ath79: rename dts/image using manufacturer_board scheme

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9558_tl-archer-c7.dtsi

diff --git a/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi b/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
deleted file mode 100644 (file)
index 6fb25a9..0000000
--- a/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9557.dtsi"
-
-/ {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-status = &system;
-       };
-
-       gpio_leds: leds {
-               compatible = "gpio-leds";
-
-               system: system {
-                       label = "tp-link:green:system";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               usb1 {
-                       label = "tp-link:green:usb1";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       trigger-sources = <&hub_port1>;
-                       linux,default-trigger = "usbport";
-               };
-
-               usb2 {
-                       label = "tp-link:green:usb2";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       trigger-sources = <&hub_port0>;
-                       linux,default-trigger = "usbport";
-               };
-
-               led_wlan2g: wlan2g {
-                       label = "tp-link:green:wlan2g";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               qss {
-                       label = "tp-link:green:qss";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-       };
-
-       gpio_keys: keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               gpio_usb1_power {
-                       gpio-export,name = "tp-link:power:usb1";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio_usb2_power {
-                       gpio-export,name = "tp-link:power:usb2";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-               };
-
-       };
-};
-
-&pcie1 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-
-       hub_port0: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&usb_phy1 {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-
-       hub_port1: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               mtdparts: partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-                       0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-                       0x50 0xc737c737 /* LED_CTRL0 */
-                       0x54 0x00000000 /* LED_CTRL1 */
-                       0x58 0x00000000 /* LED_CTRL2 */
-                       0x5c 0x0030c300 /* LED_CTRL3 */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-                       0x94 0x0000007e /* PORT6 STATUS */
-                       >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <1>;
-       phy-handle = <&phy0>;
-
-       gmac-config {
-               device = <&gmac>;
-               rgmii-enabled = <1>;
-       };
-};
-
-&eth1 {
-       status = "okay";
-
-       mtd-mac-address = <&uboot 0x1fc00>;
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
-};