ath79: add support for COMFAST CF-E313AC

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9531_comfast_cf-e313ac.dts

diff --git a/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts b/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts
new file mode 100644 (file)
index 0000000..b29dc17
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+       compatible = "comfast,cf-e313ac", "qca,qca9531";
+       model = "COMFAST CF-E313AC";
+
+       aliases {
+               serial0 = &uart;
+               led-boot = &rssihigh;
+               led-failsafe = &rssihigh;
+               led-upgrade = &rssihigh;
+               label-mac-device = &eth1;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+
+               wlan {
+                       label = "cf-e313ac:green:wlan";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               lan {
+                       label = "cf-e313ac:green:lan";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "cf-e313ac:green:wan";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               rssilow {
+                       label = "cf-e313ac:red:rssilow";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+
+               rssimediumlow {
+                       label = "cf-e313ac:red:rssimediumlow";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               rssimediumhigh {
+                       label = "cf-e313ac:green:rssimediumhigh";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               rssihigh: rssihigh {
+                       label = "cf-e313ac:green:rssihigh";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x010000>;
+                               read-only;
+                       };
+
+                       art: partition@10000 {
+                               label = "art";
+                               reg = <0x010000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x020000 0x7c0000>;
+                       };
+
+                       partition@7e0000 {
+                               label = "config";
+                               reg = <0x7e0000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@7f0000 {
+                               label = "nvram";
+                               reg = <0x7f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+       phy-handle = <&swphy0>;
+       mtd-mac-address = <&art 0x1002>;
+
+       gmac-config {
+               device = <&gmac>;
+               switch-phy-swap = <1>;
+       };
+};
+
+&eth1 {
+       status = "okay";
+       mtd-mac-address = <&art 0x0>;
+};
+
+&pcie0 {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0 0 0 0 0>;
+       };
+};