ath79: add new OF only target for QCA MIPS silicon

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar7241_ubnt-unifi.dts

diff --git a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts b/target/linux/ath79/dts/ar7241_ubnt-unifi.dts
new file mode 100644 (file)
index 0000000..c1829cb
--- /dev/null
+++ b/target/linux/ath79/dts/ar7241_ubnt-unifi.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7241.dtsi"
+
+/ {
+       compatible = "ubnt,unifi", "qca,ar7241";
+       model = "Ubiquiti UniFi AP";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       extosc: ref {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <40000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               poll-interval = <20>;
+               button@0 {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led@0 {
+                       label = "ubnt:green:dome";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+               };
+
+               led@1 {
+                       label = "ubnt:orange:dome";
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&pll {
+       clocks = <&extosc>;
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "mx25l6405d";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x000000 0x040000>;
+               };
+
+               partition@1 {
+                       label = "u-boot-env";
+                       reg = <0x040000 0x010000>;
+               };
+
+               partition@2 {
+                       label = "firmware";
+                       reg = <0x050000 0x750000>;
+               };
+
+               partition@3 {
+                       label = "board_config";
+                       reg = <0x7a0000 0x010000>;
+                       read-only;
+               };
+
+               partition@4 {
+                       label = "cfg";
+                       reg = <0x7b0000 0x040000>;
+                       read-only;
+               };
+
+               art: partition@5 {
+                       label = "art";
+                       reg = <0x7f0000 0x010000>;
+                       read-only;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k@0000 {
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+               phy-mode = "mii";
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       mtd-mac-address = <&art 0x0>;
+       phy-handle = <&phy4>;
+};
+
+&eth1 {
+       status = "okay";
+
+       compatible = "syscon";
+};