bcm53xx: drop linux 4.4 and 4.9 support

[openwrt/openwrt.git] / target / linux / bcm53xx / patches-4.4 / 301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch

diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644 (file)
index c780e22..0000000
--- a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
-       bcm4709-buffalo-wxr-1900dhp.dtb \
-       bcm4709-linksys-ea9200.dtb \
-       bcm4709-netgear-r7000.dtb \
-+      bcm4709-netgear-r7900.dtb \
-       bcm4709-netgear-r8000.dtb \
-       bcm4709-tplink-archer-c9-v1.dtb \
-       bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+      compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+      model = "Netgear R7900";
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200";
-+      };
-+
-+      memory {
-+              reg = <0x00000000 0x08000000
-+                     0x88000000 0x08000000>;
-+      };
-+
-+      axi@18000000 {
-+              usb3@23000 {
-+                      reg = <0x00023000 0x1000>;
-+
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+};
-+
-+&uart0 {
-+      status = "okay";
-+};