpio.h>
-+#include <linux/leds.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -260,6 +261,50 @@ static struct platform_device ar2315_spi
-       .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
- };
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+      .leds = (void *)ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+      .name = "leds-gpio",
-+      .id = -1,
-+      .dev = {
-+              .platform_data = (void *)&ar2315_led_data,
-+      }
-+};
-+
-+static void __init ar2315_init_gpio_leds(void)
-+{
-+      static char led_names[6][6];
-+      int i, led = 0;
-+
-+      ar2315_led_data.num_leds = 0;
-+      for (i = 1; i < 8; i++) {
-+              if ((i == AR2315_RESET_GPIO) ||
-+                  (i == ath25_board.config->reset_config_gpio))
-+                      continue;
-+
-+              if (i == ath25_board.config->sys_led_gpio)
-+                      strcpy(led_names[led], "wlan");
-+              else
-+                      sprintf(led_names[led], "gpio%d", i);
-+
-+              ar2315_leds[led].name = led_names[led];
-+              ar2315_leds[led].gpio = i;
-+              ar2315_leds[led].active_low = 0;
-+              led++;
-+      }
-+      ar2315_led_data.num_leds = led;
-+      platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio_leds(void)
-+{
-+}
-+#endif
-+
- void __init ar2315_init_devices(void)
- {
-       /* Find board configuration */
-@@ -270,6 +315,8 @@ void __init ar2315_init_devices(void)
-       ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
-       platform_device_register(&ar2315_gpio);
-+      ar2315_init_gpio_leds();
-+
-       ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
-                                                    AR2315_MISC_IRQ_WATCHDOG);
-       ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
---- a/arch/mips/ath25/ar5312.c
-+++ b/arch/mips/ath25/ar5312.c
-@@ -23,6 +23,7 @@
- #include <linux/mtd/physmap.h>
- #include <linux/reboot.h>
- #include <linux/gpio.h>
-+#include <linux/leds.h>
- #include <asm/bootinfo.h>
- #include <asm/reboot.h>
- #include <asm/time.h>
-@@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi
-       .num_resources = ARRAY_SIZE(ar5312_gpio_res),
- };
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+      { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+      .num_leds = ARRAY_SIZE(ar5312_leds),
-+      .leds = (void *)ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+      .name = "leds-gpio",
-+      .id = -1,
-+      .dev.platform_data = (void *)&ar5312_led_data,
-+};
-+#endif
-+
- static void __init ar5312_flash_init(void)
- {
-       void __iomem *flashctl_base;
-@@ -301,6 +319,11 @@ void __init ar5312_init_devices(void)
-       platform_device_register(&ar5312_gpio);
-+#ifdef CONFIG_LEDS_GPIO
-+      ar5312_leds[0].gpio = config->sys_led_gpio;
-+      platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-       /* Fix up MAC addresses if necessary */
-       if (is_broadcast_ether_addr(config->enet0_mac))
-               ether_addr_copy(config->enet0_mac, config->enet1_mac);