ath79: add support for 8devices Rambutan board

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9557_8dev_rambutan.dts

diff --git a/target/linux/ath79/dts/qca9557_8dev_rambutan.dts b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
new file mode 100644 (file)
index 0000000..cf1c00c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca955x.dtsi"
+
+/ {
+       compatible = "8dev,rambutan", "qca,qca9557";
+       model = "8devices Rambutan";
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partitions {
+               compatible = "fixed-partitions";
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x300000>;
+                       read-only;
+               };
+
+               partition@300000 {
+                       label = "u-boot-env";
+                       reg = <0x300000 0x200000>;
+               };
+
+               art: partition@500000 {
+                       label = "art";
+                       reg = <0x500000 0x100000>;
+                       read-only;
+               };
+
+               partition@600000 {
+                       label = "ubi";
+                       reg = <0x600000 0x7a00000>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&mdio1 {
+       status = "okay";
+
+       phy1: ethernet-phy@0 {
+               reg = <0>;
+               reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+               phy-mode = "sgmii";
+               at803x-override-sgmii-link-check;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       mtd-mac-address = <&art 0x0>;
+       phy-mode = "mii";
+       phy-handle = <&phy0>;
+};
+
+&eth1 {
+       status = "okay";
+
+       pll-data = <0x17000000 0x101 0x1313>;
+       phy-handle = <&phy1>;
+       phy-mode = "sgmii";
+       qca955x-sgmii-fixup;
+       mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+       status = "okay";
+
+       gpio-controller;
+       mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+};
+
+&uart {
+       status = "okay";
+};