ath79: enable UART in SoC DTSI files

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9533_tplink_tl-wr842n-v3.dts

diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
index 64be0744b2830eda0ed5d73eb7d9c3b24f82539e..db99f70b36d59afd41f3daa12be7f9979e1c346a 100644 (file)
--- a/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
@@ -1,74 +1,74 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca953x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca953x.dtsi"
-
 / {
        compatible = "tplink,tl-wr842n-v3", "qca,qca9533";
        model = "TP-Link TL-WR842N v3";
 
        aliases {
-               led-boot = &qss_led;
-               led-failsafe = &qss_led;
-               led-running = &qss_led;
-               led-upgrade = &qss_led;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &eth1;
        };
 
-       gpio_leds: leds {
+       leds {
                compatible = "gpio-leds";
 
-               system: power {
-                       label = "tp-link:green:power";
+               led_power: power {
+                       label = "green:power";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                wifi {
-                       label = "tp-link:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
-               qss_led: qss {
-                       label = "tp-link:green:qss";
+               qss {
+                       label = "green:qss";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
 
                wan_green {
-                       label = "tp-link:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
                wan_red {
-                       label = "tp-link:red:wan";
+                       label = "red:wan";
                        gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "tp-link:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "usbport";
                        trigger-sources = <&hub_port>;
@@ -94,10 +94,6 @@
        };
 };
 
-&uart {
-       status = "okay";
-};
-
 &usb0 {
        #address-cells = <1>;
        #size-cells = <0>;
@@ -110,12 +106,11 @@
 };
 
 &usb_phy {
-        status = "okay";
+       status = "okay";
 };
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
@@ -140,7 +135,7 @@
                        };
 
                        art: partition@ff0000 {
-                               label = "ART";
+                               label = "art";
                                reg = <0xff0000 0x010000>;
                                read-only;
                        };
@@ -148,21 +143,22 @@
        };
 };
 
-&eth1 {
-       mtd-mac-address = <&uboot 0x1fc00>;
-};
-
 &eth0 {
        status = "okay";
+
        phy-handle = <&swphy4>;
 
        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <1>;
 };
 
+&eth1 {
+       mtd-mac-address = <&uboot 0x1fc00>;
+};
+
 &wmac {
        status = "okay";
+
        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&uboot 0x1fc00>;
 };
-