ath79: add support for Trendnet TEW-823DRU

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9558_trendnet_tew-823dru.dts

diff --git a/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts b/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
new file mode 100644 (file)
index 0000000..ca9847f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+       compatible = "trendnet,tew-823dru", "qca,qca9558";
+       model = "TRENDNET TEW-823DRU";
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       aliases {
+               led-boot = &system;
+               led-failsafe = &system;
+               led-running = &system;
+               led-upgrade = &system;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_orange {
+                       label = "trendnet:orange:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               system: power_green {
+                       label = "trendnet:green:power";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+
+               planet_green {
+                       label = "trendnet:green:planet";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+               };
+
+               planet_orange {
+                       label = "trendnet:orange:planet";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "WPS button";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&pcie1 {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&gpio {
+       status = "okay";
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port0: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb_phy1 {
+       status = "okay";
+};
+
+&usb1 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port1: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot:  partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "nvram";
+                               reg = <0x030000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x040000 0xef0000>;
+                       };
+
+                       partition@f30000 {
+                               label = "lang";
+                               reg = <0xf30000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@f60000 {
+                               label = "my-dlink";
+                               reg = <0xf60000 0x080000>;
+                               read-only;
+                       };
+
+                       mac: partition@fe0000 {
+                               label = "mac";
+                               reg = <0xfe0000 0x010000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+               qca,ar8327-initvals = <
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+                       0x10 0x81000080 /* POWER_ON_STRIP */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+                       0x94 0x0000007e /* PORT6 STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&phy0>;
+       pll-data = <0x56000000 0x00000101 0x00001616>;
+
+       gmac-config {
+               device = <&gmac>;
+               rgmii-enabled = <1>;
+       };
+};
+
+&eth1 {
+       status = "okay";
+
+       pll-data = <0x03000101 0x00000101 0x00001616>;
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+};