bcm53xx: drop linux 4.4 and 4.9 support

[openwrt/openwrt.git] / target / linux / bcm53xx / patches-4.9 / 130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch

diff --git a/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch b/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
deleted file mode 100644 (file)
index cd691f7..0000000
--- a/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From c830b958f52fc666919439d6f8f6caa8b6844d44 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 7 Mar 2018 20:33:56 +0900
-Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
-dts and cannot configure these LEDs.
-I Added missing LED definitions for WZR-900DHP.
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -35,6 +35,74 @@
-                      0x88000000 0x08000000>;
-       };
- 
-+      spi {
-+              compatible = "spi-gpio";
-+              num-chipselects = <1>;
-+              gpio-sck = <&chipcommon 7 0>;
-+              gpio-mosi = <&chipcommon 4 0>;
-+              cs-gpios = <&chipcommon 6 0>;
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+
-+              hc595: gpio_spi@0 {
-+                      compatible = "fairchild,74hc595";
-+                      reg = <0>;
-+                      registers-number = <1>;
-+                      spi-max-frequency = <100000>;
-+
-+                      gpio-controller;
-+                      #gpio-cells = <2>;
-+
-+              };
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+
-+              usb {
-+                      label = "bcm53xx:green:usb";
-+                      gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              power0 {
-+                      label = "bcm53xx:green:power";
-+                      gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "default-on";
-+              };
-+
-+              power1 {
-+                      label = "bcm53xx:red:power";
-+                      gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              router0 {
-+                      label = "bcm53xx:green:router";
-+                      gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "default-on";
-+              };
-+
-+              router1 {
-+                      label = "bcm53xx:amber:router";
-+                      gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              wan {
-+                      label = "bcm53xx:green:wan";
-+                      gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "default-on";
-+              };
-+
-+              wireless0 {
-+                      label = "bcm53xx:green:wireless";
-+                      gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              wireless1 {
-+                      label = "bcm53xx:amber:wireless";
-+                      gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-       gpio-keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;