-/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
- button0 {
+ reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
- button1 {
+ right {
label = "button right";
linux,code = <BTN_0>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
- button3 {
+ left {
label = "button left";
linux,code = <BTN_1>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
leds {
compatible = "gpio-leds";
- // Colors from non-Lite versions
+ // Colors for non-Lite versions
led_status: status {
label = "gl-ar300m:green:status";
linux,default-trigger = "phy0tpt";
};
};
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ };
};
&pcie0 {
&spi {
status = "okay";
- num-cs = <0>;
+
+ num-cs = <2>;
flash@0 {
- compatible = "winbond,w25q128", "jedec,spi-nor";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
read-only;
};
- partition@1 {
+ partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
- partition@2 {
- compatible = "denx,uimage";
- label = "firmware";
+ nor_firmware: partition@50000 {
+ label = "nor_firmware";
reg = <0x050000 0xfa0000>;
};
- art: partition@3 {
+ art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
+
+ nand_flash: flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand_kernel: partition@0 {
+ label = "nand_kernel";
+ reg = <0x000000 0x400000>;
+ };
+
+ nand_ubi: partition@400000 {
+ label = "nand_ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
};
&uart {
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x1002>;
};