ath79: Add support for OpenMesh OM2P v1

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 10-ath9k-eeprom

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 2e520ac0678f5dc390d019edc1366ba529ea5b99..31b872e618f8dbac12238d90aee32a65b954b435 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,16 +12,15 @@ case "$FIRMWARE" in
        8dev,lima)
                caldata_extract "art" 0x1000 0x800
                ;;
+       asus,rp-ac66)
+               caldata_extract "art" 0x1000 0x440
+               ;;
        avm,fritz1750e|\
        avm,fritz4020|\
        avm,fritz450e|\
        avm,fritzdvbc)
                caldata_extract_reverse "urlader" 0x1541 0x440
                ;;
-       dlink,dap-2695-a1)
-               caldata_extract "art" 0x1000 0x440
-               ath9k_patch_mac $(mtd_get_mac_ascii bdcfg "wlanmac")
-               ;;
        dlink,dir-505|\
        dlink,dir-825-c1|\
        dlink,dir-835-a1)
@@ -32,7 +31,9 @@ case "$FIRMWARE" in
        dlink,dir-842-c2|\
        dlink,dir-842-c3|\
        dlink,dir-859-a1|\
+       nec,wf1200cr|\
        nec,wg1200cr|\
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
@@ -40,7 +41,7 @@ case "$FIRMWARE" in
        engenius,ecb1200|\
        engenius,ecb1750)
                caldata_extract "art" 0x1000 0x440
-               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) +1)
+               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) 1)
                ;;
        engenius,epg5000|\
        iodata,wn-ac1167dgr|\
@@ -56,9 +57,6 @@ case "$FIRMWARE" in
                caldata_extract "calibrate" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
                ;;
-       meraki,mr12)
-               caldata_extract "art" 0x11000 0xeb8
-               ;;
        nec,wg800hp)
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
@@ -74,6 +72,21 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:00.0.bin")
        case $board in
+       atheros,db120|\
+       engenius,eap600|\
+       engenius,ecb600|\
+       mercury,mw4530r-v1|\
+       ocedo,raccoon|\
+       tplink,tl-wdr3500-v1|\
+       tplink,tl-wdr3600-v1|\
+       tplink,tl-wdr4300-v1|\
+       tplink,tl-wdr4300-v1-il|\
+       tplink,tl-wdr4310-v1|\
+       tplink,tl-wdr4900-v2|\
+       ubnt,unifi-ap-pro|\
+       winchannel,wb2000)
+               caldata_extract "art" 0x5000 0x440
+               ;;
        avm,fritz300e)
                caldata_extract_reverse "urloader" 0x1541 0x440
                ;;
@@ -90,24 +103,13 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x440
                ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
                ;;
-       engenius,eap600|\
-       engenius,ecb600|\
-       mercury,mw4530r-v1|\
-       ocedo,raccoon|\
-       tplink,tl-wdr3500-v1|\
-       tplink,tl-wdr3600-v1|\
-       tplink,tl-wdr4300-v1|\
-       tplink,tl-wdr4300-v1-il|\
-       tplink,tl-wdr4310-v1|\
-       tplink,tl-wdr4900-v2|\
-       ubnt,unifi-ap-pro|\
-       winchannel,wb2000)
-               caldata_extract "art" 0x5000 0x440
-               ;;
        enterasys,ws-ap3705i)
                caldata_extract "calibrate" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
                ;;
+       meraki,mr12)
+               caldata_extract "art" 0x11000 0xeb8
+               ;;
        netgear,wnr2200-8m|\
        netgear,wnr2200-16m|\
        pcs,cap324|\
@@ -125,9 +127,14 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x1000 0x1000
                ;;
        openmesh,mr600-v1|\
-       openmesh,mr600-v2)
+       openmesh,mr600-v2|\
+       openmesh,om5p-an)
                caldata_extract "ART" 0x5000 0x440
                ;;
+       openmesh,om2p-v1)
+               caldata_extract "ART" 0x1000 0x440
+               ;;
+       wd,mynet-n600|\
        wd,mynet-n750)
                caldata_extract "art" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -144,13 +151,7 @@ case "$FIRMWARE" in
 "ath9k-eeprom-pci-0000:00:11.0.bin")
        case $board in
        buffalo,wzr-600dhp|\
-       buffalo,wzr-hp-ag300h|\
-       netgear,wndr3700|\
-       netgear,wndr3700-v2|\
-       netgear,wndr3800|\
-       netgear,wndr3800ch|\
-       netgear,wndrmac-v1|\
-       netgear,wndrmac-v2)
+       buffalo,wzr-hp-ag300h)
                caldata_extract "art" 0x1000 0xeb8
                ;;
        dlink,dir-825-b1)
@@ -168,13 +169,7 @@ case "$FIRMWARE" in
 "ath9k-eeprom-pci-0000:00:12.0.bin")
        case $board in
        buffalo,wzr-600dhp|\
-       buffalo,wzr-hp-ag300h|\
-       netgear,wndr3700|\
-       netgear,wndr3700-v2|\
-       netgear,wndr3800|\
-       netgear,wndr3800ch|\
-       netgear,wndrmac-v1|\
-       netgear,wndrmac-v2)
+       buffalo,wzr-hp-ag300h)
                caldata_extract "art" 0x5000 0xeb8
                ;;
        dlink,dir-825-b1)