ath79: Create common DTSI for EAP600 and ECB600
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_engenius_exx600.dtsi
diff --git a/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi b/target/linux/ath79/dts/ar9344_engenius_exx600.dtsi
new file mode 100644 (file)
index 0000000..5ae2ea6
--- /dev/null
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       aliases {
+               label-mac-device = &eth0;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               serial0 = &uart;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       ath9k-leds {
+               compatible = "gpio-leds";
+
+               wifi2g {
+                       label = "blue:wifi2g";
+                       gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       virtual_flash {
+               compatible = "mtd-concat";
+
+               devices = <&fwconcat0 &fwconcat1>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               compatible = "openwrt,okli";
+                               label = "firmware";
+                               reg = <0x0 0x0>;
+                       };
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <40000000>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@50000 {
+                               label = "custom";
+                               reg = <0x050000 0x050000>;
+                               read-only;
+                       };
+
+                       partition@a0000 {
+                               label = "loader";
+                               reg = <0x0a0000 0x010000>;
+                               read-only;
+                       };
+
+                       fwconcat1: partition@b0000 {
+                               label = "fwconcat1";
+                               reg = <0x0b0000 0x170000>;
+                       };
+
+                       partition@220000 {
+                               label = "fakeroot";
+                               reg = <0x220000 0x010000>;
+                               read-only;
+                       };
+
+                       fwconcat0: partition@230000 {
+                               label = "fwconcat0";
+                               reg = <0x230000 0xbc0000>;
+                       };
+
+                       partition@df0000 {
+                               label = "failsafe";
+                               reg = <0xdf0000 0x200000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               eee-broken-100tx;
+               eee-broken-1000t;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&phy0>;
+       phy-mode = "rgmii-id";
+
+       pll-data = <0x02000000 0x00000101 0x00001313>;
+
+       gmac-config {
+               device = <&gmac>;
+               rgmii-gmac0 = <1>;
+               rxdv-delay = <3>;
+               rxd-delay = <3>;
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@0,0,0 {
+               compatible = "pci168c,0030";
+               reg = <0x0 0 0 0 0>;
+               qca,disable-5ghz;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       qca,disable-2ghz;
+
+       mtd-cal-data = <&art 0x1000>;
+};