add preinit modularization work by Daniel Dickinson (cshore)

[openwrt/openwrt.git] / target / linux / brcm-2.4 / base-files / etc / preinit.arch

diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch
deleted file mode 100755 (executable)
index e62360e..0000000
--- a/target/linux/brcm-2.4/base-files/etc/preinit.arch
+++ /dev/null
@@ -1,71 +0,0 @@
-. /etc/functions.sh
-
-failsafe() {
-       lock /tmp/.failsafe
-       failsafe_ip
-
-       echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-       
-       set_state failsafe
-       [ -x "/usr/sbin/nvram" ] && {
-               [ "$(nvram get boot_wait)" != "on" ] && {
-                       nvram set boot_wait=on
-                       nvram commit
-               }
-       }
-
-       netmsg 192.168.1.255 "Entering Failsafe!"
-       telnetd -l /bin/login.sh <> /dev/null 2>&1
-
-       ash --login
-}
-
-mount none /proc -t proc
-
-insmod diag
-set_state preinit
-echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
-
-ifname=eth0
-
-# hardware specific overrides
-case "$(cat /proc/diag/model)" in
-       "Linksys WAP54G V1") ifname=eth1;;
-       "ASUS WL-HDD") ifname=eth1;;
-       "ASUS WL-300g") ifname=eth1;;
-       "ASUS (unknown, BCM4702)") ifname=eth1;;
-       "Sitecom WL-105b") ifname=eth1;;
-esac
-
-check_module () {
-  module="$1"; shift; params="$*"
-
-  insmod "$module" "$params"
-  sleep 1
-  grep "^$module" /proc/modules
-  return $?
-}
-
-check_module tg3
-failsafe_ip
-
-insmod switch-core
-check_module switch-robo || check_module switch-adm  || { 
-  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
-} || rmmod switch-core
-
-[ -d /proc/switch/eth0 ] && {
-       echo 1 > /proc/switch/eth0/reset
-
-       # this would be easier if we blasted the message across all ports
-       # but we don't want packets leaking across interfaces
-       for port in $(seq 0 4); do {
-               echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-               netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-       }; done
-} || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
-
-ifconfig $ifname 0.0.0.0 down
-
-sleep 2
-