ath79: add support for OCEDO Raccoon

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_ocedo_raccoon.dts

diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
new file mode 100644 (file)
index 0000000..a98f251
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+       model = "OCEDO Raccoon";
+       compatible = "ocedo,raccoon", "qca,ar9344";
+
+       aliases {
+               led-status = &system;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "raccoon:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "raccoon:yellow:wlan24";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               system: system {
+                       label = "raccoon:blue:sys";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       ath9k-leds {
+               compatible = "gpio-leds";
+
+               wlan5g {
+                       label = "raccoon:red:wlan5";
+                       gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&ref {
+       clock-frequency = <40000000>;
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&spi {
+       num-cs = <1>;
+
+       status = "okay";
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x050000 0x740000>;
+                       };
+
+                       partition@790000 {
+                               label = "vendor";
+                               reg = <0x790000 0x740000>;
+                               read-only;
+                       };
+
+                       partition@ed0000 {
+                               label = "data";
+                               reg = <0xed0000 0x110000>;
+                               read-only;
+                       };
+
+                       partition@fe0000 {
+                               label = "id";
+                               reg = <0xfe0000 0x010000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@168c,0030 {
+               compatible = "pci168c,0030";
+               reg = <0x0000 0 0 0 0>;
+               mtd-mac-address = <&art 0xc>;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x6>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0>;
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               phy-mode = "rgmii";
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       /* default for ar934x, except for 1000M */
+       pll-data = <0x06000000 0x00000101 0x00001616>;
+
+       mtd-mac-address = <&art 0x0>;
+
+       phy-mode = "rgmii";
+       phy-handle = <&phy0>;
+};