ath79: remove obsolete 5.15 kernel support

[openwrt/openwrt.git] / target / linux / ath79 / patches-5.15 / 332-ath79-sgmii-config.patch

diff --git a/target/linux/ath79/patches-5.15/332-ath79-sgmii-config.patch b/target/linux/ath79/patches-5.15/332-ath79-sgmii-config.patch
deleted file mode 100644 (file)
index a6a50e4..0000000
--- a/target/linux/ath79/patches-5.15/332-ath79-sgmii-config.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: David Bauer <mail@david-bauer.net>
-Subject: [PATCH] ath79: force SGMII SerDes mode to MAC operation
-
-The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default.
-This only allows for 1000 Mbit/s links, however when used with an SGMII
-PHY in 100 Mbit/s link mode, the link remains dead.
-
-This strictly has nothing to do with the SerDes calibration, however it
-is done at the same point in the QCA reference U-Boot which is the
-blueprint for everything happening here. As the current state is more or
-less a hack, this should be fine.
-
-This fixes the issues outlined above on a TP-Link EAP-225 Outdoor.
-
-Reported-by: Tom Herbers <freifunk@tomherbers.de>
-Tested-by: Tom Herbers <freifunk@tomherbers.de>
-Submitted-by: David Bauer <mail@david-bauer.net>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h           | 1 +
- 1 files changed, 1 insertion(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1380,5 +1380,6 @@
- 
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT  0
- #define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK   0x7
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC      0x2
- 
- #endif /* __ASM_MACH_AR71XX_REGS_H */