+++ /dev/null
-From 9d6e36d79fe6515b1392ad1a4e4d4aca72bc770e Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Sun, 12 May 2013 12:24:19 +0100
-Subject: [PATCH 001/222] Main bcm2708/bcm2709 linux port
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- arch/arm/Kconfig | 39 ++
- arch/arm/Kconfig.debug | 8 +
- arch/arm/Makefile | 2 +
- arch/arm/kernel/head.S | 8 +
- arch/arm/kernel/process.c | 10 +
- arch/arm/mach-bcm2708/Kconfig | 30 +
- arch/arm/mach-bcm2708/Makefile | 5 +
- arch/arm/mach-bcm2708/Makefile.boot | 3 +
- arch/arm/mach-bcm2708/armctrl.c | 304 +++++++++
- arch/arm/mach-bcm2708/armctrl.h | 27 +
- arch/arm/mach-bcm2708/bcm2708.c | 622 ++++++++++++++++++
- arch/arm/mach-bcm2708/bcm2708.h | 49 ++
- arch/arm/mach-bcm2708/include/mach/arm_control.h | 419 ++++++++++++
- arch/arm/mach-bcm2708/include/mach/clkdev.h | 7 +
- arch/arm/mach-bcm2708/include/mach/debug-macro.S | 22 +
- arch/arm/mach-bcm2708/include/mach/entry-macro.S | 69 ++
- arch/arm/mach-bcm2708/include/mach/frc.h | 38 ++
- arch/arm/mach-bcm2708/include/mach/hardware.h | 28 +
- arch/arm/mach-bcm2708/include/mach/io.h | 27 +
- arch/arm/mach-bcm2708/include/mach/irqs.h | 196 ++++++
- arch/arm/mach-bcm2708/include/mach/memory.h | 57 ++
- arch/arm/mach-bcm2708/include/mach/platform.h | 228 +++++++
- arch/arm/mach-bcm2708/include/mach/system.h | 38 ++
- arch/arm/mach-bcm2708/include/mach/timex.h | 23 +
- arch/arm/mach-bcm2708/include/mach/uncompress.h | 84 +++
- arch/arm/mach-bcm2708/include/mach/vmalloc.h | 20 +
- arch/arm/mach-bcm2709/Kconfig | 42 ++
- arch/arm/mach-bcm2709/Makefile | 6 +
- arch/arm/mach-bcm2709/Makefile.boot | 3 +
- arch/arm/mach-bcm2709/armctrl.c | 361 ++++++++++
- arch/arm/mach-bcm2709/armctrl.h | 27 +
- arch/arm/mach-bcm2709/bcm2708_gpio.c | 426 ++++++++++++
- arch/arm/mach-bcm2709/bcm2709.c | 801 +++++++++++++++++++++++
- arch/arm/mach-bcm2709/bcm2709.h | 49 ++
- arch/arm/mach-bcm2709/delay.S | 21 +
- arch/arm/mach-bcm2709/include/mach/arm_control.h | 493 ++++++++++++++
- arch/arm/mach-bcm2709/include/mach/barriers.h | 3 +
- arch/arm/mach-bcm2709/include/mach/clkdev.h | 7 +
- arch/arm/mach-bcm2709/include/mach/debug-macro.S | 22 +
- arch/arm/mach-bcm2709/include/mach/entry-macro.S | 123 ++++
- arch/arm/mach-bcm2709/include/mach/frc.h | 38 ++
- arch/arm/mach-bcm2709/include/mach/gpio.h | 17 +
- arch/arm/mach-bcm2709/include/mach/hardware.h | 28 +
- arch/arm/mach-bcm2709/include/mach/io.h | 27 +
- arch/arm/mach-bcm2709/include/mach/irqs.h | 225 +++++++
- arch/arm/mach-bcm2709/include/mach/memory.h | 57 ++
- arch/arm/mach-bcm2709/include/mach/platform.h | 225 +++++++
- arch/arm/mach-bcm2709/include/mach/system.h | 38 ++
- arch/arm/mach-bcm2709/include/mach/timex.h | 23 +
- arch/arm/mach-bcm2709/include/mach/uncompress.h | 84 +++
- arch/arm/mach-bcm2709/include/mach/vc_mem.h | 35 +
- arch/arm/mach-bcm2709/include/mach/vc_support.h | 69 ++
- arch/arm/mach-bcm2709/include/mach/vmalloc.h | 20 +
- arch/arm/mach-bcm2709/vc_mem.c | 431 ++++++++++++
- arch/arm/mach-bcm2709/vc_support.c | 318 +++++++++
- arch/arm/mm/Kconfig | 2 +-
- arch/arm/mm/proc-v6.S | 15 +-
- arch/arm/mm/proc-v7.S | 1 +
- arch/arm/tools/mach-types | 2 +
- drivers/clocksource/arm_arch_timer.c | 36 +
- drivers/tty/serial/amba-pl011.c | 2 +-
- include/linux/mmc/host.h | 1 +
- 62 files changed, 6436 insertions(+), 5 deletions(-)
- create mode 100644 arch/arm/mach-bcm2708/Kconfig
- create mode 100644 arch/arm/mach-bcm2708/Makefile
- create mode 100644 arch/arm/mach-bcm2708/Makefile.boot
- create mode 100644 arch/arm/mach-bcm2708/armctrl.c
- create mode 100644 arch/arm/mach-bcm2708/armctrl.h
- create mode 100644 arch/arm/mach-bcm2708/bcm2708.c
- create mode 100644 arch/arm/mach-bcm2708/bcm2708.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/arm_control.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/clkdev.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/debug-macro.S
- create mode 100644 arch/arm/mach-bcm2708/include/mach/entry-macro.S
- create mode 100644 arch/arm/mach-bcm2708/include/mach/frc.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/hardware.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/io.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/irqs.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/memory.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/platform.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/system.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/timex.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/uncompress.h
- create mode 100644 arch/arm/mach-bcm2708/include/mach/vmalloc.h
- create mode 100644 arch/arm/mach-bcm2709/Kconfig
- create mode 100644 arch/arm/mach-bcm2709/Makefile
- create mode 100644 arch/arm/mach-bcm2709/Makefile.boot
- create mode 100644 arch/arm/mach-bcm2709/armctrl.c
- create mode 100644 arch/arm/mach-bcm2709/armctrl.h
- create mode 100644 arch/arm/mach-bcm2709/bcm2708_gpio.c
- create mode 100644 arch/arm/mach-bcm2709/bcm2709.c
- create mode 100644 arch/arm/mach-bcm2709/bcm2709.h
- create mode 100644 arch/arm/mach-bcm2709/delay.S
- create mode 100644 arch/arm/mach-bcm2709/include/mach/arm_control.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/barriers.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/clkdev.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/debug-macro.S
- create mode 100644 arch/arm/mach-bcm2709/include/mach/entry-macro.S
- create mode 100644 arch/arm/mach-bcm2709/include/mach/frc.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/gpio.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/hardware.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/io.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/irqs.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/memory.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/platform.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/system.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/timex.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/uncompress.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/vc_mem.h
- create mode 100755 arch/arm/mach-bcm2709/include/mach/vc_support.h
- create mode 100644 arch/arm/mach-bcm2709/include/mach/vmalloc.h
- create mode 100644 arch/arm/mach-bcm2709/vc_mem.c
- create mode 100644 arch/arm/mach-bcm2709/vc_support.c
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -314,6 +314,42 @@ choice
- default ARCH_VERSATILE if !MMU
- default ARCH_MULTIPLATFORM if MMU
-
-+config ARCH_BCM2708
-+ bool "Broadcom BCM2708 family"
-+ select CPU_V6
-+ select ARM_AMBA
-+ select HAVE_SCHED_CLOCK
-+ select NEED_MACH_GPIO_H
-+ select NEED_MACH_MEMORY_H
-+ select COMMON_CLK
-+ select ARCH_HAS_CPUFREQ
-+ select GENERIC_CLOCKEVENTS
-+ select ARM_ERRATA_411920
-+ select MACH_BCM2708
-+ select VC4
-+ select FIQ
-+ help
-+ This enables support for Broadcom BCM2708 boards.
-+
-+config ARCH_BCM2709
-+ bool "Broadcom BCM2709 family"
-+ select ARCH_HAS_BARRIERS if SMP
-+ select CPU_V7
-+ select HAVE_SMP
-+ select ARM_AMBA
-+ select MIGHT_HAVE_CACHE_L2X0
-+ select HAVE_SCHED_CLOCK
-+ select NEED_MACH_MEMORY_H
-+ select NEED_MACH_IO_H
-+ select COMMON_CLK
-+ select ARCH_HAS_CPUFREQ
-+ select GENERIC_CLOCKEVENTS
-+ select MACH_BCM2709
-+ select VC4
-+ select FIQ
-+ help
-+ This enables support for Broadcom BCM2709 boards.
-+
- config ARCH_MULTIPLATFORM
- bool "Allow multiple platforms to be selected"
- depends on MMU
-@@ -824,6 +860,9 @@ config ARCH_VIRT
- # Kconfigs may be included either alphabetically (according to the
- # plat- suffix) or along side the corresponding mach-* source.
- #
-+source "arch/arm/mach-bcm2708/Kconfig"
-+source "arch/arm/mach-bcm2709/Kconfig"
-+
- source "arch/arm/mach-mvebu/Kconfig"
-
- source "arch/arm/mach-alpine/Kconfig"
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -1197,6 +1197,14 @@ choice
- options; the platform specific options are deprecated
- and will be soon removed.
-
-+ config DEBUG_BCM2708_UART0
-+ bool "Broadcom BCM2708 UART0 (PL011)"
-+ depends on MACH_BCM2708
-+ help
-+ Say Y here if you want the debug print routines to direct
-+ their output to UART 0. The port must have been initialised
-+ by the boot-loader before use.
-+
- endchoice
-
- config DEBUG_AT91_UART
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -155,6 +155,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080
-
- # Machine directory name. This list is sorted alphanumerically
- # by CONFIG_* macro name.
-+machine-$(CONFIG_ARCH_BCM2708) += bcm2708
-+machine-$(CONFIG_ARCH_BCM2709) += bcm2709
- machine-$(CONFIG_ARCH_ALPINE) += alpine
- machine-$(CONFIG_ARCH_AT91) += at91
- machine-$(CONFIG_ARCH_AXXIA) += axxia
---- a/arch/arm/kernel/head.S
-+++ b/arch/arm/kernel/head.S
-@@ -680,6 +680,14 @@ ARM_BE8(rev16 ip, ip)
- ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 1b
- ret lr
-+ nop
-+ nop
-+ nop
-+ nop
-+ nop
-+ nop
-+ nop
-+ nop
- #endif
- ENDPROC(__fixup_a_pv_table)
-
---- a/arch/arm/kernel/process.c
-+++ b/arch/arm/kernel/process.c
-@@ -98,6 +98,16 @@ void arch_cpu_idle_dead(void)
- }
- #endif
-
-+char bcm2708_reboot_mode = 'h';
-+
-+int __init reboot_setup(char *str)
-+{
-+ bcm2708_reboot_mode = str[0];
-+ return 1;
-+}
-+
-+__setup("reboot=", reboot_setup);
-+
- void __show_regs(struct pt_regs *regs)
- {
- unsigned long flags;
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/Kconfig
-@@ -0,0 +1,30 @@
-+menu "Broadcom BCM2708 Implementations"
-+ depends on ARCH_BCM2708
-+
-+config MACH_BCM2708
-+ bool "Broadcom BCM2708 Development Platform"
-+ select NEED_MACH_MEMORY_H
-+ select NEED_MACH_IO_H
-+ select CPU_V6
-+ help
-+ Include support for the Broadcom(R) BCM2708 platform.
-+
-+config BCM2708_DT
-+ bool "BCM2708 Device Tree support"
-+ depends on MACH_BCM2708
-+ default n
-+ select USE_OF
-+ select ARCH_REQUIRE_GPIOLIB
-+ select PINCTRL
-+ select PINCTRL_BCM2835
-+ help
-+ Enable Device Tree support for BCM2708
-+
-+config BCM2708_NOL2CACHE
-+ bool "Videocore L2 cache disable"
-+ depends on MACH_BCM2708
-+ default n
-+ help
-+ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
-+
-+endmenu
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+obj-$(CONFIG_MACH_BCM2708) += bcm2708.o armctrl.o
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/Makefile.boot
-@@ -0,0 +1,3 @@
-+ zreladdr-y := 0x00008000
-+params_phys-y := 0x00000100
-+initrd_phys-y := 0x00800000
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/armctrl.c
-@@ -0,0 +1,304 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/armctrl.c
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/io.h>
-+#include <linux/version.h>
-+#include <linux/syscore_ops.h>
-+#include <linux/interrupt.h>
-+#include <linux/irqdomain.h>
-+#include <linux/of.h>
-+
-+#include <asm/mach/irq.h>
-+#include <mach/hardware.h>
-+#include "armctrl.h"
-+
-+/* For support of kernels >= 3.0 assume only one VIC for now*/
-+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = {
-+ INTERRUPT_VC_JPEG,
-+ INTERRUPT_VC_USB,
-+ INTERRUPT_VC_3D,
-+ INTERRUPT_VC_DMA2,
-+ INTERRUPT_VC_DMA3,
-+ INTERRUPT_VC_I2C,
-+ INTERRUPT_VC_SPI,
-+ INTERRUPT_VC_I2SPCM,
-+ INTERRUPT_VC_SDIO,
-+ INTERRUPT_VC_UART,
-+ INTERRUPT_VC_ARASANSDIO
-+};
-+
-+static void armctrl_mask_irq(struct irq_data *d)
-+{
-+ static const unsigned int disables[4] = {
-+ ARM_IRQ_DIBL1,
-+ ARM_IRQ_DIBL2,
-+ ARM_IRQ_DIBL3,
-+ 0
-+ };
-+
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
-+ writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3]));
-+}
-+
-+static void armctrl_unmask_irq(struct irq_data *d)
-+{
-+ static const unsigned int enables[4] = {
-+ ARM_IRQ_ENBL1,
-+ ARM_IRQ_ENBL2,
-+ ARM_IRQ_ENBL3,
-+ 0
-+ };
-+
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
-+ writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3]));
-+}
-+
-+#ifdef CONFIG_OF
-+
-+#define NR_IRQS_BANK0 21
-+#define NR_BANKS 3
-+#define IRQS_PER_BANK 32
-+
-+/* from drivers/irqchip/irq-bcm2835.c */
-+static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
-+ const u32 *intspec, unsigned int intsize,
-+ unsigned long *out_hwirq, unsigned int *out_type)
-+{
-+ if (WARN_ON(intsize != 2))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[0] >= NR_BANKS))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
-+ return -EINVAL;
-+
-+ if (intspec[0] == 0)
-+ *out_hwirq = ARM_IRQ0_BASE + intspec[1];
-+ else if (intspec[0] == 1)
-+ *out_hwirq = ARM_IRQ1_BASE + intspec[1];
-+ else
-+ *out_hwirq = ARM_IRQ2_BASE + intspec[1];
-+
-+ /* reverse remap_irqs[] */
-+ switch (*out_hwirq) {
-+ case INTERRUPT_VC_JPEG:
-+ *out_hwirq = INTERRUPT_JPEG;
-+ break;
-+ case INTERRUPT_VC_USB:
-+ *out_hwirq = INTERRUPT_USB;
-+ break;
-+ case INTERRUPT_VC_3D:
-+ *out_hwirq = INTERRUPT_3D;
-+ break;
-+ case INTERRUPT_VC_DMA2:
-+ *out_hwirq = INTERRUPT_DMA2;
-+ break;
-+ case INTERRUPT_VC_DMA3:
-+ *out_hwirq = INTERRUPT_DMA3;
-+ break;
-+ case INTERRUPT_VC_I2C:
-+ *out_hwirq = INTERRUPT_I2C;
-+ break;
-+ case INTERRUPT_VC_SPI:
-+ *out_hwirq = INTERRUPT_SPI;
-+ break;
-+ case INTERRUPT_VC_I2SPCM:
-+ *out_hwirq = INTERRUPT_I2SPCM;
-+ break;
-+ case INTERRUPT_VC_SDIO:
-+ *out_hwirq = INTERRUPT_SDIO;
-+ break;
-+ case INTERRUPT_VC_UART:
-+ *out_hwirq = INTERRUPT_UART;
-+ break;
-+ case INTERRUPT_VC_ARASANSDIO:
-+ *out_hwirq = INTERRUPT_ARASANSDIO;
-+ break;
-+ }
-+
-+ *out_type = IRQ_TYPE_NONE;
-+ return 0;
-+}
-+
-+static struct irq_domain_ops armctrl_ops = {
-+ .xlate = armctrl_xlate
-+};
-+
-+void __init armctrl_dt_init(void)
-+{
-+ struct device_node *np;
-+ struct irq_domain *domain;
-+
-+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2708-armctrl-ic");
-+ if (!np)
-+ return;
-+
-+ domain = irq_domain_add_legacy(np, BCM2708_ALLOC_IRQS,
-+ IRQ_ARMCTRL_START, 0,
-+ &armctrl_ops, NULL);
-+ WARN_ON(!domain);
-+}
-+#else
-+void __init armctrl_dt_init(void) { }
-+#endif /* CONFIG_OF */
-+
-+#if defined(CONFIG_PM)
-+
-+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */
-+
-+/* Static defines
-+ * struct armctrl_device - VIC PM device (< 3.xx)
-+ * @sysdev: The system device which is registered. (< 3.xx)
-+ * @irq: The IRQ number for the base of the VIC.
-+ * @base: The register base for the VIC.
-+ * @resume_sources: A bitmask of interrupts for resume.
-+ * @resume_irqs: The IRQs enabled for resume.
-+ * @int_select: Save for VIC_INT_SELECT.
-+ * @int_enable: Save for VIC_INT_ENABLE.
-+ * @soft_int: Save for VIC_INT_SOFT.
-+ * @protect: Save for VIC_PROTECT.
-+ */
-+struct armctrl_info {
-+ void __iomem *base;
-+ int irq;
-+ u32 resume_sources;
-+ u32 resume_irqs;
-+ u32 int_select;
-+ u32 int_enable;
-+ u32 soft_int;
-+ u32 protect;
-+} armctrl;
-+
-+static int armctrl_suspend(void)
-+{
-+ return 0;
-+}
-+
-+static void armctrl_resume(void)
-+{
-+ return;
-+}
-+
-+/**
-+ * armctrl_pm_register - Register a VIC for later power management control
-+ * @base: The base address of the VIC.
-+ * @irq: The base IRQ for the VIC.
-+ * @resume_sources: bitmask of interrupts allowed for resume sources.
-+ *
-+ * For older kernels (< 3.xx) do -
-+ * Register the VIC with the system device tree so that it can be notified
-+ * of suspend and resume requests and ensure that the correct actions are
-+ * taken to re-instate the settings on resume.
-+ */
-+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq,
-+ u32 resume_sources)
-+{
-+ armctrl.base = base;
-+ armctrl.resume_sources = resume_sources;
-+ armctrl.irq = irq;
-+}
-+
-+static int armctrl_set_wake(struct irq_data *d, unsigned int on)
-+{
-+ unsigned int off = d->irq & 31;
-+ u32 bit = 1 << off;
-+
-+ if (!(bit & armctrl.resume_sources))
-+ return -EINVAL;
-+
-+ if (on)
-+ armctrl.resume_irqs |= bit;
-+ else
-+ armctrl.resume_irqs &= ~bit;
-+
-+ return 0;
-+}
-+
-+#else
-+static inline void armctrl_pm_register(void __iomem * base, unsigned int irq,
-+ u32 arg1)
-+{
-+}
-+
-+#define armctrl_suspend NULL
-+#define armctrl_resume NULL
-+#define armctrl_set_wake NULL
-+#endif /* CONFIG_PM */
-+
-+static struct syscore_ops armctrl_syscore_ops = {
-+ .suspend = armctrl_suspend,
-+ .resume = armctrl_resume,
-+};
-+
-+/**
-+ * armctrl_syscore_init - initicall to register VIC pm functions
-+ *
-+ * This is called via late_initcall() to register
-+ * the resources for the VICs due to the early
-+ * nature of the VIC's registration.
-+*/
-+static int __init armctrl_syscore_init(void)
-+{
-+ register_syscore_ops(&armctrl_syscore_ops);
-+ return 0;
-+}
-+
-+late_initcall(armctrl_syscore_init);
-+
-+static struct irq_chip armctrl_chip = {
-+ .name = "ARMCTRL",
-+ .irq_ack = NULL,
-+ .irq_mask = armctrl_mask_irq,
-+ .irq_unmask = armctrl_unmask_irq,
-+ .irq_set_wake = armctrl_set_wake,
-+};
-+
-+/**
-+ * armctrl_init - initialise a vectored interrupt controller
-+ * @base: iomem base address
-+ * @irq_start: starting interrupt number, must be muliple of 32
-+ * @armctrl_sources: bitmask of interrupt sources to allow
-+ * @resume_sources: bitmask of interrupt sources to allow for resume
-+ */
-+int __init armctrl_init(void __iomem * base, unsigned int irq_start,
-+ u32 armctrl_sources, u32 resume_sources)
-+{
-+ unsigned int irq;
-+
-+ for (irq = 0; irq < BCM2708_ALLOC_IRQS; irq++) {
-+ unsigned int data = irq;
-+ if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO)
-+ data = remap_irqs[irq - INTERRUPT_JPEG];
-+
-+ irq_set_chip(irq, &armctrl_chip);
-+ irq_set_chip_data(irq, (void *)data);
-+ irq_set_handler(irq, handle_level_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+ }
-+
-+ armctrl_pm_register(base, irq_start, resume_sources);
-+ armctrl_dt_init();
-+ return 0;
-+}
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/armctrl.h
-@@ -0,0 +1,27 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/armctrl.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_ARMCTRL_H
-+#define __BCM2708_ARMCTRL_H
-+
-+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start,
-+ u32 armctrl_sources, u32 resume_sources);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/bcm2708.c
-@@ -0,0 +1,622 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/bcm2708.c
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <linux/syscore_ops.h>
-+#include <linux/interrupt.h>
-+#include <linux/amba/bus.h>
-+#include <linux/amba/clcd.h>
-+#include <linux/clk-provider.h>
-+#include <linux/clkdev.h>
-+#include <linux/clockchips.h>
-+#include <linux/cnt32_to_63.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/gpio/machine.h>
-+
-+#include <linux/version.h>
-+#include <linux/clkdev.h>
-+#include <asm/system_info.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <linux/sched_clock.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach/time.h>
-+#include <asm/mach/map.h>
-+
-+#include <mach/timex.h>
-+#include <mach/system.h>
-+
-+#include <linux/delay.h>
-+
-+#include "bcm2708.h"
-+#include "armctrl.h"
-+
-+#ifdef CONFIG_BCM_VC_CMA
-+#include <linux/broadcom/vc_cma.h>
-+#endif
-+
-+
-+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to
-+ * give us IO access only to 64Mbytes of physical memory (26 bits). We could
-+ * represent this window by setting our dmamasks to 26 bits but, in fact
-+ * we're not going to use addresses outside this range (they're not in real
-+ * memory) so we don't bother.
-+ *
-+ * In the future we might include code to use this IOMMU to remap other
-+ * physical addresses onto VideoCore memory then the use of 32-bits would be
-+ * more legitimate.
-+ */
-+#define DMA_MASK_BITS_COMMON 32
-+
-+/* command line parameters */
-+static unsigned boardrev, serial;
-+static unsigned uart_clock = UART0_CLOCK;
-+static unsigned disk_led_gpio = 16;
-+static unsigned disk_led_active_low = 1;
-+static unsigned reboot_part = 0;
-+
-+static unsigned use_dt = 0;
-+
-+static void __init bcm2708_init_led(void);
-+
-+void __init bcm2708_init_irq(void)
-+{
-+ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0);
-+}
-+
-+static struct map_desc bcm2708_io_desc[] __initdata = {
-+ {
-+ .virtual = IO_ADDRESS(ARMCTRL_BASE),
-+ .pfn = __phys_to_pfn(ARMCTRL_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(UART0_BASE),
-+ .pfn = __phys_to_pfn(UART0_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(UART1_BASE),
-+ .pfn = __phys_to_pfn(UART1_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(DMA_BASE),
-+ .pfn = __phys_to_pfn(DMA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(MCORE_BASE),
-+ .pfn = __phys_to_pfn(MCORE_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(ST_BASE),
-+ .pfn = __phys_to_pfn(ST_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(USB_BASE),
-+ .pfn = __phys_to_pfn(USB_BASE),
-+ .length = SZ_128K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(PM_BASE),
-+ .pfn = __phys_to_pfn(PM_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(GPIO_BASE),
-+ .pfn = __phys_to_pfn(GPIO_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE}
-+};
-+
-+void __init bcm2708_map_io(void)
-+{
-+ iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc));
-+}
-+
-+/* The STC is a free running counter that increments at the rate of 1MHz */
-+#define STC_FREQ_HZ 1000000
-+
-+static inline uint32_t timer_read(void)
-+{
-+ /* STC: a free running counter that increments at the rate of 1MHz */
-+ return readl(__io_address(ST_BASE + 0x04));
-+}
-+
-+static unsigned long bcm2708_read_current_timer(void)
-+{
-+ return timer_read();
-+}
-+
-+static u64 notrace bcm2708_read_sched_clock(void)
-+{
-+ return timer_read();
-+}
-+
-+static cycle_t clksrc_read(struct clocksource *cs)
-+{
-+ return timer_read();
-+}
-+
-+static struct clocksource clocksource_stc = {
-+ .name = "stc",
-+ .rating = 300,
-+ .read = clksrc_read,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+unsigned long frc_clock_ticks32(void)
-+{
-+ return timer_read();
-+}
-+
-+static void __init bcm2708_clocksource_init(void)
-+{
-+ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) {
-+ printk(KERN_ERR "timer: failed to initialize clock "
-+ "source %s\n", clocksource_stc.name);
-+ }
-+}
-+
-+struct clk __init *bcm2708_clk_register(const char *name, unsigned long fixed_rate)
-+{
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT,
-+ fixed_rate);
-+ if (IS_ERR(clk))
-+ pr_err("%s not registered\n", name);
-+
-+ return clk;
-+}
-+
-+void __init bcm2708_register_clkdev(struct clk *clk, const char *name)
-+{
-+ int ret;
-+
-+ ret = clk_register_clkdev(clk, NULL, name);
-+ if (ret)
-+ pr_err("%s alias not registered\n", name);
-+}
-+
-+void __init bcm2708_init_clocks(void)
-+{
-+ struct clk *clk;
-+
-+ clk = bcm2708_clk_register("uart0_clk", uart_clock);
-+ bcm2708_register_clkdev(clk, "dev:f1");
-+
-+ clk = bcm2708_clk_register("sdhost_clk", 250000000);
-+ bcm2708_register_clkdev(clk, "mmc-bcm2835.0");
-+ bcm2708_register_clkdev(clk, "bcm2708_spi.0");
-+ bcm2708_register_clkdev(clk, "bcm2708_i2c.0");
-+ bcm2708_register_clkdev(clk, "bcm2708_i2c.1");
-+}
-+
-+#define UART0_IRQ { IRQ_UART, 0 /*NO_IRQ*/ }
-+#define UART0_DMA { 15, 14 }
-+
-+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-+
-+static struct amba_device *amba_devs[] __initdata = {
-+ &uart0_device,
-+};
-+
-+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_fb_device = {
-+ .name = "bcm2708_fb",
-+ .id = -1, /* only one bcm2708_fb */
-+ .resource = NULL,
-+ .num_resources = 0,
-+ .dev = {
-+ .dma_mask = &fb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+static struct resource bcm2708_usb_resources[] = {
-+ [0] = {
-+ .start = USB_BASE,
-+ .end = USB_BASE + SZ_128K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_USB,
-+ .end = IRQ_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_usb_device = {
-+ .name = "bcm2708_usb",
-+ .id = -1, /* only one bcm2708_usb */
-+ .resource = bcm2708_usb_resources,
-+ .num_resources = ARRAY_SIZE(bcm2708_usb_resources),
-+ .dev = {
-+ .dma_mask = &usb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+static struct resource bcm2708_vcio_resources[] = {
-+ {
-+ .start = ARMCTRL_0_MAIL0_BASE,
-+ .end = ARMCTRL_0_MAIL0_BASE + SZ_64 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = IRQ_ARM_MAILBOX,
-+ .end = IRQ_ARM_MAILBOX,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_vcio_device = {
-+ .name = "bcm2708_vcio",
-+ .id = -1, /* only one VideoCore I/O area */
-+ .resource = bcm2708_vcio_resources,
-+ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources),
-+ .dev = {
-+ .dma_mask = &vcio_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+int __init bcm_register_device(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = platform_device_register(pdev);
-+ if (ret)
-+ pr_debug("Unable to register platform device '%s': %d\n",
-+ pdev->name, ret);
-+
-+ return ret;
-+}
-+
-+/*
-+ * Use these macros for platform and i2c devices that are present in the
-+ * Device Tree. This way the devices are only added on non-DT systems.
-+ */
-+#define bcm_register_device_dt(pdev) \
-+ if (!use_dt) bcm_register_device(pdev)
-+
-+#define i2c_register_board_info_dt(busnum, info, n) \
-+ if (!use_dt) i2c_register_board_info(busnum, info, n)
-+
-+int calc_rsts(int partition)
-+{
-+ return PM_PASSWORD |
-+ ((partition & (1 << 0)) << 0) |
-+ ((partition & (1 << 1)) << 1) |
-+ ((partition & (1 << 2)) << 2) |
-+ ((partition & (1 << 3)) << 3) |
-+ ((partition & (1 << 4)) << 4) |
-+ ((partition & (1 << 5)) << 5);
-+}
-+
-+static void bcm2708_restart(enum reboot_mode mode, const char *cmd)
-+{
-+ extern char bcm2708_reboot_mode;
-+ uint32_t pm_rstc, pm_wdog;
-+ uint32_t timeout = 10;
-+ uint32_t pm_rsts = 0;
-+
-+ if(bcm2708_reboot_mode == 'q')
-+ {
-+ // NOOBS < 1.3 booting with reboot=q
-+ pm_rsts = readl(__io_address(PM_RSTS));
-+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET;
-+ }
-+ else if(bcm2708_reboot_mode == 'p')
-+ {
-+ // NOOBS < 1.3 halting
-+ pm_rsts = readl(__io_address(PM_RSTS));
-+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET;
-+ }
-+ else
-+ {
-+ pm_rsts = calc_rsts(reboot_part);
-+ }
-+
-+ writel(pm_rsts, __io_address(PM_RSTS));
-+
-+ /* Setup watchdog for reset */
-+ pm_rstc = readl(__io_address(PM_RSTC));
-+
-+ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0)
-+ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET;
-+
-+ writel(pm_wdog, __io_address(PM_WDOG));
-+ writel(pm_rstc, __io_address(PM_RSTC));
-+}
-+
-+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */
-+static void bcm2708_power_off(void)
-+{
-+ extern char bcm2708_reboot_mode;
-+ if(bcm2708_reboot_mode == 'q')
-+ {
-+ // NOOBS < v1.3
-+ bcm2708_restart('p', "");
-+ }
-+ else
-+ {
-+ /* partition 63 is special code for HALT the bootloader knows not to boot*/
-+ reboot_part = 63;
-+ /* continue with normal reset mechanism */
-+ bcm2708_restart(0, "");
-+ }
-+}
-+
-+static void __init bcm2708_init_uart1(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart");
-+ if (of_device_is_available(np)) {
-+ pr_info("bcm2708: Mini UART enabled\n");
-+ writel(1, __io_address(UART1_BASE + 0x4));
-+ }
-+}
-+
-+#ifdef CONFIG_OF
-+static void __init bcm2708_dt_init(void)
-+{
-+ int ret;
-+
-+ of_clk_init(NULL);
-+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-+ if (ret) {
-+ pr_err("of_platform_populate failed: %d\n", ret);
-+ /* Proceed as if CONFIG_OF was not defined */
-+ } else {
-+ use_dt = 1;
-+ }
-+}
-+#else
-+static void __init bcm2708_dt_init(void) { }
-+#endif /* CONFIG_OF */
-+
-+void __init bcm2708_init(void)
-+{
-+ int i;
-+
-+#if defined(CONFIG_BCM_VC_CMA)
-+ vc_cma_early_init();
-+#endif
-+ printk("bcm2708.uart_clock = %d\n", uart_clock);
-+ pm_power_off = bcm2708_power_off;
-+
-+ bcm2708_init_clocks();
-+ bcm2708_dt_init();
-+
-+ bcm_register_device(&bcm2708_vcio_device);
-+#ifdef CONFIG_BCM2708_GPIO
-+ bcm_register_device_dt(&bcm2708_gpio_device);
-+#endif
-+ bcm_register_device_dt(&bcm2708_fb_device);
-+ bcm_register_device_dt(&bcm2708_usb_device);
-+
-+ bcm2708_init_led();
-+ bcm2708_init_uart1();
-+
-+ if (!use_dt) {
-+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-+ struct amba_device *d = amba_devs[i];
-+ amba_device_register(d, &iomem_resource);
-+ }
-+ }
-+ system_rev = boardrev;
-+ system_serial_low = serial;
-+}
-+
-+static void timer_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *clk)
-+{
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ break;
-+ case CLOCK_EVT_MODE_PERIODIC:
-+
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_RESUME:
-+
-+ default:
-+ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n",
-+ (int)mode);
-+ break;
-+ }
-+
-+}
-+
-+static int timer_set_next_event(unsigned long cycles,
-+ struct clock_event_device *unused)
-+{
-+ unsigned long stc;
-+ do {
-+ stc = readl(__io_address(ST_BASE + 0x04));
-+ /* We could take a FIQ here, which may push ST above STC3 */
-+ writel(stc + cycles, __io_address(ST_BASE + 0x18));
-+ } while ((signed long) cycles >= 0 &&
-+ (signed long) (readl(__io_address(ST_BASE + 0x04)) - stc)
-+ >= (signed long) cycles);
-+ return 0;
-+}
-+
-+static struct clock_event_device timer0_clockevent = {
-+ .name = "timer0",
-+ .shift = 32,
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .set_mode = timer_set_mode,
-+ .set_next_event = timer_set_next_event,
-+};
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id)
-+{
-+ struct clock_event_device *evt = &timer0_clockevent;
-+
-+ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */
-+
-+ evt->event_handler(evt);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction bcm2708_timer_irq = {
-+ .name = "BCM2708 Timer Tick",
-+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
-+ .handler = bcm2708_timer_interrupt,
-+};
-+
-+/*
-+ * Set up timer interrupt, and return the current time in seconds.
-+ */
-+
-+static struct delay_timer bcm2708_delay_timer = {
-+ .read_current_timer = bcm2708_read_current_timer,
-+ .freq = STC_FREQ_HZ,
-+};
-+
-+static void __init bcm2708_timer_init(void)
-+{
-+ /* init high res timer */
-+ bcm2708_clocksource_init();
-+
-+ /*
-+ * Make irqs happen for the system timer
-+ */
-+ setup_irq(IRQ_TIMER3, &bcm2708_timer_irq);
-+
-+ sched_clock_register(bcm2708_read_sched_clock, 32, STC_FREQ_HZ);
-+
-+ timer0_clockevent.mult =
-+ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift);
-+ timer0_clockevent.max_delta_ns =
-+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-+ timer0_clockevent.min_delta_ns =
-+ clockevent_delta2ns(0xf, &timer0_clockevent);
-+
-+ timer0_clockevent.cpumask = cpumask_of(0);
-+ clockevents_register_device(&timer0_clockevent);
-+
-+ register_current_timer_delay(&bcm2708_delay_timer);
-+}
-+
-+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-+#include <linux/leds.h>
-+
-+static struct gpio_led bcm2708_leds[] = {
-+ [0] = {
-+ .gpio = 16,
-+ .name = "led0",
-+ .default_trigger = "mmc0",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data bcm2708_led_pdata = {
-+ .num_leds = ARRAY_SIZE(bcm2708_leds),
-+ .leds = bcm2708_leds,
-+};
-+
-+static struct platform_device bcm2708_led_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &bcm2708_led_pdata,
-+ },
-+};
-+
-+static void __init bcm2708_init_led(void)
-+{
-+ bcm2708_leds[0].gpio = disk_led_gpio;
-+ bcm2708_leds[0].active_low = disk_led_active_low;
-+ bcm_register_device_dt(&bcm2708_led_device);
-+}
-+#else
-+static inline void bcm2708_init_led(void)
-+{
-+}
-+#endif
-+
-+void __init bcm2708_init_early(void)
-+{
-+ /*
-+ * Some devices allocate their coherent buffers from atomic
-+ * context. Increase size of atomic coherent pool to make sure such
-+ * the allocations won't fail.
-+ */
-+ init_dma_coherent_pool_size(SZ_4M);
-+}
-+
-+static void __init board_reserve(void)
-+{
-+#if defined(CONFIG_BCM_VC_CMA)
-+ vc_cma_reserve();
-+#endif
-+}
-+
-+static const char * const bcm2708_compat[] = {
-+ "brcm,bcm2708",
-+ NULL
-+};
-+
-+MACHINE_START(BCM2708, "BCM2708")
-+ /* Maintainer: Broadcom Europe Ltd. */
-+ .map_io = bcm2708_map_io,
-+ .init_irq = bcm2708_init_irq,
-+ .init_time = bcm2708_timer_init,
-+ .init_machine = bcm2708_init,
-+ .init_early = bcm2708_init_early,
-+ .reserve = board_reserve,
-+ .restart = bcm2708_restart,
-+ .dt_compat = bcm2708_compat,
-+MACHINE_END
-+
-+module_param(boardrev, uint, 0644);
-+module_param(serial, uint, 0644);
-+module_param(uart_clock, uint, 0644);
-+module_param(disk_led_gpio, uint, 0644);
-+module_param(disk_led_active_low, uint, 0644);
-+module_param(reboot_part, uint, 0644);
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/bcm2708.h
-@@ -0,0 +1,49 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/bcm2708.h
-+ *
-+ * BCM2708 machine support header
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_BCM2708_H
-+#define __BCM2708_BCM2708_H
-+
-+#include <linux/amba/bus.h>
-+
-+extern void __init bcm2708_init(void);
-+extern void __init bcm2708_init_irq(void);
-+extern void __init bcm2708_map_io(void);
-+extern struct sys_timer bcm2708_timer;
-+extern unsigned int mmc_status(struct device *dev);
-+
-+#define AMBA_DEVICE(name, busid, base, plat) \
-+static struct amba_device name##_device = { \
-+ .dev = { \
-+ .coherent_dma_mask = ~0, \
-+ .init_name = busid, \
-+ .platform_data = plat, \
-+ }, \
-+ .res = { \
-+ .start = base##_BASE, \
-+ .end = (base##_BASE) + SZ_4K - 1,\
-+ .flags = IORESOURCE_MEM, \
-+ }, \
-+ .irq = base##_IRQ, \
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/arm_control.h
-@@ -0,0 +1,419 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/arm_control.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_ARM_CONTROL_H
-+#define __BCM2708_ARM_CONTROL_H
-+
-+/*
-+ * Definitions and addresses for the ARM CONTROL logic
-+ * This file is manually generated.
-+ */
-+
-+#define ARM_BASE 0x7E00B000
-+
-+/* Basic configuration */
-+#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000)
-+#define ARM_C0_SIZ128M 0x00000000
-+#define ARM_C0_SIZ256M 0x00000001
-+#define ARM_C0_SIZ512M 0x00000002
-+#define ARM_C0_SIZ1G 0x00000003
-+#define ARM_C0_BRESP0 0x00000000
-+#define ARM_C0_BRESP1 0x00000004
-+#define ARM_C0_BRESP2 0x00000008
-+#define ARM_C0_BOOTHI 0x00000010
-+#define ARM_C0_UNUSED05 0x00000020 /* free */
-+#define ARM_C0_FULLPERI 0x00000040
-+#define ARM_C0_UNUSED78 0x00000180 /* free */
-+#define ARM_C0_JTAGMASK 0x00000E00
-+#define ARM_C0_JTAGOFF 0x00000000
-+#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */
-+#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */
-+#define ARM_C0_APROTMSK 0x0000F000
-+#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */
-+#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */
-+#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */
-+#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */
-+#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */
-+#define ARM_C0_PRIO_L2 0x0F000000
-+#define ARM_C0_PRIO_UC 0xF0000000
-+
-+#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */
-+#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */
-+#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */
-+
-+
-+#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440)
-+#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */
-+#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */
-+#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */
-+#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */
-+#define ARM_C1_PERSON 0x00000100 /* peripherals on */
-+#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */
-+
-+#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444)
-+#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */
-+#define ARM_S_READPEND 0x000003FF /* pending reads counter */
-+#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */
-+
-+#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448)
-+#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */
-+#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */
-+#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */
-+#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */
-+#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */
-+#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */
-+
-+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C)
-+#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C)
-+#define ARM_IDVAL 0x364D5241
-+
-+/* Translation memory */
-+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100)
-+/* 32 locations: 0x100.. 0x17F */
-+/* 32 spare means we CAN go to 64 pages.... */
-+
-+
-+/* Interrupts */
-+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */
-+#define ARM_I0_TIMER 0x00000001 /* timer IRQ */
-+#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */
-+#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */
-+#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */
-+#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */
-+#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */
-+
-+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */
-+/* todo: all I1_interrupt sources */
-+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */
-+/* todo: all I2_interrupt sources */
-+
-+#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */
-+#define ARM_IF_INDEX 0x0000007F /* FIQ select */
-+#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */
-+#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */
-+#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */
-+#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */
-+#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */
-+#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */
-+#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */
-+#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */
-+#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */
-+
-+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */
-+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */
-+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */
-+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */
-+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */
-+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */
-+#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */
-+#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */
-+#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */
-+#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */
-+#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */
-+#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */
-+#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */
-+
-+/* Timer */
-+/* For reg. fields see sp804 spec. */
-+#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400)
-+#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404)
-+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408)
-+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C)
-+#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410)
-+#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414)
-+#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418)
-+#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c)
-+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420)
-+
-+#define TIMER_CTRL_ONESHOT (1 << 0)
-+#define TIMER_CTRL_32BIT (1 << 1)
-+#define TIMER_CTRL_DIV1 (0 << 2)
-+#define TIMER_CTRL_DIV16 (1 << 2)
-+#define TIMER_CTRL_DIV256 (2 << 2)
-+#define TIMER_CTRL_IE (1 << 5)
-+#define TIMER_CTRL_PERIODIC (1 << 6)
-+#define TIMER_CTRL_ENABLE (1 << 7)
-+#define TIMER_CTRL_DBGHALT (1 << 8)
-+#define TIMER_CTRL_ENAFREE (1 << 9)
-+#define TIMER_CTRL_FREEDIV_SHIFT 16)
-+#define TIMER_CTRL_FREEDIV_MASK 0xff
-+
-+/* Semaphores, Doorbells, Mailboxes */
-+#define ARM_SBM_OWN0 (ARM_BASE+0x800)
-+#define ARM_SBM_OWN1 (ARM_BASE+0x900)
-+#define ARM_SBM_OWN2 (ARM_BASE+0xA00)
-+#define ARM_SBM_OWN3 (ARM_BASE+0xB00)
-+
-+/* MAILBOXES
-+ * Register flags are common across all
-+ * owner registers. See end of this section
-+ *
-+ * Semaphores, Doorbells, Mailboxes Owner 0
-+ *
-+ */
-+
-+#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
-+#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
-+#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04)
-+#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08)
-+#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C)
-+#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10)
-+#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14)
-+#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18)
-+#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C)
-+#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40)
-+#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44)
-+#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48)
-+#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C)
-+/* MAILBOX 0 access in Owner 0 area */
-+/* Some addresses should ONLY be used by owner 0 */
-+#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */
-+#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */
-+#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */
-+#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */
-+#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */
-+#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */
-+/* MAILBOX 1 access in Owner 0 area */
-+/* Owner 0 should only WRITE to this mailbox */
-+#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */
-+/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */
-+#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */
-+#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */
-+#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 1 */
-+#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
-+#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
-+#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04)
-+#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08)
-+#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C)
-+#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10)
-+#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14)
-+#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18)
-+#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C)
-+#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40)
-+#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44)
-+#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48)
-+#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C)
-+/* MAILBOX 0 access in Owner 0 area */
-+/* Owner 1 should only WRITE to this mailbox */
-+#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */
-+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 0 area */
-+#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */
-+#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */
-+#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */
-+#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */
-+#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */
-+#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC)
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */
-+#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */
-+#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */
-+#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 2 */
-+#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
-+#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
-+#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04)
-+#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08)
-+#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C)
-+#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10)
-+#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14)
-+#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18)
-+#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C)
-+#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40)
-+#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44)
-+#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48)
-+#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C)
-+/* MAILBOX 0 access in Owner 2 area */
-+/* Owner 2 should only WRITE to this mailbox */
-+#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */
-+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 2 area */
-+/* Owner 2 should only WRITE to this mailbox */
-+#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */
-+/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */
-+#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */
-+#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */
-+#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 3 */
-+#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
-+#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
-+#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04)
-+#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08)
-+#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C)
-+#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10)
-+#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14)
-+#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18)
-+#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C)
-+#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40)
-+#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44)
-+#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48)
-+#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C)
-+/* MAILBOX 0 access in Owner 3 area */
-+/* Owner 3 should only WRITE to this mailbox */
-+#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */
-+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 3 area */
-+/* Owner 3 should only WRITE to this mailbox */
-+#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */
-+/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */
-+#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */
-+#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */
-+#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */
-+
-+
-+
-+/* Mailbox flags. Valid for all owners */
-+
-+/* Mailbox status register (...0x98) */
-+#define ARM_MS_FULL 0x80000000
-+#define ARM_MS_EMPTY 0x40000000
-+#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */
-+
-+/* MAILBOX config/status register (...0x9C) */
-+/* ANY write to this register clears the error bits! */
-+#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */
-+#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */
-+#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */
-+#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */
-+#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */
-+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */
-+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */
-+/* Bit 7 is unused */
-+#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */
-+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */
-+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */
-+
-+/* Semaphore clear/debug register (...0xE0) */
-+#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */
-+#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */
-+#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */
-+#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */
-+#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */
-+#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */
-+#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */
-+#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */
-+#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */
-+#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */
-+#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */
-+#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */
-+#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */
-+#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */
-+#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */
-+#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */
-+
-+/* Doorbells clear/debug register (...0xE4) */
-+#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */
-+#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */
-+#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */
-+#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */
-+#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */
-+#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */
-+#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */
-+#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */
-+
-+/* MY IRQS register (...0xF8) */
-+#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */
-+#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */
-+
-+/* ALL IRQS register (...0xF8) */
-+#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */
-+#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */
-+#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */
-+#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */
-+#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */
-+#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */
-+#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */
-+#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */
-+#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */
-+#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */
-+/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */
-+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */
-+/* */
-+/* ARM JTAG BASH */
-+/* */
-+#define AJB_BASE 0x7e2000c0
-+
-+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00)
-+#define AJB_BITS0 0x000000
-+#define AJB_BITS4 0x000004
-+#define AJB_BITS8 0x000008
-+#define AJB_BITS12 0x00000C
-+#define AJB_BITS16 0x000010
-+#define AJB_BITS20 0x000014
-+#define AJB_BITS24 0x000018
-+#define AJB_BITS28 0x00001C
-+#define AJB_BITS32 0x000020
-+#define AJB_BITS34 0x000022
-+#define AJB_OUT_MS 0x000040
-+#define AJB_OUT_LS 0x000000
-+#define AJB_INV_CLK 0x000080
-+#define AJB_D0_RISE 0x000100
-+#define AJB_D0_FALL 0x000000
-+#define AJB_D1_RISE 0x000200
-+#define AJB_D1_FALL 0x000000
-+#define AJB_IN_RISE 0x000400
-+#define AJB_IN_FALL 0x000000
-+#define AJB_ENABLE 0x000800
-+#define AJB_HOLD0 0x000000
-+#define AJB_HOLD1 0x001000
-+#define AJB_HOLD2 0x002000
-+#define AJB_HOLD3 0x003000
-+#define AJB_RESETN 0x004000
-+#define AJB_CLKSHFT 16
-+#define AJB_BUSY 0x80000000
-+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04)
-+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08)
-+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/clkdev.h
-@@ -0,0 +1,7 @@
-+#ifndef __ASM_MACH_CLKDEV_H
-+#define __ASM_MACH_CLKDEV_H
-+
-+#define __clk_get(clk) ({ 1; })
-+#define __clk_put(clk) do { } while (0)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/debug-macro.S
-@@ -0,0 +1,22 @@
-+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
-+ *
-+ * Debugging macro include header
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 1994-1999 Russell King
-+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+*/
-+
-+#include <mach/platform.h>
-+
-+ .macro addruart, rp, rv, tmp
-+ ldr \rp, =UART0_BASE
-+ ldr \rv, =IO_ADDRESS(UART0_BASE)
-+ .endm
-+
-+#include <debug/pl01x.S>
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/entry-macro.S
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for BCM2708 platforms
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <mach/hardware.h>
-+
-+ .macro disable_fiq
-+ .endm
-+
-+ .macro get_irqnr_preamble, base, tmp
-+ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE)
-+ .endm
-+
-+ .macro arch_ret_to_user, tmp1, tmp2
-+ .endm
-+
-+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-+ /* get masked status */
-+ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)]
-+ mov \irqnr, #(ARM_IRQ0_BASE + 31)
-+ and \tmp, \irqstat, #0x300 @ save bits 8 and 9
-+ /* clear bits 8 and 9, and test */
-+ bics \irqstat, \irqstat, #0x300
-+ bne 1010f
-+
-+ tst \tmp, #0x100
-+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)]
-+ movne \irqnr, #(ARM_IRQ1_BASE + 31)
-+ @ Mask out the interrupts also present in PEND0 - see SW-5809
-+ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10))
-+ bicne \irqstat, #((1<<18) | (1<<19))
-+ bne 1010f
-+
-+ tst \tmp, #0x200
-+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)]
-+ movne \irqnr, #(ARM_IRQ2_BASE + 31)
-+ @ Mask out the interrupts also present in PEND0 - see SW-5809
-+ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25))
-+ bicne \irqstat, #((1<<30))
-+ beq 1020f
-+
-+1010:
-+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
-+ @ N.B. CLZ is an ARM5 instruction.
-+ sub \tmp, \irqstat, #1
-+ eor \irqstat, \irqstat, \tmp
-+ clz \tmp, \irqstat
-+ sub \irqnr, \tmp
-+
-+1020: @ EQ will be set if no irqs pending
-+
-+ .endm
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/frc.h
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/timex.h
-+ *
-+ * BCM2708 free running counter (timer)
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _MACH_FRC_H
-+#define _MACH_FRC_H
-+
-+#define FRC_TICK_RATE (1000000)
-+
-+/*! Free running counter incrementing at the CLOCK_TICK_RATE
-+ (slightly faster than frc_clock_ticks63()
-+ */
-+extern unsigned long frc_clock_ticks32(void);
-+
-+/*! Free running counter incrementing at the CLOCK_TICK_RATE
-+ * Note - top bit should be ignored (see cnt32_to_63)
-+ */
-+extern unsigned long long frc_clock_ticks63(void);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/hardware.h
-@@ -0,0 +1,28 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/hardware.h
-+ *
-+ * This file contains the hardware definitions of the BCM2708 devices.
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include <asm/sizes.h>
-+#include <mach/platform.h>
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/io.h
-@@ -0,0 +1,27 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/io.h
-+ *
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARM_ARCH_IO_H
-+#define __ASM_ARM_ARCH_IO_H
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+#define __io(a) __typesafe_io(a)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/irqs.h
-@@ -0,0 +1,196 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/irqs.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _BCM2708_IRQS_H_
-+#define _BCM2708_IRQS_H_
-+
-+#include <mach/platform.h>
-+
-+/*
-+ * IRQ interrupts definitions are the same as the INT definitions
-+ * held within platform.h
-+ */
-+#define IRQ_ARMCTRL_START 0
-+#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0)
-+#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1)
-+#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2)
-+#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3)
-+#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0)
-+#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1)
-+#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2)
-+#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG)
-+#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP)
-+#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB)
-+#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D)
-+#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER)
-+#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0)
-+#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1)
-+#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2)
-+#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3)
-+#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0)
-+#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1)
-+#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2)
-+#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3)
-+#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4)
-+#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5)
-+#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6)
-+#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7)
-+#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8)
-+#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9)
-+#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10)
-+#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11)
-+#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12)
-+#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX)
-+#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM)
-+#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA)
-+#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT)
-+#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER)
-+#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX)
-+#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC)
-+#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0)
-+#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE)
-+#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0)
-+#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1)
-+#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0)
-+#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1)
-+#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1)
-+#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV)
-+#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1)
-+#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0)
-+#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1)
-+#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR)
-+#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI)
-+#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0)
-+#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1)
-+#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2)
-+#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3)
-+#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C)
-+#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI)
-+#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM)
-+#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO)
-+#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART)
-+#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS)
-+#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC)
-+#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG)
-+#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG)
-+#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO)
-+#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON)
-+
-+#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER)
-+#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX)
-+#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0)
-+#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1)
-+#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED)
-+#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED)
-+#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0)
-+#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1)
-+#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1)
-+#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2)
-+
-+/*
-+ * FIQ interrupts definitions are the same as the INT definitions.
-+ */
-+#define FIQ_TIMER0 INT_TIMER0
-+#define FIQ_TIMER1 INT_TIMER1
-+#define FIQ_TIMER2 INT_TIMER2
-+#define FIQ_TIMER3 INT_TIMER3
-+#define FIQ_CODEC0 INT_CODEC0
-+#define FIQ_CODEC1 INT_CODEC1
-+#define FIQ_CODEC2 INT_CODEC2
-+#define FIQ_JPEG INT_JPEG
-+#define FIQ_ISP INT_ISP
-+#define FIQ_USB INT_USB
-+#define FIQ_3D INT_3D
-+#define FIQ_TRANSPOSER INT_TRANSPOSER
-+#define FIQ_MULTICORESYNC0 INT_MULTICORESYNC0
-+#define FIQ_MULTICORESYNC1 INT_MULTICORESYNC1
-+#define FIQ_MULTICORESYNC2 INT_MULTICORESYNC2
-+#define FIQ_MULTICORESYNC3 INT_MULTICORESYNC3
-+#define FIQ_DMA0 INT_DMA0
-+#define FIQ_DMA1 INT_DMA1
-+#define FIQ_DMA2 INT_DMA2
-+#define FIQ_DMA3 INT_DMA3
-+#define FIQ_DMA4 INT_DMA4
-+#define FIQ_DMA5 INT_DMA5
-+#define FIQ_DMA6 INT_DMA6
-+#define FIQ_DMA7 INT_DMA7
-+#define FIQ_DMA8 INT_DMA8
-+#define FIQ_DMA9 INT_DMA9
-+#define FIQ_DMA10 INT_DMA10
-+#define FIQ_DMA11 INT_DMA11
-+#define FIQ_DMA12 INT_DMA12
-+#define FIQ_AUX INT_AUX
-+#define FIQ_ARM INT_ARM
-+#define FIQ_VPUDMA INT_VPUDMA
-+#define FIQ_HOSTPORT INT_HOSTPORT
-+#define FIQ_VIDEOSCALER INT_VIDEOSCALER
-+#define FIQ_CCP2TX INT_CCP2TX
-+#define FIQ_SDC INT_SDC
-+#define FIQ_DSI0 INT_DSI0
-+#define FIQ_AVE INT_AVE
-+#define FIQ_CAM0 INT_CAM0
-+#define FIQ_CAM1 INT_CAM1
-+#define FIQ_HDMI0 INT_HDMI0
-+#define FIQ_HDMI1 INT_HDMI1
-+#define FIQ_PIXELVALVE1 INT_PIXELVALVE1
-+#define FIQ_I2CSPISLV INT_I2CSPISLV
-+#define FIQ_DSI1 INT_DSI1
-+#define FIQ_PWA0 INT_PWA0
-+#define FIQ_PWA1 INT_PWA1
-+#define FIQ_CPR INT_CPR
-+#define FIQ_SMI INT_SMI
-+#define FIQ_GPIO0 INT_GPIO0
-+#define FIQ_GPIO1 INT_GPIO1
-+#define FIQ_GPIO2 INT_GPIO2
-+#define FIQ_GPIO3 INT_GPIO3
-+#define FIQ_I2C INT_I2C
-+#define FIQ_SPI INT_SPI
-+#define FIQ_I2SPCM INT_I2SPCM
-+#define FIQ_SDIO INT_SDIO
-+#define FIQ_UART INT_UART
-+#define FIQ_SLIMBUS INT_SLIMBUS
-+#define FIQ_VEC INT_VEC
-+#define FIQ_CPG INT_CPG
-+#define FIQ_RNG INT_RNG
-+#define FIQ_ARASANSDIO INT_ARASANSDIO
-+#define FIQ_AVSPMON INT_AVSPMON
-+
-+#define FIQ_ARM_TIMER INT_ARM_TIMER
-+#define FIQ_ARM_MAILBOX INT_ARM_MAILBOX
-+#define FIQ_ARM_DOORBELL_0 INT_ARM_DOORBELL_0
-+#define FIQ_ARM_DOORBELL_1 INT_ARM_DOORBELL_1
-+#define FIQ_VPU0_HALTED INT_VPU0_HALTED
-+#define FIQ_VPU1_HALTED INT_VPU1_HALTED
-+#define FIQ_ILLEGAL_TYPE0 INT_ILLEGAL_TYPE0
-+#define FIQ_ILLEGAL_TYPE1 INT_ILLEGAL_TYPE1
-+#define FIQ_PENDING1 INT_PENDING1
-+#define FIQ_PENDING2 INT_PENDING2
-+
-+#define HARD_IRQS (64 + 21)
-+#define GPIO_IRQ_START (HARD_IRQS)
-+#define GPIO_IRQS (32*5)
-+#define SPARE_ALLOC_IRQS 64
-+#define BCM2708_ALLOC_IRQS (HARD_IRQS+FIQ_IRQS+GPIO_IRQS+SPARE_ALLOC_IRQS)
-+#define FREE_IRQS 128
-+#define NR_IRQS (BCM2708_ALLOC_IRQS+FREE_IRQS)
-+
-+#endif /* _BCM2708_IRQS_H_ */
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/memory.h
-@@ -0,0 +1,57 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/memory.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+/* Memory overview:
-+
-+ [ARMcore] <--virtual addr-->
-+ [ARMmmu] <--physical addr-->
-+ [GERTmap] <--bus add-->
-+ [VCperiph]
-+
-+*/
-+
-+/*
-+ * Physical DRAM offset.
-+ */
-+#define BCM_PLAT_PHYS_OFFSET UL(0x00000000)
-+#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */
-+
-+#ifdef CONFIG_BCM2708_NOL2CACHE
-+ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */
-+#else
-+ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */
-+#endif
-+
-+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment
-+ * will provide the offset into this area as well as setting the bits that
-+ * stop the L1 and L2 cache from being used
-+ *
-+ * WARNING: this only works because the ARM is given memory at a fixed location
-+ * (ARMMEM_OFFSET)
-+ */
-+#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET)
-+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
-+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
-+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET))
-+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET))
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/platform.h
-@@ -0,0 +1,228 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/platform.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _BCM2708_PLATFORM_H
-+#define _BCM2708_PLATFORM_H
-+
-+
-+/* macros to get at IO space when running virtually */
-+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-+
-+#define __io_address(n) IOMEM(IO_ADDRESS(n))
-+
-+
-+/*
-+ * SDRAM
-+ */
-+#define BCM2708_SDRAM_BASE 0x00000000
-+
-+/*
-+ * Logic expansion modules
-+ *
-+ */
-+
-+
-+/* ------------------------------------------------------------------------
-+ * BCM2708 ARMCTRL Registers
-+ * ------------------------------------------------------------------------
-+ */
-+
-+#define HW_REGISTER_RW(addr) (addr)
-+#define HW_REGISTER_RO(addr) (addr)
-+
-+#include "arm_control.h"
-+#undef ARM_BASE
-+
-+/*
-+ * Definitions and addresses for the ARM CONTROL logic
-+ * This file is manually generated.
-+ */
-+
-+#define BCM2708_PERI_BASE 0x20000000
-+#define IC0_BASE (BCM2708_PERI_BASE + 0x2000)
-+#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */
-+#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */
-+#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */
-+#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
-+#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
-+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */
-+#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
-+#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */
-+#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */
-+#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
-+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */
-+#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
-+#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
-+#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
-+#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */
-+#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */
-+#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
-+#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
-+#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
-+
-+#define ARMCTRL_BASE (ARM_BASE + 0x000)
-+#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */
-+#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */
-+#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */
-+
-+
-+/*
-+ * Interrupt assignments
-+ */
-+
-+#define ARM_IRQ1_BASE 0
-+#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0)
-+#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1)
-+#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2)
-+#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3)
-+#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4)
-+#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5)
-+#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6)
-+#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7)
-+#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8)
-+#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9)
-+#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10)
-+#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11)
-+#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12)
-+#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13)
-+#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14)
-+#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15)
-+#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16)
-+#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17)
-+#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18)
-+#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19)
-+#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20)
-+#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21)
-+#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22)
-+#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23)
-+#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24)
-+#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25)
-+#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26)
-+#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27)
-+#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28)
-+#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29)
-+#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30)
-+#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31)
-+
-+#define ARM_IRQ2_BASE 32
-+#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0)
-+#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1)
-+#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2)
-+#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3)
-+#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4)
-+#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5)
-+#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6)
-+#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7)
-+#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8)
-+#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9)
-+#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10)
-+#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11)
-+#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12)
-+#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13)
-+#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14)
-+#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15)
-+#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16)
-+#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17)
-+#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18)
-+#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19)
-+#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20)
-+#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21)
-+#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22)
-+#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23)
-+#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24)
-+#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25)
-+#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26)
-+#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27)
-+#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28)
-+#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29)
-+#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30)
-+#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31)
-+
-+#define ARM_IRQ0_BASE 64
-+#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0)
-+#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1)
-+#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2)
-+#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3)
-+#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4)
-+#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5)
-+#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6)
-+#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7)
-+#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8)
-+#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9)
-+#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10)
-+#define INTERRUPT_USB (ARM_IRQ0_BASE + 11)
-+#define INTERRUPT_3D (ARM_IRQ0_BASE + 12)
-+#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13)
-+#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14)
-+#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15)
-+#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16)
-+#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17)
-+#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18)
-+#define INTERRUPT_UART (ARM_IRQ0_BASE + 19)
-+#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20)
-+
-+#define MAXIRQNUM (32 + 32 + 20)
-+#define MAXFIQNUM (32 + 32 + 20)
-+
-+#define MAX_TIMER 2
-+#define MAX_PERIOD 699050
-+#define TICKS_PER_uSEC 1
-+
-+/*
-+ * These are useconds NOT ticks.
-+ *
-+ */
-+#define mSEC_1 1000
-+#define mSEC_5 (mSEC_1 * 5)
-+#define mSEC_10 (mSEC_1 * 10)
-+#define mSEC_25 (mSEC_1 * 25)
-+#define SEC_1 (mSEC_1 * 1000)
-+
-+/*
-+ * Watchdog
-+ */
-+#define PM_RSTC (PM_BASE+0x1c)
-+#define PM_RSTS (PM_BASE+0x20)
-+#define PM_WDOG (PM_BASE+0x24)
-+
-+#define PM_WDOG_RESET 0000000000
-+#define PM_PASSWORD 0x5a000000
-+#define PM_WDOG_TIME_SET 0x000fffff
-+#define PM_RSTC_WRCFG_CLR 0xffffffcf
-+#define PM_RSTC_WRCFG_SET 0x00000030
-+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-+#define PM_RSTC_RESET 0x00000102
-+
-+#define PM_RSTS_HADPOR_SET 0x00001000
-+#define PM_RSTS_HADSRH_SET 0x00000400
-+#define PM_RSTS_HADSRF_SET 0x00000200
-+#define PM_RSTS_HADSRQ_SET 0x00000100
-+#define PM_RSTS_HADWRH_SET 0x00000040
-+#define PM_RSTS_HADWRF_SET 0x00000020
-+#define PM_RSTS_HADWRQ_SET 0x00000010
-+#define PM_RSTS_HADDRH_SET 0x00000004
-+#define PM_RSTS_HADDRF_SET 0x00000002
-+#define PM_RSTS_HADDRQ_SET 0x00000001
-+
-+#define UART0_CLOCK 3000000
-+
-+#endif
-+
-+/* END */
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/system.h
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/system.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <linux/io.h>
-+#include <mach/hardware.h>
-+#include <mach/platform.h>
-+
-+static inline void arch_idle(void)
-+{
-+ /*
-+ * This should do all the clock switching
-+ * and wait for interrupt tricks
-+ */
-+ cpu_do_idle();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/timex.h
-@@ -0,0 +1,23 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/timex.h
-+ *
-+ * BCM2708 sysem clock frequency
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#define CLOCK_TICK_RATE (1000000)
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/uncompress.h
-@@ -0,0 +1,84 @@
-+/*
-+ * arch/arm/mach-bcn2708/include/mach/uncompress.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/amba/serial.h>
-+#include <mach/hardware.h>
-+
-+#define UART_BAUD 115200
-+
-+#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR)
-+#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR)
-+#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD)
-+#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD)
-+#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH)
-+#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR)
-+
-+/*
-+ * This does not append a newline
-+ */
-+static inline void putc(int c)
-+{
-+ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF)
-+ barrier();
-+
-+ __raw_writel(c, BCM2708_UART_DR);
-+}
-+
-+static inline void flush(void)
-+{
-+ int fr;
-+
-+ do {
-+ fr = __raw_readl(BCM2708_UART_FR);
-+ barrier();
-+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
-+}
-+
-+static inline void arch_decomp_setup(void)
-+{
-+ int temp, div, rem, frac;
-+
-+ temp = 16 * UART_BAUD;
-+ div = UART0_CLOCK / temp;
-+ rem = UART0_CLOCK % temp;
-+ temp = (8 * rem) / UART_BAUD;
-+ frac = (temp >> 1) + (temp & 1);
-+
-+ /* Make sure the UART is disabled before we start */
-+ __raw_writel(0, BCM2708_UART_CR);
-+
-+ /* Set the baud rate */
-+ __raw_writel(div, BCM2708_UART_IBRD);
-+ __raw_writel(frac, BCM2708_UART_FBRD);
-+
-+ /* Set the UART to 8n1, FIFO enabled */
-+ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH);
-+
-+ /* Enable the UART */
-+ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
-+ BCM2708_UART_CR);
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/arch/arm/mach-bcm2708/include/mach/vmalloc.h
-@@ -0,0 +1,20 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#define VMALLOC_END (0xe8000000)
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/Kconfig
-@@ -0,0 +1,42 @@
-+menu "Broadcom BCM2709 Implementations"
-+ depends on ARCH_BCM2709
-+
-+config MACH_BCM2709
-+ bool "Broadcom BCM2709 Development Platform"
-+ help
-+ Include support for the Broadcom(R) BCM2709 platform.
-+
-+config BCM2709_DT
-+ bool "BCM2709 Device Tree support"
-+ depends on MACH_BCM2709
-+ default n
-+ select USE_OF
-+ select ARCH_REQUIRE_GPIOLIB
-+ select PINCTRL
-+ select PINCTRL_BCM2835
-+ help
-+ Enable Device Tree support for BCM2709
-+
-+config BCM2708_GPIO
-+ bool "BCM2709 gpio support"
-+ depends on MACH_BCM2709
-+ select ARCH_REQUIRE_GPIOLIB
-+ default y
-+ help
-+ Include support for the Broadcom(R) BCM2709 gpio.
-+
-+config BCM2708_NOL2CACHE
-+ bool "Videocore L2 cache disable"
-+ depends on MACH_BCM2709
-+ default y
-+ help
-+ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
-+
-+config BCM2708_SPIDEV
-+ bool "Bind spidev to SPI0 master"
-+ depends on MACH_BCM2709
-+ depends on SPI
-+ default y
-+ help
-+ Binds spidev driver to the SPI0 master
-+endmenu
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/Makefile
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+obj-$(CONFIG_MACH_BCM2709) += bcm2709.o armctrl.o
-+obj-$(CONFIG_BCM2708_GPIO) += bcm2708_gpio.o
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/Makefile.boot
-@@ -0,0 +1,3 @@
-+ zreladdr-y := 0x00008000
-+params_phys-y := 0x00000100
-+initrd_phys-y := 0x00800000
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/armctrl.c
-@@ -0,0 +1,361 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/armctrl.c
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/io.h>
-+#include <linux/version.h>
-+#include <linux/syscore_ops.h>
-+#include <linux/interrupt.h>
-+#include <linux/irqdomain.h>
-+#include <linux/of.h>
-+
-+#include <asm/mach/irq.h>
-+#include <mach/hardware.h>
-+#include "armctrl.h"
-+
-+/* For support of kernels >= 3.0 assume only one VIC for now*/
-+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = {
-+ INTERRUPT_VC_JPEG,
-+ INTERRUPT_VC_USB,
-+ INTERRUPT_VC_3D,
-+ INTERRUPT_VC_DMA2,
-+ INTERRUPT_VC_DMA3,
-+ INTERRUPT_VC_I2C,
-+ INTERRUPT_VC_SPI,
-+ INTERRUPT_VC_I2SPCM,
-+ INTERRUPT_VC_SDIO,
-+ INTERRUPT_VC_UART,
-+ INTERRUPT_VC_ARASANSDIO
-+};
-+
-+static void armctrl_mask_irq(struct irq_data *d)
-+{
-+ static const unsigned int disables[4] = {
-+ ARM_IRQ_DIBL1,
-+ ARM_IRQ_DIBL2,
-+ ARM_IRQ_DIBL3,
-+ 0
-+ };
-+ int i;
-+ if (d->irq >= FIQ_START) {
-+ writel(0, __io_address(ARM_IRQ_FAST));
-+ } else if (d->irq >= IRQ_ARM_LOCAL_CNTPSIRQ && d->irq < IRQ_ARM_LOCAL_CNTPSIRQ + 4) {
-+#if 1
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_CNTPSIRQ;
-+ for (i=0; i<4; i++) // i = raw_smp_processor_id(); //
-+ {
-+ unsigned int val = readl(__io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i));
-+ writel(val &~ (1 << data), __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i));
-+ }
-+#endif
-+ } else if (d->irq >= IRQ_ARM_LOCAL_MAILBOX0 && d->irq < IRQ_ARM_LOCAL_MAILBOX0 + 4) {
-+#if 0
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_MAILBOX0;
-+ for (i=0; i<4; i++) {
-+ unsigned int val = readl(__io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i));
-+ writel(val &~ (1 << data), __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i));
-+ }
-+#endif
-+ } else if (d->irq >= ARM_IRQ1_BASE && d->irq < ARM_IRQ_LOCAL_BASE) {
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
-+ writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3]));
-+ } else if (d->irq == INTERRUPT_ARM_LOCAL_PMU_FAST) {
-+ writel(0xf, __io_address(ARM_LOCAL_PM_ROUTING_CLR));
-+ } else { printk("%s: %d\n", __func__, d->irq); BUG(); }
-+}
-+
-+static void armctrl_unmask_irq(struct irq_data *d)
-+{
-+ static const unsigned int enables[4] = {
-+ ARM_IRQ_ENBL1,
-+ ARM_IRQ_ENBL2,
-+ ARM_IRQ_ENBL3,
-+ 0
-+ };
-+ int i;
-+ if (d->irq >= FIQ_START) {
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - FIQ_START;
-+ writel(0x80 | data, __io_address(ARM_IRQ_FAST));
-+ } else if (d->irq >= IRQ_ARM_LOCAL_CNTPSIRQ && d->irq < IRQ_ARM_LOCAL_CNTPSIRQ + 4) {
-+#if 1
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_CNTPSIRQ;
-+ for (i=0; i<4; i++) // i = raw_smp_processor_id();
-+ {
-+ unsigned int val = readl(__io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i));
-+ writel(val | (1 << data), __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i));
-+ }
-+#endif
-+ } else if (d->irq >= IRQ_ARM_LOCAL_MAILBOX0 && d->irq < IRQ_ARM_LOCAL_MAILBOX0 + 4) {
-+#if 0
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_MAILBOX0;
-+ for (i=0; i<4; i++) {
-+ unsigned int val = readl(__io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i));
-+ writel(val | (1 << data), __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i));
-+ }
-+#endif
-+ } else if (d->irq >= ARM_IRQ1_BASE && d->irq < ARM_IRQ_LOCAL_BASE) {
-+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
-+ writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3]));
-+ } else if (d->irq == INTERRUPT_ARM_LOCAL_PMU_FAST) {
-+ writel(0xf, __io_address(ARM_LOCAL_PM_ROUTING_SET));
-+ } else { printk("%s: %d\n", __func__, d->irq); BUG(); }
-+}
-+
-+#ifdef CONFIG_OF
-+
-+#define NR_IRQS_BANK0 21
-+#define NR_BANKS 4
-+#define IRQS_PER_BANK 32
-+
-+/* from drivers/irqchip/irq-bcm2835.c */
-+static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
-+ const u32 *intspec, unsigned int intsize,
-+ unsigned long *out_hwirq, unsigned int *out_type)
-+{
-+ if (WARN_ON(intsize != 2))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[0] >= NR_BANKS))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
-+ return -EINVAL;
-+
-+ if (WARN_ON(intspec[0] == 3 && intspec[1] > 3 && intspec[1] != 5 && intspec[1] != 9))
-+ return -EINVAL;
-+
-+ if (intspec[0] == 0)
-+ *out_hwirq = ARM_IRQ0_BASE + intspec[1];
-+ else if (intspec[0] == 1)
-+ *out_hwirq = ARM_IRQ1_BASE + intspec[1];
-+ else if (intspec[0] == 2)
-+ *out_hwirq = ARM_IRQ2_BASE + intspec[1];
-+ else
-+ *out_hwirq = ARM_IRQ_LOCAL_BASE + intspec[1];
-+
-+ /* reverse remap_irqs[] */
-+ switch (*out_hwirq) {
-+ case INTERRUPT_VC_JPEG:
-+ *out_hwirq = INTERRUPT_JPEG;
-+ break;
-+ case INTERRUPT_VC_USB:
-+ *out_hwirq = INTERRUPT_USB;
-+ break;
-+ case INTERRUPT_VC_3D:
-+ *out_hwirq = INTERRUPT_3D;
-+ break;
-+ case INTERRUPT_VC_DMA2:
-+ *out_hwirq = INTERRUPT_DMA2;
-+ break;
-+ case INTERRUPT_VC_DMA3:
-+ *out_hwirq = INTERRUPT_DMA3;
-+ break;
-+ case INTERRUPT_VC_I2C:
-+ *out_hwirq = INTERRUPT_I2C;
-+ break;
-+ case INTERRUPT_VC_SPI:
-+ *out_hwirq = INTERRUPT_SPI;
-+ break;
-+ case INTERRUPT_VC_I2SPCM:
-+ *out_hwirq = INTERRUPT_I2SPCM;
-+ break;
-+ case INTERRUPT_VC_SDIO:
-+ *out_hwirq = INTERRUPT_SDIO;
-+ break;
-+ case INTERRUPT_VC_UART:
-+ *out_hwirq = INTERRUPT_UART;
-+ break;
-+ case INTERRUPT_VC_ARASANSDIO:
-+ *out_hwirq = INTERRUPT_ARASANSDIO;
-+ break;
-+ }
-+
-+ *out_type = IRQ_TYPE_NONE;
-+ return 0;
-+}
-+
-+static struct irq_domain_ops armctrl_ops = {
-+ .xlate = armctrl_xlate
-+};
-+
-+void __init armctrl_dt_init(void)
-+{
-+ struct device_node *np;
-+ struct irq_domain *domain;
-+
-+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2708-armctrl-ic");
-+ if (!np)
-+ return;
-+
-+ domain = irq_domain_add_legacy(np, BCM2708_ALLOC_IRQS,
-+ IRQ_ARMCTRL_START, 0,
-+ &armctrl_ops, NULL);
-+ WARN_ON(!domain);
-+}
-+#else
-+void __init armctrl_dt_init(void) { }
-+#endif /* CONFIG_OF */
-+
-+#if defined(CONFIG_PM)
-+
-+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */
-+
-+/* Static defines
-+ * struct armctrl_device - VIC PM device (< 3.xx)
-+ * @sysdev: The system device which is registered. (< 3.xx)
-+ * @irq: The IRQ number for the base of the VIC.
-+ * @base: The register base for the VIC.
-+ * @resume_sources: A bitmask of interrupts for resume.
-+ * @resume_irqs: The IRQs enabled for resume.
-+ * @int_select: Save for VIC_INT_SELECT.
-+ * @int_enable: Save for VIC_INT_ENABLE.
-+ * @soft_int: Save for VIC_INT_SOFT.
-+ * @protect: Save for VIC_PROTECT.
-+ */
-+struct armctrl_info {
-+ void __iomem *base;
-+ int irq;
-+ u32 resume_sources;
-+ u32 resume_irqs;
-+ u32 int_select;
-+ u32 int_enable;
-+ u32 soft_int;
-+ u32 protect;
-+} armctrl;
-+
-+static int armctrl_suspend(void)
-+{
-+ return 0;
-+}
-+
-+static void armctrl_resume(void)
-+{
-+ return;
-+}
-+
-+/**
-+ * armctrl_pm_register - Register a VIC for later power management control
-+ * @base: The base address of the VIC.
-+ * @irq: The base IRQ for the VIC.
-+ * @resume_sources: bitmask of interrupts allowed for resume sources.
-+ *
-+ * For older kernels (< 3.xx) do -
-+ * Register the VIC with the system device tree so that it can be notified
-+ * of suspend and resume requests and ensure that the correct actions are
-+ * taken to re-instate the settings on resume.
-+ */
-+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq,
-+ u32 resume_sources)
-+{
-+ armctrl.base = base;
-+ armctrl.resume_sources = resume_sources;
-+ armctrl.irq = irq;
-+}
-+
-+static int armctrl_set_wake(struct irq_data *d, unsigned int on)
-+{
-+ unsigned int off = d->irq & 31;
-+ u32 bit = 1 << off;
-+
-+ if (!(bit & armctrl.resume_sources))
-+ return -EINVAL;
-+
-+ if (on)
-+ armctrl.resume_irqs |= bit;
-+ else
-+ armctrl.resume_irqs &= ~bit;
-+
-+ return 0;
-+}
-+
-+#else
-+static inline void armctrl_pm_register(void __iomem * base, unsigned int irq,
-+ u32 arg1)
-+{
-+}
-+
-+#define armctrl_suspend NULL
-+#define armctrl_resume NULL
-+#define armctrl_set_wake NULL
-+#endif /* CONFIG_PM */
-+
-+static struct syscore_ops armctrl_syscore_ops = {
-+ .suspend = armctrl_suspend,
-+ .resume = armctrl_resume,
-+};
-+
-+/**
-+ * armctrl_syscore_init - initicall to register VIC pm functions
-+ *
-+ * This is called via late_initcall() to register
-+ * the resources for the VICs due to the early
-+ * nature of the VIC's registration.
-+*/
-+static int __init armctrl_syscore_init(void)
-+{
-+ register_syscore_ops(&armctrl_syscore_ops);
-+ return 0;
-+}
-+
-+late_initcall(armctrl_syscore_init);
-+
-+static struct irq_chip armctrl_chip = {
-+ .name = "ARMCTRL",
-+ .irq_ack = NULL,
-+ .irq_mask = armctrl_mask_irq,
-+ .irq_unmask = armctrl_unmask_irq,
-+ .irq_set_wake = armctrl_set_wake,
-+};
-+
-+/**
-+ * armctrl_init - initialise a vectored interrupt controller
-+ * @base: iomem base address
-+ * @irq_start: starting interrupt number, must be muliple of 32
-+ * @armctrl_sources: bitmask of interrupt sources to allow
-+ * @resume_sources: bitmask of interrupt sources to allow for resume
-+ */
-+int __init armctrl_init(void __iomem * base, unsigned int irq_start,
-+ u32 armctrl_sources, u32 resume_sources)
-+{
-+ unsigned int irq;
-+
-+ for (irq = 0; irq < BCM2708_ALLOC_IRQS; irq++) {
-+ unsigned int data = irq;
-+ if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO)
-+ data = remap_irqs[irq - INTERRUPT_JPEG];
-+ if (irq >= IRQ_ARM_LOCAL_CNTPSIRQ && irq <= IRQ_ARM_LOCAL_TIMER) {
-+ irq_set_percpu_devid(irq);
-+ irq_set_chip_and_handler(irq, &armctrl_chip, handle_percpu_devid_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
-+ } else {
-+ irq_set_chip_and_handler(irq, &armctrl_chip, handle_level_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+ }
-+ irq_set_chip_data(irq, (void *)data);
-+ }
-+
-+ armctrl_pm_register(base, irq_start, resume_sources);
-+ init_FIQ(FIQ_START);
-+ armctrl_dt_init();
-+ return 0;
-+}
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/armctrl.h
-@@ -0,0 +1,27 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/armctrl.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_ARMCTRL_H
-+#define __BCM2708_ARMCTRL_H
-+
-+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start,
-+ u32 armctrl_sources, u32 resume_sources);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/bcm2708_gpio.c
-@@ -0,0 +1,426 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/spinlock.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/list.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <mach/gpio.h>
-+#include <linux/gpio.h>
-+#include <linux/platform_device.h>
-+#include <mach/platform.h>
-+#include <linux/pinctrl/consumer.h>
-+
-+#include <linux/platform_data/bcm2708.h>
-+
-+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
-+#define DRIVER_NAME BCM_GPIO_DRIVER_NAME
-+#define BCM_GPIO_USE_IRQ 1
-+
-+#define GPIOFSEL(x) (0x00+(x)*4)
-+#define GPIOSET(x) (0x1c+(x)*4)
-+#define GPIOCLR(x) (0x28+(x)*4)
-+#define GPIOLEV(x) (0x34+(x)*4)
-+#define GPIOEDS(x) (0x40+(x)*4)
-+#define GPIOREN(x) (0x4c+(x)*4)
-+#define GPIOFEN(x) (0x58+(x)*4)
-+#define GPIOHEN(x) (0x64+(x)*4)
-+#define GPIOLEN(x) (0x70+(x)*4)
-+#define GPIOAREN(x) (0x7c+(x)*4)
-+#define GPIOAFEN(x) (0x88+(x)*4)
-+#define GPIOUD(x) (0x94+(x)*4)
-+#define GPIOUDCLK(x) (0x98+(x)*4)
-+
-+#define GPIO_BANKS 2
-+
-+enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
-+ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
-+ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
-+ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
-+};
-+
-+ /* Each of the two spinlocks protects a different set of hardware
-+ * regiters and data structurs. This decouples the code of the IRQ from
-+ * the GPIO code. This also makes the case of a GPIO routine call from
-+ * the IRQ code simpler.
-+ */
-+static DEFINE_SPINLOCK(lock); /* GPIO registers */
-+
-+struct bcm2708_gpio {
-+ struct list_head list;
-+ void __iomem *base;
-+ struct gpio_chip gc;
-+ unsigned long rising[(BCM2708_NR_GPIOS + 31) / 32];
-+ unsigned long falling[(BCM2708_NR_GPIOS + 31) / 32];
-+ unsigned long high[(BCM2708_NR_GPIOS + 31) / 32];
-+ unsigned long low[(BCM2708_NR_GPIOS + 31) / 32];
-+};
-+
-+static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset,
-+ int function)
-+{
-+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
-+ unsigned long flags;
-+ unsigned gpiodir;
-+ unsigned gpio_bank = offset / 10;
-+ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
-+
-+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function);
-+ if (offset >= BCM2708_NR_GPIOS)
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&lock, flags);
-+
-+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
-+ gpiodir &= ~(7 << gpio_field_offset);
-+ gpiodir |= function << gpio_field_offset;
-+ writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank));
-+ spin_unlock_irqrestore(&lock, flags);
-+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
-+
-+ return 0;
-+}
-+
-+static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset)
-+{
-+ return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT);
-+}
-+
-+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
-+static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
-+ int value)
-+{
-+ int ret;
-+ ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT);
-+ if (ret >= 0)
-+ bcm2708_gpio_set(gc, offset, value);
-+ return ret;
-+}
-+
-+static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset)
-+{
-+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
-+ unsigned gpio_bank = offset / 32;
-+ unsigned gpio_field_offset = (offset - 32 * gpio_bank);
-+ unsigned lev;
-+
-+ if (offset >= BCM2708_NR_GPIOS)
-+ return 0;
-+ lev = readl(gpio->base + GPIOLEV(gpio_bank));
-+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset));
-+ return 0x1 & (lev >> gpio_field_offset);
-+}
-+
-+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
-+{
-+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
-+ unsigned gpio_bank = offset / 32;
-+ unsigned gpio_field_offset = (offset - 32 * gpio_bank);
-+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value);
-+ if (offset >= BCM2708_NR_GPIOS)
-+ return;
-+ if (value)
-+ writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank));
-+ else
-+ writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank));
-+}
-+
-+/**********************
-+ * extension to configure pullups
-+ */
-+int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset,
-+ bcm2708_gpio_pull_t value)
-+{
-+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
-+ unsigned gpio_bank = offset / 32;
-+ unsigned gpio_field_offset = (offset - 32 * gpio_bank);
-+
-+ if (offset >= BCM2708_NR_GPIOS)
-+ return -EINVAL;
-+
-+ switch (value) {
-+ case BCM2708_PULL_UP:
-+ writel(2, gpio->base + GPIOUD(0));
-+ break;
-+ case BCM2708_PULL_DOWN:
-+ writel(1, gpio->base + GPIOUD(0));
-+ break;
-+ case BCM2708_PULL_OFF:
-+ writel(0, gpio->base + GPIOUD(0));
-+ break;
-+ }
-+
-+ udelay(5);
-+ writel(1 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank));
-+ udelay(5);
-+ writel(0, gpio->base + GPIOUD(0));
-+ writel(0 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank));
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(bcm2708_gpio_setpull);
-+
-+/*************************************************************************************************************************
-+ * bcm2708 GPIO IRQ
-+ */
-+
-+#if BCM_GPIO_USE_IRQ
-+
-+static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+ return gpio_to_irq(gpio);
-+}
-+
-+static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type)
-+{
-+ unsigned irq = d->irq;
-+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
-+ unsigned gn = irq_to_gpio(irq);
-+ unsigned gb = gn / 32;
-+ unsigned go = gn % 32;
-+
-+ gpio->rising[gb] &= ~(1 << go);
-+ gpio->falling[gb] &= ~(1 << go);
-+ gpio->high[gb] &= ~(1 << go);
-+ gpio->low[gb] &= ~(1 << go);
-+
-+ if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+ return -EINVAL;
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ gpio->rising[gb] |= (1 << go);
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ gpio->falling[gb] |= (1 << go);
-+ if (type & IRQ_TYPE_LEVEL_HIGH)
-+ gpio->high[gb] |= (1 << go);
-+ if (type & IRQ_TYPE_LEVEL_LOW)
-+ gpio->low[gb] |= (1 << go);
-+ return 0;
-+}
-+
-+static void bcm2708_gpio_irq_mask(struct irq_data *d)
-+{
-+ unsigned irq = d->irq;
-+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
-+ unsigned gn = irq_to_gpio(irq);
-+ unsigned gb = gn / 32;
-+ unsigned long rising = readl(gpio->base + GPIOREN(gb));
-+ unsigned long falling = readl(gpio->base + GPIOFEN(gb));
-+ unsigned long high = readl(gpio->base + GPIOHEN(gb));
-+ unsigned long low = readl(gpio->base + GPIOLEN(gb));
-+
-+ gn = gn % 32;
-+
-+ writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
-+ writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
-+ writel(high & ~(1 << gn), gpio->base + GPIOHEN(gb));
-+ writel(low & ~(1 << gn), gpio->base + GPIOLEN(gb));
-+}
-+
-+static void bcm2708_gpio_irq_unmask(struct irq_data *d)
-+{
-+ unsigned irq = d->irq;
-+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
-+ unsigned gn = irq_to_gpio(irq);
-+ unsigned gb = gn / 32;
-+ unsigned go = gn % 32;
-+ unsigned long rising = readl(gpio->base + GPIOREN(gb));
-+ unsigned long falling = readl(gpio->base + GPIOFEN(gb));
-+ unsigned long high = readl(gpio->base + GPIOHEN(gb));
-+ unsigned long low = readl(gpio->base + GPIOLEN(gb));
-+
-+ if (gpio->rising[gb] & (1 << go)) {
-+ writel(rising | (1 << go), gpio->base + GPIOREN(gb));
-+ } else {
-+ writel(rising & ~(1 << go), gpio->base + GPIOREN(gb));
-+ }
-+
-+ if (gpio->falling[gb] & (1 << go)) {
-+ writel(falling | (1 << go), gpio->base + GPIOFEN(gb));
-+ } else {
-+ writel(falling & ~(1 << go), gpio->base + GPIOFEN(gb));
-+ }
-+
-+ if (gpio->high[gb] & (1 << go)) {
-+ writel(high | (1 << go), gpio->base + GPIOHEN(gb));
-+ } else {
-+ writel(high & ~(1 << go), gpio->base + GPIOHEN(gb));
-+ }
-+
-+ if (gpio->low[gb] & (1 << go)) {
-+ writel(low | (1 << go), gpio->base + GPIOLEN(gb));
-+ } else {
-+ writel(low & ~(1 << go), gpio->base + GPIOLEN(gb));
-+ }
-+}
-+
-+static struct irq_chip bcm2708_irqchip = {
-+ .name = "GPIO",
-+ .irq_enable = bcm2708_gpio_irq_unmask,
-+ .irq_disable = bcm2708_gpio_irq_mask,
-+ .irq_unmask = bcm2708_gpio_irq_unmask,
-+ .irq_mask = bcm2708_gpio_irq_mask,
-+ .irq_set_type = bcm2708_gpio_irq_set_type,
-+};
-+
-+static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long edsr;
-+ unsigned bank;
-+ int i;
-+ unsigned gpio;
-+ unsigned level_bits;
-+ struct bcm2708_gpio *gpio_data = dev_id;
-+
-+ for (bank = 0; bank < GPIO_BANKS; bank++) {
-+ edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank));
-+ level_bits = gpio_data->high[bank] | gpio_data->low[bank];
-+
-+ for_each_set_bit(i, &edsr, 32) {
-+ gpio = i + bank * 32;
-+ /* ack edge triggered IRQs immediately */
-+ if (!(level_bits & (1<<i)))
-+ writel(1<<i,
-+ __io_address(GPIO_BASE) + GPIOEDS(bank));
-+ generic_handle_irq(gpio_to_irq(gpio));
-+ /* ack level triggered IRQ after handling them */
-+ if (level_bits & (1<<i))
-+ writel(1<<i,
-+ __io_address(GPIO_BASE) + GPIOEDS(bank));
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction bcm2708_gpio_irq = {
-+ .name = "BCM2708 GPIO catchall handler",
-+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
-+ .handler = bcm2708_gpio_interrupt,
-+};
-+
-+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
-+{
-+ unsigned irq;
-+
-+ ucb->gc.to_irq = bcm2708_gpio_to_irq;
-+
-+ for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) {
-+ irq_set_chip_data(irq, ucb);
-+ irq_set_chip_and_handler(irq, &bcm2708_irqchip,
-+ handle_simple_irq);
-+ set_irq_flags(irq, IRQF_VALID);
-+ }
-+
-+ bcm2708_gpio_irq.dev_id = ucb;
-+ setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq);
-+}
-+
-+#else
-+
-+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
-+{
-+}
-+
-+#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */
-+
-+static int bcm2708_gpio_probe(struct platform_device *dev)
-+{
-+ struct bcm2708_gpio *ucb;
-+ struct resource *res;
-+ int bank;
-+ int err = 0;
-+
-+ printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev);
-+
-+ ucb = kzalloc(sizeof(*ucb), GFP_KERNEL);
-+ if (NULL == ucb) {
-+ printk(KERN_ERR DRIVER_NAME ": failed to allocate "
-+ "mailbox memory\n");
-+ err = -ENOMEM;
-+ goto err;
-+ }
-+
-+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+
-+ platform_set_drvdata(dev, ucb);
-+ ucb->base = __io_address(GPIO_BASE);
-+
-+ ucb->gc.label = "bcm2708_gpio";
-+ ucb->gc.base = 0;
-+ ucb->gc.ngpio = BCM2708_NR_GPIOS;
-+ ucb->gc.owner = THIS_MODULE;
-+
-+ ucb->gc.direction_input = bcm2708_gpio_dir_in;
-+ ucb->gc.direction_output = bcm2708_gpio_dir_out;
-+ ucb->gc.get = bcm2708_gpio_get;
-+ ucb->gc.set = bcm2708_gpio_set;
-+ ucb->gc.can_sleep = 0;
-+
-+ for (bank = 0; bank < GPIO_BANKS; bank++) {
-+ writel(0, ucb->base + GPIOREN(bank));
-+ writel(0, ucb->base + GPIOFEN(bank));
-+ writel(0, ucb->base + GPIOHEN(bank));
-+ writel(0, ucb->base + GPIOLEN(bank));
-+ writel(0, ucb->base + GPIOAREN(bank));
-+ writel(0, ucb->base + GPIOAFEN(bank));
-+ writel(~0, ucb->base + GPIOEDS(bank));
-+ }
-+
-+ bcm2708_gpio_irq_init(ucb);
-+
-+ err = gpiochip_add(&ucb->gc);
-+
-+err:
-+ return err;
-+
-+}
-+
-+static int bcm2708_gpio_remove(struct platform_device *dev)
-+{
-+ int err = 0;
-+ struct bcm2708_gpio *ucb = platform_get_drvdata(dev);
-+
-+ printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev);
-+
-+ gpiochip_remove(&ucb->gc);
-+
-+ platform_set_drvdata(dev, NULL);
-+ kfree(ucb);
-+
-+ return err;
-+}
-+
-+static struct platform_driver bcm2708_gpio_driver = {
-+ .probe = bcm2708_gpio_probe,
-+ .remove = bcm2708_gpio_remove,
-+ .driver = {
-+ .name = "bcm2708_gpio"},
-+};
-+
-+static int __init bcm2708_gpio_init(void)
-+{
-+ return platform_driver_register(&bcm2708_gpio_driver);
-+}
-+
-+static void __exit bcm2708_gpio_exit(void)
-+{
-+ platform_driver_unregister(&bcm2708_gpio_driver);
-+}
-+
-+module_init(bcm2708_gpio_init);
-+module_exit(bcm2708_gpio_exit);
-+
-+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/bcm2709.c
-@@ -0,0 +1,801 @@
-+/*
-+ * linux/arch/arm/mach-bcm2709/bcm2709.c
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <linux/syscore_ops.h>
-+#include <linux/interrupt.h>
-+#include <linux/amba/bus.h>
-+#include <linux/amba/clcd.h>
-+#include <linux/clk-provider.h>
-+#include <linux/clkdev.h>
-+#include <linux/clockchips.h>
-+#include <linux/cnt32_to_63.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/gpio/machine.h>
-+
-+#include <linux/version.h>
-+#include <linux/clkdev.h>
-+#include <asm/system_info.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/cputype.h>
-+#include <linux/sched_clock.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach/time.h>
-+#include <asm/mach/map.h>
-+
-+#include <mach/timex.h>
-+#include <mach/system.h>
-+
-+#include <linux/delay.h>
-+
-+#include "bcm2709.h"
-+#include "armctrl.h"
-+
-+#ifdef CONFIG_BCM_VC_CMA
-+#include <linux/broadcom/vc_cma.h>
-+#endif
-+
-+//#define SYSTEM_TIMER
-+
-+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to
-+ * give us IO access only to 64Mbytes of physical memory (26 bits). We could
-+ * represent this window by setting our dmamasks to 26 bits but, in fact
-+ * we're not going to use addresses outside this range (they're not in real
-+ * memory) so we don't bother.
-+ *
-+ * In the future we might include code to use this IOMMU to remap other
-+ * physical addresses onto VideoCore memory then the use of 32-bits would be
-+ * more legitimate.
-+ */
-+#define DMA_MASK_BITS_COMMON 32
-+
-+/* command line parameters */
-+static unsigned boardrev, serial;
-+static unsigned uart_clock = UART0_CLOCK;
-+static unsigned disk_led_gpio = 16;
-+static unsigned disk_led_active_low = 1;
-+static unsigned reboot_part = 0;
-+
-+static unsigned use_dt = 0;
-+
-+static void __init bcm2709_init_led(void);
-+
-+void __init bcm2709_init_irq(void)
-+{
-+ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0);
-+}
-+
-+static struct map_desc bcm2709_io_desc[] __initdata = {
-+ {
-+ .virtual = IO_ADDRESS(ARMCTRL_BASE),
-+ .pfn = __phys_to_pfn(ARMCTRL_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(UART0_BASE),
-+ .pfn = __phys_to_pfn(UART0_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(UART1_BASE),
-+ .pfn = __phys_to_pfn(UART1_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(DMA_BASE),
-+ .pfn = __phys_to_pfn(DMA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(MCORE_BASE),
-+ .pfn = __phys_to_pfn(MCORE_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(ST_BASE),
-+ .pfn = __phys_to_pfn(ST_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(USB_BASE),
-+ .pfn = __phys_to_pfn(USB_BASE),
-+ .length = SZ_128K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(PM_BASE),
-+ .pfn = __phys_to_pfn(PM_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(GPIO_BASE),
-+ .pfn = __phys_to_pfn(GPIO_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+ {
-+ .virtual = IO_ADDRESS(ARM_LOCAL_BASE),
-+ .pfn = __phys_to_pfn(ARM_LOCAL_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE},
-+};
-+
-+void __init bcm2709_map_io(void)
-+{
-+ iotable_init(bcm2709_io_desc, ARRAY_SIZE(bcm2709_io_desc));
-+}
-+
-+#ifdef SYSTEM_TIMER
-+
-+/* The STC is a free running counter that increments at the rate of 1MHz */
-+#define STC_FREQ_HZ 1000000
-+
-+static inline uint32_t timer_read(void)
-+{
-+ /* STC: a free running counter that increments at the rate of 1MHz */
-+ return readl(__io_address(ST_BASE + 0x04));
-+}
-+
-+static unsigned long bcm2709_read_current_timer(void)
-+{
-+ return timer_read();
-+}
-+
-+static u64 notrace bcm2709_read_sched_clock(void)
-+{
-+ return timer_read();
-+}
-+
-+static cycle_t clksrc_read(struct clocksource *cs)
-+{
-+ return timer_read();
-+}
-+
-+static struct clocksource clocksource_stc = {
-+ .name = "stc",
-+ .rating = 300,
-+ .read = clksrc_read,
-+ .mask = CLOCKSOURCE_MASK(32),
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+unsigned long frc_clock_ticks32(void)
-+{
-+ return timer_read();
-+}
-+
-+static void __init bcm2709_clocksource_init(void)
-+{
-+ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) {
-+ printk(KERN_ERR "timer: failed to initialize clock "
-+ "source %s\n", clocksource_stc.name);
-+ }
-+}
-+#endif
-+
-+struct clk __init *bcm2709_clk_register(const char *name, unsigned long fixed_rate)
-+{
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT,
-+ fixed_rate);
-+ if (IS_ERR(clk))
-+ pr_err("%s not registered\n", name);
-+
-+ return clk;
-+}
-+
-+void __init bcm2709_register_clkdev(struct clk *clk, const char *name)
-+{
-+ int ret;
-+
-+ ret = clk_register_clkdev(clk, NULL, name);
-+ if (ret)
-+ pr_err("%s alias not registered\n", name);
-+}
-+
-+void __init bcm2709_init_clocks(void)
-+{
-+ struct clk *clk;
-+
-+ clk = bcm2709_clk_register("uart0_clk", uart_clock);
-+ bcm2709_register_clkdev(clk, "dev:f1");
-+
-+ clk = bcm2709_clk_register("sdhost_clk", 250000000);
-+ bcm2709_register_clkdev(clk, "mmc-bcm2835.0");
-+ bcm2709_register_clkdev(clk, "bcm2708_spi.0");
-+ bcm2709_register_clkdev(clk, "bcm2708_i2c.0");
-+ bcm2709_register_clkdev(clk, "bcm2708_i2c.1");
-+}
-+
-+#define UART0_IRQ { IRQ_UART, 0 /*NO_IRQ*/ }
-+#define UART0_DMA { 15, 14 }
-+
-+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-+
-+static struct amba_device *amba_devs[] __initdata = {
-+ &uart0_device,
-+};
-+
-+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_fb_device = {
-+ .name = "bcm2708_fb",
-+ .id = -1, /* only one bcm2708_fb */
-+ .resource = NULL,
-+ .num_resources = 0,
-+ .dev = {
-+ .dma_mask = &fb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+static struct resource bcm2708_usb_resources[] = {
-+ [0] = {
-+ .start = USB_BASE,
-+ .end = USB_BASE + SZ_128K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = MPHI_BASE,
-+ .end = MPHI_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = {
-+ .start = IRQ_HOSTPORT,
-+ .end = IRQ_HOSTPORT,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [3] = {
-+ .start = IRQ_USB,
-+ .end = IRQ_USB,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ [4] = {
-+ .start = ARM_LOCAL_BASE,
-+ .end = ARM_LOCAL_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [5] = {
-+ .start = IRQ_ARM_LOCAL_MAILBOX1,
-+ .end = IRQ_ARM_LOCAL_MAILBOX1,
-+ .flags = IORESOURCE_IRQ
-+ },
-+};
-+
-+
-+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_usb_device = {
-+ .name = "bcm2708_usb",
-+ .id = -1, /* only one bcm2708_usb */
-+ .resource = bcm2708_usb_resources,
-+ .num_resources = ARRAY_SIZE(bcm2708_usb_resources),
-+ .dev = {
-+ .dma_mask = &usb_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+static struct resource bcm2708_vcio_resources[] = {
-+ {
-+ .start = ARMCTRL_0_MAIL0_BASE,
-+ .end = ARMCTRL_0_MAIL0_BASE + SZ_64 - 1,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = IRQ_ARM_MAILBOX,
-+ .end = IRQ_ARM_MAILBOX,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
-+
-+static struct platform_device bcm2708_vcio_device = {
-+ .name = "bcm2708_vcio",
-+ .id = -1, /* only one VideoCore I/O area */
-+ .resource = bcm2708_vcio_resources,
-+ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources),
-+ .dev = {
-+ .dma_mask = &vcio_dmamask,
-+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
-+ },
-+};
-+
-+int __init bcm_register_device(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = platform_device_register(pdev);
-+ if (ret)
-+ pr_debug("Unable to register platform device '%s': %d\n",
-+ pdev->name, ret);
-+
-+ return ret;
-+}
-+
-+/*
-+ * Use these macros for platform and i2c devices that are present in the
-+ * Device Tree. This way the devices are only added on non-DT systems.
-+ */
-+#define bcm_register_device_dt(pdev) \
-+ if (!use_dt) bcm_register_device(pdev)
-+
-+#define i2c_register_board_info_dt(busnum, info, n) \
-+ if (!use_dt) i2c_register_board_info(busnum, info, n)
-+
-+int calc_rsts(int partition)
-+{
-+ return PM_PASSWORD |
-+ ((partition & (1 << 0)) << 0) |
-+ ((partition & (1 << 1)) << 1) |
-+ ((partition & (1 << 2)) << 2) |
-+ ((partition & (1 << 3)) << 3) |
-+ ((partition & (1 << 4)) << 4) |
-+ ((partition & (1 << 5)) << 5);
-+}
-+
-+static void bcm2709_restart(enum reboot_mode mode, const char *cmd)
-+{
-+ extern char bcm2708_reboot_mode;
-+ uint32_t pm_rstc, pm_wdog;
-+ uint32_t timeout = 10;
-+ uint32_t pm_rsts = 0;
-+
-+ if(bcm2708_reboot_mode == 'q')
-+ {
-+ // NOOBS < 1.3 booting with reboot=q
-+ pm_rsts = readl(__io_address(PM_RSTS));
-+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET;
-+ }
-+ else if(bcm2708_reboot_mode == 'p')
-+ {
-+ // NOOBS < 1.3 halting
-+ pm_rsts = readl(__io_address(PM_RSTS));
-+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET;
-+ }
-+ else
-+ {
-+ pm_rsts = calc_rsts(reboot_part);
-+ }
-+
-+ writel(pm_rsts, __io_address(PM_RSTS));
-+
-+ /* Setup watchdog for reset */
-+ pm_rstc = readl(__io_address(PM_RSTC));
-+
-+ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0)
-+ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET;
-+
-+ writel(pm_wdog, __io_address(PM_WDOG));
-+ writel(pm_rstc, __io_address(PM_RSTC));
-+}
-+
-+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */
-+static void bcm2709_power_off(void)
-+{
-+ extern char bcm2708_reboot_mode;
-+ if(bcm2708_reboot_mode == 'q')
-+ {
-+ // NOOBS < v1.3
-+ bcm2709_restart('p', "");
-+ }
-+ else
-+ {
-+ /* partition 63 is special code for HALT the bootloader knows not to boot*/
-+ reboot_part = 63;
-+ /* continue with normal reset mechanism */
-+ bcm2709_restart(0, "");
-+ }
-+}
-+
-+static void __init bcm2709_init_uart1(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart");
-+ if (of_device_is_available(np)) {
-+ pr_info("bcm2709: Mini UART enabled\n");
-+ writel(1, __io_address(UART1_BASE + 0x4));
-+ }
-+}
-+
-+#ifdef CONFIG_OF
-+static void __init bcm2709_dt_init(void)
-+{
-+ int ret;
-+
-+ of_clk_init(NULL);
-+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-+ if (ret) {
-+ pr_err("of_platform_populate failed: %d\n", ret);
-+ /* Proceed as if CONFIG_OF was not defined */
-+ } else {
-+ use_dt = 1;
-+ }
-+}
-+#else
-+static void __init bcm2709_dt_init(void) { }
-+#endif /* CONFIG_OF */
-+
-+void __init bcm2709_init(void)
-+{
-+ int i;
-+
-+#if defined(CONFIG_BCM_VC_CMA)
-+ vc_cma_early_init();
-+#endif
-+ printk("bcm2709.uart_clock = %d\n", uart_clock);
-+ pm_power_off = bcm2709_power_off;
-+
-+ bcm2709_init_clocks();
-+ bcm2709_dt_init();
-+
-+ bcm_register_device(&bcm2708_vcio_device);
-+#ifdef CONFIG_BCM2708_GPIO
-+ bcm_register_device_dt(&bcm2708_gpio_device);
-+#endif
-+ bcm_register_device_dt(&bcm2708_fb_device);
-+ bcm_register_device_dt(&bcm2708_usb_device);
-+
-+ bcm2708_init_led();
-+ bcm2708_init_uart1();
-+
-+ if (!use_dt) {
-+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-+ struct amba_device *d = amba_devs[i];
-+ amba_device_register(d, &iomem_resource);
-+ }
-+ }
-+ system_rev = boardrev;
-+ system_serial_low = serial;
-+}
-+
-+#ifdef SYSTEM_TIMER
-+static void timer_set_mode(enum clock_event_mode mode,
-+ struct clock_event_device *clk)
-+{
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ break;
-+ case CLOCK_EVT_MODE_PERIODIC:
-+
-+ case CLOCK_EVT_MODE_UNUSED:
-+ case CLOCK_EVT_MODE_RESUME:
-+
-+ default:
-+ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n",
-+ (int)mode);
-+ break;
-+ }
-+
-+}
-+
-+static int timer_set_next_event(unsigned long cycles,
-+ struct clock_event_device *unused)
-+{
-+ unsigned long stc;
-+ do {
-+ stc = readl(__io_address(ST_BASE + 0x04));
-+ /* We could take a FIQ here, which may push ST above STC3 */
-+ writel(stc + cycles, __io_address(ST_BASE + 0x18));
-+ } while ((signed long) cycles >= 0 &&
-+ (signed long) (readl(__io_address(ST_BASE + 0x04)) - stc)
-+ >= (signed long) cycles);
-+ return 0;
-+}
-+
-+static struct clock_event_device timer0_clockevent = {
-+ .name = "timer0",
-+ .shift = 32,
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .set_mode = timer_set_mode,
-+ .set_next_event = timer_set_next_event,
-+};
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t bcm2709_timer_interrupt(int irq, void *dev_id)
-+{
-+ struct clock_event_device *evt = &timer0_clockevent;
-+
-+ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */
-+
-+ evt->event_handler(evt);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction bcm2709_timer_irq = {
-+ .name = "BCM2709 Timer Tick",
-+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
-+ .handler = bcm2709_timer_interrupt,
-+};
-+
-+/*
-+ * Set up timer interrupt, and return the current time in seconds.
-+ */
-+
-+static struct delay_timer bcm2709_delay_timer = {
-+ .read_current_timer = bcm2709_read_current_timer,
-+ .freq = STC_FREQ_HZ,
-+};
-+
-+static void __init bcm2709_timer_init(void)
-+{
-+ /* init high res timer */
-+ bcm2709_clocksource_init();
-+
-+ /*
-+ * Make irqs happen for the system timer
-+ */
-+ setup_irq(IRQ_TIMER3, &bcm2709_timer_irq);
-+
-+ sched_clock_register(bcm2709_read_sched_clock, 32, STC_FREQ_HZ);
-+
-+ timer0_clockevent.mult =
-+ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift);
-+ timer0_clockevent.max_delta_ns =
-+ clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-+ timer0_clockevent.min_delta_ns =
-+ clockevent_delta2ns(0xf, &timer0_clockevent);
-+
-+ timer0_clockevent.cpumask = cpumask_of(0);
-+ clockevents_register_device(&timer0_clockevent);
-+
-+ register_current_timer_delay(&bcm2709_delay_timer);
-+}
-+
-+#else
-+
-+static void __init bcm2709_timer_init(void)
-+{
-+ extern void dc4_arch_timer_init(void);
-+ // timer control
-+ writel(0, __io_address(ARM_LOCAL_CONTROL));
-+ // timer pre_scaler
-+ writel(0x80000000, __io_address(ARM_LOCAL_PRESCALER)); // 19.2MHz
-+ //writel(0x06AAAAAB, __io_address(ARM_LOCAL_PRESCALER)); // 1MHz
-+
-+ if (use_dt)
-+ {
-+ of_clk_init(NULL);
-+ clocksource_of_init();
-+ }
-+ else
-+ dc4_arch_timer_init();
-+}
-+
-+#endif
-+
-+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-+#include <linux/leds.h>
-+
-+static struct gpio_led bcm2709_leds[] = {
-+ [0] = {
-+ .gpio = 16,
-+ .name = "led0",
-+ .default_trigger = "mmc0",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data bcm2709_led_pdata = {
-+ .num_leds = ARRAY_SIZE(bcm2709_leds),
-+ .leds = bcm2709_leds,
-+};
-+
-+static struct platform_device bcm2709_led_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &bcm2709_led_pdata,
-+ },
-+};
-+
-+static void __init bcm2709_init_led(void)
-+{
-+ bcm2709_leds[0].gpio = disk_led_gpio;
-+ bcm2709_leds[0].active_low = disk_led_active_low;
-+ bcm_register_device_dt(&bcm2709_led_device);
-+}
-+#else
-+static inline void bcm2709_init_led(void)
-+{
-+}
-+#endif
-+
-+void __init bcm2709_init_early(void)
-+{
-+ /*
-+ * Some devices allocate their coherent buffers from atomic
-+ * context. Increase size of atomic coherent pool to make sure such
-+ * the allocations won't fail.
-+ */
-+ init_dma_coherent_pool_size(SZ_4M);
-+}
-+
-+static void __init board_reserve(void)
-+{
-+#if defined(CONFIG_BCM_VC_CMA)
-+ vc_cma_reserve();
-+#endif
-+}
-+
-+
-+#ifdef CONFIG_SMP
-+#include <linux/smp.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/cacheflush.h>
-+#include <asm/smp_plat.h>
-+int dc4=0;
-+//void dc4_log(unsigned x) { if (dc4) writel((x), __io_address(ST_BASE+10 + raw_smp_processor_id()*4)); }
-+void dc4_log_dead(unsigned x) { if (dc4) writel((readl(__io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)) & 0xffff) | ((x)<<16), __io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)); }
-+
-+static void bcm2835_send_doorbell(const struct cpumask *mask, unsigned int irq)
-+{
-+ int cpu;
-+ /*
-+ * Ensure that stores to Normal memory are visible to the
-+ * other CPUs before issuing the IPI.
-+ */
-+ dsb();
-+
-+ /* Convert our logical CPU mask into a physical one. */
-+ for_each_cpu(cpu, mask)
-+ {
-+ /* submit softirq */
-+ writel(1<<irq, __io_address(ARM_LOCAL_MAILBOX0_SET0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0)));
-+ }
-+}
-+
-+void __init bcm2709_smp_init_cpus(void)
-+{
-+ void secondary_startup(void);
-+ unsigned int i, ncores;
-+
-+ ncores = 4; // xxx scu_get_core_count(NULL);
-+ printk("[%s] enter (%x->%x)\n", __FUNCTION__, (unsigned)virt_to_phys((void *)secondary_startup), (unsigned)__io_address(ST_BASE + 0x10));
-+ printk("[%s] ncores=%d\n", __FUNCTION__, ncores);
-+
-+ for (i = 0; i < ncores; i++) {
-+ set_cpu_possible(i, true);
-+ /* enable IRQ (not FIQ) */
-+ writel(0x1, __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 0x4 * i));
-+ //writel(0xf, __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 0x4 * i));
-+ }
-+ set_smp_cross_call(bcm2835_send_doorbell);
-+}
-+
-+/*
-+ * for arch/arm/kernel/smp.c:smp_prepare_cpus(unsigned int max_cpus)
-+ */
-+void __init bcm2709_smp_prepare_cpus(unsigned int max_cpus)
-+{
-+ //void __iomem *scu_base;
-+
-+ printk("[%s] enter\n", __FUNCTION__);
-+ //scu_base = scu_base_addr();
-+ //scu_enable(scu_base);
-+}
-+
-+/*
-+ * for linux/arch/arm/kernel/smp.c:secondary_start_kernel(void)
-+ */
-+void __cpuinit bcm2709_secondary_init(unsigned int cpu)
-+{
-+ printk("[%s] enter cpu:%d\n", __FUNCTION__, cpu);
-+ //gic_secondary_init(0);
-+}
-+
-+/*
-+ * for linux/arch/arm/kernel/smp.c:__cpu_up(..)
-+ */
-+int __cpuinit bcm2709_boot_secondary(unsigned int cpu, struct task_struct *idle)
-+{
-+ void secondary_startup(void);
-+ void *mbox_set = __io_address(ARM_LOCAL_MAILBOX3_SET0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0));
-+ void *mbox_clr = __io_address(ARM_LOCAL_MAILBOX3_CLR0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0));
-+ unsigned secondary_boot = (unsigned)virt_to_phys((void *)secondary_startup);
-+ int timeout=20;
-+ unsigned t = -1;
-+ //printk("[%s] enter cpu:%d (%x->%p) %x\n", __FUNCTION__, cpu, secondary_boot, wake, readl(wake));
-+
-+ dsb();
-+ BUG_ON(readl(mbox_clr) != 0);
-+ writel(secondary_boot, mbox_set);
-+
-+ while (--timeout > 0) {
-+ t = readl(mbox_clr);
-+ if (t == 0) break;
-+ cpu_relax();
-+ }
-+ if (timeout==0)
-+ printk("[%s] cpu:%d failed to start (%x)\n", __FUNCTION__, cpu, t);
-+ else
-+ printk("[%s] cpu:%d started (%x) %d\n", __FUNCTION__, cpu, t, timeout);
-+
-+ return 0;
-+}
-+
-+
-+struct smp_operations bcm2709_smp_ops __initdata = {
-+ .smp_init_cpus = bcm2709_smp_init_cpus,
-+ .smp_prepare_cpus = bcm2709_smp_prepare_cpus,
-+ .smp_secondary_init = bcm2709_secondary_init,
-+ .smp_boot_secondary = bcm2709_boot_secondary,
-+};
-+#endif
-+
-+static const char * const bcm2709_compat[] = {
-+ "brcm,bcm2709",
-+ "brcm,bcm2708", /* Could use bcm2708 in a pinch */
-+ NULL
-+};
-+
-+MACHINE_START(BCM2709, "BCM2709")
-+ /* Maintainer: Broadcom Europe Ltd. */
-+#ifdef CONFIG_SMP
-+ .smp = smp_ops(bcm2709_smp_ops),
-+#endif
-+ .map_io = bcm2709_map_io,
-+ .init_irq = bcm2709_init_irq,
-+ .init_time = bcm2709_timer_init,
-+ .init_machine = bcm2709_init,
-+ .init_early = bcm2709_init_early,
-+ .reserve = board_reserve,
-+ .restart = bcm2709_restart,
-+ .dt_compat = bcm2709_compat,
-+MACHINE_END
-+
-+MACHINE_START(BCM2708, "BCM2709")
-+ /* Maintainer: Broadcom Europe Ltd. */
-+#ifdef CONFIG_SMP
-+ .smp = smp_ops(bcm2709_smp_ops),
-+#endif
-+ .map_io = bcm2709_map_io,
-+ .init_irq = bcm2709_init_irq,
-+ .init_time = bcm2709_timer_init,
-+ .init_machine = bcm2709_init,
-+ .init_early = bcm2709_init_early,
-+ .reserve = board_reserve,
-+ .restart = bcm2709_restart,
-+ .dt_compat = bcm2709_compat,
-+MACHINE_END
-+
-+module_param(boardrev, uint, 0644);
-+module_param(serial, uint, 0644);
-+module_param(uart_clock, uint, 0644);
-+module_param(disk_led_gpio, uint, 0644);
-+module_param(disk_led_active_low, uint, 0644);
-+module_param(reboot_part, uint, 0644);
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/bcm2709.h
-@@ -0,0 +1,49 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/bcm2708.h
-+ *
-+ * BCM2708 machine support header
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_BCM2708_H
-+#define __BCM2708_BCM2708_H
-+
-+#include <linux/amba/bus.h>
-+
-+extern void __init bcm2708_init(void);
-+extern void __init bcm2708_init_irq(void);
-+extern void __init bcm2708_map_io(void);
-+extern struct sys_timer bcm2708_timer;
-+extern unsigned int mmc_status(struct device *dev);
-+
-+#define AMBA_DEVICE(name, busid, base, plat) \
-+static struct amba_device name##_device = { \
-+ .dev = { \
-+ .coherent_dma_mask = ~0, \
-+ .init_name = busid, \
-+ .platform_data = plat, \
-+ }, \
-+ .res = { \
-+ .start = base##_BASE, \
-+ .end = (base##_BASE) + SZ_4K - 1,\
-+ .flags = IORESOURCE_MEM, \
-+ }, \
-+ .irq = base##_IRQ, \
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/delay.S
-@@ -0,0 +1,21 @@
-+/*
-+ * linux/arch/arm/lib/delay.S
-+ *
-+ * Copyright (C) 1995, 1996 Russell King
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/param.h>
-+
-+ .text
-+.align 3 @ 8 byte alignment seems to be needed to avoid fetching stalls
-+@ Delay routine
-+ENTRY(bcm2708_delay)
-+ subs r0, r0, #1
-+ bhi bcm2708_delay
-+ mov pc, lr
-+ENDPROC(bcm2708_delay)
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/arm_control.h
-@@ -0,0 +1,493 @@
-+/*
-+ * linux/arch/arm/mach-bcm2708/arm_control.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __BCM2708_ARM_CONTROL_H
-+#define __BCM2708_ARM_CONTROL_H
-+
-+/*
-+ * Definitions and addresses for the ARM CONTROL logic
-+ * This file is manually generated.
-+ */
-+
-+#define ARM_BASE 0x7E00B000
-+
-+/* Basic configuration */
-+#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000)
-+#define ARM_C0_SIZ128M 0x00000000
-+#define ARM_C0_SIZ256M 0x00000001
-+#define ARM_C0_SIZ512M 0x00000002
-+#define ARM_C0_SIZ1G 0x00000003
-+#define ARM_C0_BRESP0 0x00000000
-+#define ARM_C0_BRESP1 0x00000004
-+#define ARM_C0_BRESP2 0x00000008
-+#define ARM_C0_BOOTHI 0x00000010
-+#define ARM_C0_UNUSED05 0x00000020 /* free */
-+#define ARM_C0_FULLPERI 0x00000040
-+#define ARM_C0_UNUSED78 0x00000180 /* free */
-+#define ARM_C0_JTAGMASK 0x00000E00
-+#define ARM_C0_JTAGOFF 0x00000000
-+#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */
-+#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */
-+#define ARM_C0_APROTMSK 0x0000F000
-+#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */
-+#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */
-+#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */
-+#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */
-+#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */
-+#define ARM_C0_PRIO_L2 0x0F000000
-+#define ARM_C0_PRIO_UC 0xF0000000
-+
-+#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */
-+#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */
-+#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */
-+
-+
-+#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440)
-+#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */
-+#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */
-+#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */
-+#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */
-+#define ARM_C1_PERSON 0x00000100 /* peripherals on */
-+#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */
-+
-+#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444)
-+#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */
-+#define ARM_S_READPEND 0x000003FF /* pending reads counter */
-+#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */
-+
-+#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448)
-+#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */
-+#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */
-+#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */
-+#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */
-+#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */
-+#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */
-+
-+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C)
-+#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C)
-+#define ARM_IDVAL 0x364D5241
-+
-+/* Translation memory */
-+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100)
-+/* 32 locations: 0x100.. 0x17F */
-+/* 32 spare means we CAN go to 64 pages.... */
-+
-+
-+/* Interrupts */
-+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */
-+#define ARM_I0_TIMER 0x00000001 /* timer IRQ */
-+#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */
-+#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */
-+#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */
-+#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */
-+#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */
-+
-+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */
-+/* todo: all I1_interrupt sources */
-+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */
-+/* todo: all I2_interrupt sources */
-+
-+#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */
-+#define ARM_IF_INDEX 0x0000007F /* FIQ select */
-+#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */
-+#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */
-+#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */
-+#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */
-+#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */
-+#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */
-+#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */
-+#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */
-+#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */
-+
-+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */
-+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */
-+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */
-+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */
-+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */
-+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */
-+#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */
-+#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */
-+#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */
-+#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */
-+#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */
-+#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */
-+#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */
-+
-+/* Timer */
-+/* For reg. fields see sp804 spec. */
-+#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400)
-+#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404)
-+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408)
-+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C)
-+#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410)
-+#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414)
-+#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418)
-+#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c)
-+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420)
-+
-+#define TIMER_CTRL_ONESHOT (1 << 0)
-+#define TIMER_CTRL_32BIT (1 << 1)
-+#define TIMER_CTRL_DIV1 (0 << 2)
-+#define TIMER_CTRL_DIV16 (1 << 2)
-+#define TIMER_CTRL_DIV256 (2 << 2)
-+#define TIMER_CTRL_IE (1 << 5)
-+#define TIMER_CTRL_PERIODIC (1 << 6)
-+#define TIMER_CTRL_ENABLE (1 << 7)
-+#define TIMER_CTRL_DBGHALT (1 << 8)
-+#define TIMER_CTRL_ENAFREE (1 << 9)
-+#define TIMER_CTRL_FREEDIV_SHIFT 16)
-+#define TIMER_CTRL_FREEDIV_MASK 0xff
-+
-+/* Semaphores, Doorbells, Mailboxes */
-+#define ARM_SBM_OWN0 (ARM_BASE+0x800)
-+#define ARM_SBM_OWN1 (ARM_BASE+0x900)
-+#define ARM_SBM_OWN2 (ARM_BASE+0xA00)
-+#define ARM_SBM_OWN3 (ARM_BASE+0xB00)
-+
-+/* MAILBOXES
-+ * Register flags are common across all
-+ * owner registers. See end of this section
-+ *
-+ * Semaphores, Doorbells, Mailboxes Owner 0
-+ *
-+ */
-+
-+#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
-+#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
-+#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04)
-+#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08)
-+#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C)
-+#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10)
-+#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14)
-+#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18)
-+#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C)
-+#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40)
-+#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44)
-+#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48)
-+#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C)
-+/* MAILBOX 0 access in Owner 0 area */
-+/* Some addresses should ONLY be used by owner 0 */
-+#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */
-+#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */
-+#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */
-+#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */
-+#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */
-+#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */
-+/* MAILBOX 1 access in Owner 0 area */
-+/* Owner 0 should only WRITE to this mailbox */
-+#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */
-+/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */
-+#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */
-+#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */
-+#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 1 */
-+#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
-+#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
-+#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04)
-+#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08)
-+#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C)
-+#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10)
-+#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14)
-+#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18)
-+#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C)
-+#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40)
-+#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44)
-+#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48)
-+#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C)
-+/* MAILBOX 0 access in Owner 0 area */
-+/* Owner 1 should only WRITE to this mailbox */
-+#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */
-+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 0 area */
-+#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */
-+#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */
-+#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */
-+#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */
-+#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */
-+#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC)
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */
-+#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */
-+#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */
-+#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 2 */
-+#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
-+#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
-+#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04)
-+#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08)
-+#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C)
-+#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10)
-+#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14)
-+#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18)
-+#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C)
-+#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40)
-+#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44)
-+#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48)
-+#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C)
-+/* MAILBOX 0 access in Owner 2 area */
-+/* Owner 2 should only WRITE to this mailbox */
-+#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */
-+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 2 area */
-+/* Owner 2 should only WRITE to this mailbox */
-+#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */
-+/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */
-+#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */
-+#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */
-+#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */
-+
-+/* Semaphores, Doorbells, Mailboxes Owner 3 */
-+#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
-+#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
-+#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04)
-+#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08)
-+#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C)
-+#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10)
-+#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14)
-+#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18)
-+#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C)
-+#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40)
-+#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44)
-+#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48)
-+#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C)
-+/* MAILBOX 0 access in Owner 3 area */
-+/* Owner 3 should only WRITE to this mailbox */
-+#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */
-+/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */
-+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */
-+/* MAILBOX 1 access in Owner 3 area */
-+/* Owner 3 should only WRITE to this mailbox */
-+#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */
-+/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */
-+/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */
-+#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */
-+/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */
-+/* General SEM, BELL, MAIL config/status */
-+#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */
-+#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */
-+#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */
-+#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */
-+
-+
-+
-+/* Mailbox flags. Valid for all owners */
-+
-+/* Mailbox status register (...0x98) */
-+#define ARM_MS_FULL 0x80000000
-+#define ARM_MS_EMPTY 0x40000000
-+#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */
-+
-+/* MAILBOX config/status register (...0x9C) */
-+/* ANY write to this register clears the error bits! */
-+#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */
-+#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */
-+#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */
-+#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */
-+#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */
-+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */
-+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */
-+/* Bit 7 is unused */
-+#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */
-+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */
-+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */
-+
-+/* Semaphore clear/debug register (...0xE0) */
-+#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */
-+#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */
-+#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */
-+#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */
-+#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */
-+#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */
-+#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */
-+#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */
-+#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */
-+#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */
-+#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */
-+#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */
-+#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */
-+#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */
-+#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */
-+#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */
-+
-+/* Doorbells clear/debug register (...0xE4) */
-+#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */
-+#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */
-+#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */
-+#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */
-+#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */
-+#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */
-+#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */
-+#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */
-+
-+/* MY IRQS register (...0xF8) */
-+#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */
-+#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */
-+
-+/* ALL IRQS register (...0xF8) */
-+#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */
-+#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */
-+#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */
-+#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */
-+#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */
-+#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */
-+#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */
-+#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */
-+#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */
-+#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */
-+/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */
-+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */
-+/* */
-+/* ARM JTAG BASH */
-+/* */
-+#define AJB_BASE 0x7e2000c0
-+
-+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00)
-+#define AJB_BITS0 0x000000
-+#define AJB_BITS4 0x000004
-+#define AJB_BITS8 0x000008
-+#define AJB_BITS12 0x00000C
-+#define AJB_BITS16 0x000010
-+#define AJB_BITS20 0x000014
-+#define AJB_BITS24 0x000018
-+#define AJB_BITS28 0x00001C
-+#define AJB_BITS32 0x000020
-+#define AJB_BITS34 0x000022
-+#define AJB_OUT_MS 0x000040
-+#define AJB_OUT_LS 0x000000
-+#define AJB_INV_CLK 0x000080
-+#define AJB_D0_RISE 0x000100
-+#define AJB_D0_FALL 0x000000
-+#define AJB_D1_RISE 0x000200
-+#define AJB_D1_FALL 0x000000
-+#define AJB_IN_RISE 0x000400
-+#define AJB_IN_FALL 0x000000
-+#define AJB_ENABLE 0x000800
-+#define AJB_HOLD0 0x000000
-+#define AJB_HOLD1 0x001000
-+#define AJB_HOLD2 0x002000
-+#define AJB_HOLD3 0x003000
-+#define AJB_RESETN 0x004000
-+#define AJB_CLKSHFT 16
-+#define AJB_BUSY 0x80000000
-+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04)
-+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08)
-+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
-+
-+#define ARM_LOCAL_BASE 0x40000000
-+#define ARM_LOCAL_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x000)
-+#define ARM_LOCAL_PRESCALER HW_REGISTER_RW(ARM_LOCAL_BASE+0x008)
-+#define ARM_LOCAL_GPU_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x00C)
-+#define ARM_LOCAL_PM_ROUTING_SET HW_REGISTER_RW(ARM_LOCAL_BASE+0x010)
-+#define ARM_LOCAL_PM_ROUTING_CLR HW_REGISTER_RW(ARM_LOCAL_BASE+0x014)
-+#define ARM_LOCAL_TIMER_LS HW_REGISTER_RW(ARM_LOCAL_BASE+0x01C)
-+#define ARM_LOCAL_TIMER_MS HW_REGISTER_RW(ARM_LOCAL_BASE+0x020)
-+#define ARM_LOCAL_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x024)
-+#define ARM_LOCAL_AXI_COUNT HW_REGISTER_RW(ARM_LOCAL_BASE+0x02C)
-+#define ARM_LOCAL_AXI_IRQ HW_REGISTER_RW(ARM_LOCAL_BASE+0x030)
-+#define ARM_LOCAL_TIMER_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x034)
-+#define ARM_LOCAL_TIMER_WRITE HW_REGISTER_RW(ARM_LOCAL_BASE+0x038)
-+
-+#define ARM_LOCAL_TIMER_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x040)
-+#define ARM_LOCAL_TIMER_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x044)
-+#define ARM_LOCAL_TIMER_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x048)
-+#define ARM_LOCAL_TIMER_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x04C)
-+
-+#define ARM_LOCAL_MAILBOX_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x050)
-+#define ARM_LOCAL_MAILBOX_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x054)
-+#define ARM_LOCAL_MAILBOX_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x058)
-+#define ARM_LOCAL_MAILBOX_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x05C)
-+
-+#define ARM_LOCAL_IRQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x060)
-+#define ARM_LOCAL_IRQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x064)
-+#define ARM_LOCAL_IRQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x068)
-+#define ARM_LOCAL_IRQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x06C)
-+
-+#define ARM_LOCAL_FIQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x070)
-+#define ARM_LOCAL_FIQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x074)
-+#define ARM_LOCAL_FIQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x078)
-+#define ARM_LOCAL_FIQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x07C)
-+
-+#define ARM_LOCAL_MAILBOX0_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x080)
-+#define ARM_LOCAL_MAILBOX1_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x084)
-+#define ARM_LOCAL_MAILBOX2_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x088)
-+#define ARM_LOCAL_MAILBOX3_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x08C)
-+
-+#define ARM_LOCAL_MAILBOX0_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x090)
-+#define ARM_LOCAL_MAILBOX1_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x094)
-+#define ARM_LOCAL_MAILBOX2_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x098)
-+#define ARM_LOCAL_MAILBOX3_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x09C)
-+
-+#define ARM_LOCAL_MAILBOX0_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A0)
-+#define ARM_LOCAL_MAILBOX1_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A4)
-+#define ARM_LOCAL_MAILBOX2_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A8)
-+#define ARM_LOCAL_MAILBOX3_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0AC)
-+
-+#define ARM_LOCAL_MAILBOX0_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B0)
-+#define ARM_LOCAL_MAILBOX1_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B4)
-+#define ARM_LOCAL_MAILBOX2_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B8)
-+#define ARM_LOCAL_MAILBOX3_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0BC)
-+
-+#define ARM_LOCAL_MAILBOX0_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C0)
-+#define ARM_LOCAL_MAILBOX1_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C4)
-+#define ARM_LOCAL_MAILBOX2_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C8)
-+#define ARM_LOCAL_MAILBOX3_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0CC)
-+
-+#define ARM_LOCAL_MAILBOX0_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D0)
-+#define ARM_LOCAL_MAILBOX1_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D4)
-+#define ARM_LOCAL_MAILBOX2_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D8)
-+#define ARM_LOCAL_MAILBOX3_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0DC)
-+
-+#define ARM_LOCAL_MAILBOX0_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E0)
-+#define ARM_LOCAL_MAILBOX1_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E4)
-+#define ARM_LOCAL_MAILBOX2_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E8)
-+#define ARM_LOCAL_MAILBOX3_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0EC)
-+
-+#define ARM_LOCAL_MAILBOX0_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F0)
-+#define ARM_LOCAL_MAILBOX1_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F4)
-+#define ARM_LOCAL_MAILBOX2_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F8)
-+#define ARM_LOCAL_MAILBOX3_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0FC)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/barriers.h
-@@ -0,0 +1,3 @@
-+#define mb() dsb()
-+#define rmb() dsb()
-+#define wmb() mb()
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/clkdev.h
-@@ -0,0 +1,7 @@
-+#ifndef __ASM_MACH_CLKDEV_H
-+#define __ASM_MACH_CLKDEV_H
-+
-+#define __clk_get(clk) ({ 1; })
-+#define __clk_put(clk) do { } while (0)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/debug-macro.S
-@@ -0,0 +1,22 @@
-+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
-+ *
-+ * Debugging macro include header
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 1994-1999 Russell King
-+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+*/
-+
-+#include <mach/platform.h>
-+
-+ .macro addruart, rp, rv, tmp
-+ ldr \rp, =UART0_BASE
-+ ldr \rv, =IO_ADDRESS(UART0_BASE)
-+ .endm
-+
-+#include <debug/pl01x.S>
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/entry-macro.S
-@@ -0,0 +1,123 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for BCM2708 platforms
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <mach/hardware.h>
-+#include <mach/irqs.h>
-+
-+ .macro disable_fiq
-+ .endm
-+
-+ .macro get_irqnr_preamble, base, tmp
-+ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE)
-+ .endm
-+
-+ .macro arch_ret_to_user, tmp1, tmp2
-+ .endm
-+
-+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-+ /* get core number */
-+ mrc p15, 0, \tmp, c0, c0, 5
-+ ubfx \tmp, \tmp, #0, #2
-+
-+ /* get core's local interrupt controller */
-+ ldr \irqstat, = __io_address(ARM_LOCAL_IRQ_PENDING0) @ local interrupt source
-+ add \irqstat, \irqstat, \tmp, lsl #2
-+ ldr \tmp, [\irqstat]
-+ /* ignore gpu interrupt */
-+ bic \tmp, #0x100
-+ /* ignore mailbox interrupts */
-+ bics \tmp, #0xf0
-+ beq 1005f
-+
-+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
-+ @ N.B. CLZ is an ARM5 instruction.
-+ mov \irqnr, #(ARM_IRQ_LOCAL_BASE + 31)
-+ sub \irqstat, \tmp, #1
-+ eor \irqstat, \irqstat, \tmp
-+ clz \tmp, \irqstat
-+ sub \irqnr, \tmp
-+ b 1020f
-+1005:
-+ /* get core number */
-+ mrc p15, 0, \tmp, c0, c0, 5
-+ ubfx \tmp, \tmp, #0, #2
-+
-+ cmp \tmp, #1
-+ beq 1020f
-+ cmp \tmp, #2
-+ beq 1020f
-+ cmp \tmp, #3
-+ beq 1020f
-+
-+ /* get masked status */
-+ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)]
-+ mov \irqnr, #(ARM_IRQ0_BASE + 31)
-+ and \tmp, \irqstat, #0x300 @ save bits 8 and 9
-+ /* clear bits 8 and 9, and test */
-+ bics \irqstat, \irqstat, #0x300
-+ bne 1010f
-+
-+ tst \tmp, #0x100
-+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)]
-+ movne \irqnr, #(ARM_IRQ1_BASE + 31)
-+ @ Mask out the interrupts also present in PEND0 - see SW-5809
-+ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10))
-+ bicne \irqstat, #((1<<18) | (1<<19))
-+ bne 1010f
-+
-+ tst \tmp, #0x200
-+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)]
-+ movne \irqnr, #(ARM_IRQ2_BASE + 31)
-+ @ Mask out the interrupts also present in PEND0 - see SW-5809
-+ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25))
-+ bicne \irqstat, #((1<<30))
-+ beq 1020f
-+
-+1010:
-+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
-+ @ N.B. CLZ is an ARM5 instruction.
-+ sub \tmp, \irqstat, #1
-+ eor \irqstat, \irqstat, \tmp
-+ clz \tmp, \irqstat
-+ sub \irqnr, \tmp
-+
-+1020: @ EQ will be set if no irqs pending
-+
-+ .endm
-+
-+ .macro test_for_ipi, irqnr, irqstat, base, tmp
-+ /* get core number */
-+ mrc p15, 0, \tmp, c0, c0, 5
-+ ubfx \tmp, \tmp, #0, #2
-+ /* get core's mailbox interrupt control */
-+ ldr \irqstat, = __io_address(ARM_LOCAL_MAILBOX0_CLR0) @ mbox_clr
-+ add \irqstat, \irqstat, \tmp, lsl #4
-+ ldr \tmp, [\irqstat]
-+ cmp \tmp, #0
-+ beq 1030f
-+ clz \tmp, \tmp
-+ rsb \irqnr, \tmp, #31
-+ mov \tmp, #1
-+ lsl \tmp, \irqnr
-+ str \tmp, [\irqstat] @ clear interrupt source
-+ dsb
-+1030: @ EQ will be set if no irqs pending
-+ .endm
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/frc.h
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/timex.h
-+ *
-+ * BCM2708 free running counter (timer)
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _MACH_FRC_H
-+#define _MACH_FRC_H
-+
-+#define FRC_TICK_RATE (1000000)
-+
-+/*! Free running counter incrementing at the CLOCK_TICK_RATE
-+ (slightly faster than frc_clock_ticks63()
-+ */
-+extern unsigned long frc_clock_ticks32(void);
-+
-+/*! Free running counter incrementing at the CLOCK_TICK_RATE
-+ * Note - top bit should be ignored (see cnt32_to_63)
-+ */
-+extern unsigned long long frc_clock_ticks63(void);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/gpio.h
-@@ -0,0 +1,17 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/gpio.h
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_GPIO_H
-+#define __ASM_ARCH_GPIO_H
-+
-+#define BCM2708_NR_GPIOS 54 // number of gpio lines
-+
-+#define gpio_to_irq(x) ((x) + GPIO_IRQ_START)
-+#define irq_to_gpio(x) ((x) - GPIO_IRQ_START)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/hardware.h
-@@ -0,0 +1,28 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/hardware.h
-+ *
-+ * This file contains the hardware definitions of the BCM2708 devices.
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include <asm/sizes.h>
-+#include <mach/platform.h>
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/io.h
-@@ -0,0 +1,27 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/io.h
-+ *
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARM_ARCH_IO_H
-+#define __ASM_ARM_ARCH_IO_H
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+#define __io(a) __typesafe_io(a)
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/irqs.h
-@@ -0,0 +1,225 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/irqs.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _BCM2708_IRQS_H_
-+#define _BCM2708_IRQS_H_
-+
-+#include <mach/platform.h>
-+
-+/*
-+ * IRQ interrupts definitions are the same as the INT definitions
-+ * held within platform.h
-+ */
-+#define IRQ_ARMCTRL_START 0
-+#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0)
-+#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1)
-+#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2)
-+#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3)
-+#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0)
-+#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1)
-+#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2)
-+#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG)
-+#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP)
-+#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB)
-+#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D)
-+#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER)
-+#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0)
-+#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1)
-+#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2)
-+#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3)
-+#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0)
-+#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1)
-+#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2)
-+#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3)
-+#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4)
-+#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5)
-+#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6)
-+#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7)
-+#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8)
-+#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9)
-+#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10)
-+#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11)
-+#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12)
-+#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX)
-+#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM)
-+#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA)
-+#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT)
-+#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER)
-+#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX)
-+#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC)
-+#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0)
-+#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE)
-+#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0)
-+#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1)
-+#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0)
-+#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1)
-+#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1)
-+#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV)
-+#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1)
-+#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0)
-+#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1)
-+#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR)
-+#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI)
-+#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0)
-+#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1)
-+#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2)
-+#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3)
-+#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C)
-+#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI)
-+#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM)
-+#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO)
-+#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART)
-+#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS)
-+#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC)
-+#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG)
-+#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG)
-+#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO)
-+#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON)
-+
-+#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER)
-+#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX)
-+#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0)
-+#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1)
-+#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED)
-+#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED)
-+#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0)
-+#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1)
-+#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1)
-+#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2)
-+
-+#define IRQ_ARM_LOCAL_CNTPSIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPSIRQ)
-+#define IRQ_ARM_LOCAL_CNTPNSIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPNSIRQ)
-+#define IRQ_ARM_LOCAL_CNTHPIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTHPIRQ)
-+#define IRQ_ARM_LOCAL_CNTVIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTVIRQ)
-+#define IRQ_ARM_LOCAL_MAILBOX0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX0)
-+#define IRQ_ARM_LOCAL_MAILBOX1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX1)
-+#define IRQ_ARM_LOCAL_MAILBOX2 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX2)
-+#define IRQ_ARM_LOCAL_MAILBOX3 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX3)
-+#define IRQ_ARM_LOCAL_GPU_FAST (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_GPU_FAST)
-+#define IRQ_ARM_LOCAL_PMU_FAST (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_PMU_FAST)
-+#define IRQ_ARM_LOCAL_ZERO (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_ZERO)
-+#define IRQ_ARM_LOCAL_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_TIMER)
-+
-+#define FIQ_START HARD_IRQS
-+
-+/*
-+ * FIQ interrupts definitions are the same as the INT definitions.
-+ */
-+#define FIQ_TIMER0 (FIQ_START+INTERRUPT_TIMER0)
-+#define FIQ_TIMER1 (FIQ_START+INTERRUPT_TIMER1)
-+#define FIQ_TIMER2 (FIQ_START+INTERRUPT_TIMER2)
-+#define FIQ_TIMER3 (FIQ_START+INTERRUPT_TIMER3)
-+#define FIQ_CODEC0 (FIQ_START+INTERRUPT_CODEC0)
-+#define FIQ_CODEC1 (FIQ_START+INTERRUPT_CODEC1)
-+#define FIQ_CODEC2 (FIQ_START+INTERRUPT_CODEC2)
-+#define FIQ_JPEG (FIQ_START+INTERRUPT_JPEG)
-+#define FIQ_ISP (FIQ_START+INTERRUPT_ISP)
-+#define FIQ_USB (FIQ_START+INTERRUPT_USB)
-+#define FIQ_3D (FIQ_START+INTERRUPT_3D)
-+#define FIQ_TRANSPOSER (FIQ_START+INTERRUPT_TRANSPOSER)
-+#define FIQ_MULTICORESYNC0 (FIQ_START+INTERRUPT_MULTICORESYNC0)
-+#define FIQ_MULTICORESYNC1 (FIQ_START+INTERRUPT_MULTICORESYNC1)
-+#define FIQ_MULTICORESYNC2 (FIQ_START+INTERRUPT_MULTICORESYNC2)
-+#define FIQ_MULTICORESYNC3 (FIQ_START+INTERRUPT_MULTICORESYNC3)
-+#define FIQ_DMA0 (FIQ_START+INTERRUPT_DMA0)
-+#define FIQ_DMA1 (FIQ_START+INTERRUPT_DMA1)
-+#define FIQ_DMA2 (FIQ_START+INTERRUPT_DMA2)
-+#define FIQ_DMA3 (FIQ_START+INTERRUPT_DMA3)
-+#define FIQ_DMA4 (FIQ_START+INTERRUPT_DMA4)
-+#define FIQ_DMA5 (FIQ_START+INTERRUPT_DMA5)
-+#define FIQ_DMA6 (FIQ_START+INTERRUPT_DMA6)
-+#define FIQ_DMA7 (FIQ_START+INTERRUPT_DMA7)
-+#define FIQ_DMA8 (FIQ_START+INTERRUPT_DMA8)
-+#define FIQ_DMA9 (FIQ_START+INTERRUPT_DMA9)
-+#define FIQ_DMA10 (FIQ_START+INTERRUPT_DMA10)
-+#define FIQ_DMA11 (FIQ_START+INTERRUPT_DMA11)
-+#define FIQ_DMA12 (FIQ_START+INTERRUPT_DMA12)
-+#define FIQ_AUX (FIQ_START+INTERRUPT_AUX)
-+#define FIQ_ARM (FIQ_START+INTERRUPT_ARM)
-+#define FIQ_VPUDMA (FIQ_START+INTERRUPT_VPUDMA)
-+#define FIQ_HOSTPORT (FIQ_START+INTERRUPT_HOSTPORT)
-+#define FIQ_VIDEOSCALER (FIQ_START+INTERRUPT_VIDEOSCALER)
-+#define FIQ_CCP2TX (FIQ_START+INTERRUPT_CCP2TX)
-+#define FIQ_SDC (FIQ_START+INTERRUPT_SDC)
-+#define FIQ_DSI0 (FIQ_START+INTERRUPT_DSI0)
-+#define FIQ_AVE (FIQ_START+INTERRUPT_AVE)
-+#define FIQ_CAM0 (FIQ_START+INTERRUPT_CAM0)
-+#define FIQ_CAM1 (FIQ_START+INTERRUPT_CAM1)
-+#define FIQ_HDMI0 (FIQ_START+INTERRUPT_HDMI0)
-+#define FIQ_HDMI1 (FIQ_START+INTERRUPT_HDMI1)
-+#define FIQ_PIXELVALVE1 (FIQ_START+INTERRUPT_PIXELVALVE1)
-+#define FIQ_I2CSPISLV (FIQ_START+INTERRUPT_I2CSPISLV)
-+#define FIQ_DSI1 (FIQ_START+INTERRUPT_DSI1)
-+#define FIQ_PWA0 (FIQ_START+INTERRUPT_PWA0)
-+#define FIQ_PWA1 (FIQ_START+INTERRUPT_PWA1)
-+#define FIQ_CPR (FIQ_START+INTERRUPT_CPR)
-+#define FIQ_SMI (FIQ_START+INTERRUPT_SMI)
-+#define FIQ_GPIO0 (FIQ_START+INTERRUPT_GPIO0)
-+#define FIQ_GPIO1 (FIQ_START+INTERRUPT_GPIO1)
-+#define FIQ_GPIO2 (FIQ_START+INTERRUPT_GPIO2)
-+#define FIQ_GPIO3 (FIQ_START+INTERRUPT_GPIO3)
-+#define FIQ_I2C (FIQ_START+INTERRUPT_I2C)
-+#define FIQ_SPI (FIQ_START+INTERRUPT_SPI)
-+#define FIQ_I2SPCM (FIQ_START+INTERRUPT_I2SPCM)
-+#define FIQ_SDIO (FIQ_START+INTERRUPT_SDIO)
-+#define FIQ_UART (FIQ_START+INTERRUPT_UART)
-+#define FIQ_SLIMBUS (FIQ_START+INTERRUPT_SLIMBUS)
-+#define FIQ_VEC (FIQ_START+INTERRUPT_VEC)
-+#define FIQ_CPG (FIQ_START+INTERRUPT_CPG)
-+#define FIQ_RNG (FIQ_START+INTERRUPT_RNG)
-+#define FIQ_ARASANSDIO (FIQ_START+INTERRUPT_ARASANSDIO)
-+#define FIQ_AVSPMON (FIQ_START+INTERRUPT_AVSPMON)
-+
-+#define FIQ_ARM_TIMER (FIQ_START+INTERRUPT_ARM_TIMER)
-+#define FIQ_ARM_MAILBOX (FIQ_START+INTERRUPT_ARM_MAILBOX)
-+#define FIQ_ARM_DOORBELL_0 (FIQ_START+INTERRUPT_ARM_DOORBELL_0)
-+#define FIQ_ARM_DOORBELL_1 (FIQ_START+INTERRUPT_ARM_DOORBELL_1)
-+#define FIQ_VPU0_HALTED (FIQ_START+INTERRUPT_VPU0_HALTED)
-+#define FIQ_VPU1_HALTED (FIQ_START+INTERRUPT_VPU1_HALTED)
-+#define FIQ_ILLEGAL_TYPE0 (FIQ_START+INTERRUPT_ILLEGAL_TYPE0)
-+#define FIQ_ILLEGAL_TYPE1 (FIQ_START+INTERRUPT_ILLEGAL_TYPE1)
-+#define FIQ_PENDING1 (FIQ_START+INTERRUPT_PENDING1)
-+#define FIQ_PENDING2 (FIQ_START+INTERRUPT_PENDING2)
-+
-+#define FIQ_ARM_LOCAL_CNTPSIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPSIRQ)
-+#define FIQ_ARM_LOCAL_CNTPNSIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPNSIRQ)
-+#define FIQ_ARM_LOCAL_CNTHPIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTHPIRQ)
-+#define FIQ_ARM_LOCAL_CNTVIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTVIRQ)
-+#define FIQ_ARM_LOCAL_MAILBOX0 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX0)
-+#define FIQ_ARM_LOCAL_MAILBOX1 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX1)
-+#define FIQ_ARM_LOCAL_MAILBOX2 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX2)
-+#define FIQ_ARM_LOCAL_MAILBOX3 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX3)
-+#define FIQ_ARM_LOCAL_GPU_FAST (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_GPU_FAST)
-+#define FIQ_ARM_LOCAL_PMU_FAST (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_PMU_FAST)
-+#define FIQ_ARM_LOCAL_ZERO (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_ZERO)
-+#define FIQ_ARM_LOCAL_TIMER (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_TIMER)
-+
-+#define HARD_IRQS (128)
-+#define FIQ_IRQS (128)
-+#define GPIO_IRQ_START (HARD_IRQS + FIQ_IRQS)
-+#define GPIO_IRQS (32*5)
-+#define SPARE_ALLOC_IRQS 64
-+#define BCM2708_ALLOC_IRQS (HARD_IRQS+FIQ_IRQS+GPIO_IRQS+SPARE_ALLOC_IRQS)
-+#define FREE_IRQS 128
-+#define NR_IRQS (BCM2708_ALLOC_IRQS+FREE_IRQS)
-+
-+#endif /* _BCM2708_IRQS_H_ */
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/memory.h
-@@ -0,0 +1,57 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/memory.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_MEMORY_H
-+#define __ASM_ARCH_MEMORY_H
-+
-+/* Memory overview:
-+
-+ [ARMcore] <--virtual addr-->
-+ [ARMmmu] <--physical addr-->
-+ [GERTmap] <--bus add-->
-+ [VCperiph]
-+
-+*/
-+
-+/*
-+ * Physical DRAM offset.
-+ */
-+#define BCM_PLAT_PHYS_OFFSET UL(0x00000000)
-+#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */
-+
-+#ifdef CONFIG_BCM2708_NOL2CACHE
-+ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */
-+#else
-+ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */
-+#endif
-+
-+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment
-+ * will provide the offset into this area as well as setting the bits that
-+ * stop the L1 and L2 cache from being used
-+ *
-+ * WARNING: this only works because the ARM is given memory at a fixed location
-+ * (ARMMEM_OFFSET)
-+ */
-+#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET)
-+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
-+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
-+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET))
-+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET))
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/platform.h
-@@ -0,0 +1,225 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/platform.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef _BCM2708_PLATFORM_H
-+#define _BCM2708_PLATFORM_H
-+
-+
-+/* macros to get at IO space when running virtually */
-+#define IO_ADDRESS(x) (((x) & 0x00ffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-+
-+#define __io_address(n) IOMEM(IO_ADDRESS(n))
-+
-+
-+/*
-+ * SDRAM
-+ */
-+#define BCM2708_SDRAM_BASE 0x00000000
-+
-+/*
-+ * Logic expansion modules
-+ *
-+ */
-+
-+
-+/* ------------------------------------------------------------------------
-+ * BCM2708 ARMCTRL Registers
-+ * ------------------------------------------------------------------------
-+ */
-+
-+#define HW_REGISTER_RW(addr) (addr)
-+#define HW_REGISTER_RO(addr) (addr)
-+
-+#include "arm_control.h"
-+#undef ARM_BASE
-+
-+/*
-+ * Definitions and addresses for the ARM CONTROL logic
-+ * This file is manually generated.
-+ */
-+
-+#define BCM2708_PERI_BASE 0x3F000000
-+#define IC0_BASE (BCM2708_PERI_BASE + 0x2000)
-+#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */
-+#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */
-+#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */
-+#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
-+#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
-+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */
-+#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
-+#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */
-+#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */
-+#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
-+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */
-+#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
-+#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
-+#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
-+#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */
-+#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */
-+#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
-+#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
-+#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
-+
-+#define ARMCTRL_BASE (ARM_BASE + 0x000)
-+#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */
-+#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */
-+#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */
-+
-+
-+/*
-+ * Interrupt assignments
-+ */
-+
-+#define ARM_IRQ1_BASE 0
-+#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0)
-+#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1)
-+#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2)
-+#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3)
-+#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4)
-+#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5)
-+#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6)
-+#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7)
-+#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8)
-+#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9)
-+#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10)
-+#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11)
-+#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12)
-+#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13)
-+#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14)
-+#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15)
-+#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16)
-+#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17)
-+#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18)
-+#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19)
-+#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20)
-+#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21)
-+#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22)
-+#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23)
-+#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24)
-+#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25)
-+#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26)
-+#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27)
-+#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28)
-+#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29)
-+#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30)
-+#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31)
-+
-+#define ARM_IRQ2_BASE 32
-+#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0)
-+#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1)
-+#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2)
-+#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3)
-+#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4)
-+#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5)
-+#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6)
-+#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7)
-+#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8)
-+#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9)
-+#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10)
-+#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11)
-+#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12)
-+#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13)
-+#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14)
-+#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15)
-+#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16)
-+#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17)
-+#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18)
-+#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19)
-+#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20)
-+#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21)
-+#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22)
-+#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23)
-+#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24)
-+#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25)
-+#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26)
-+#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27)
-+#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28)
-+#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29)
-+#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30)
-+#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31)
-+
-+#define ARM_IRQ0_BASE 64
-+#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0)
-+#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1)
-+#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2)
-+#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3)
-+#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4)
-+#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5)
-+#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6)
-+#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7)
-+#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8)
-+#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9)
-+#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10)
-+#define INTERRUPT_USB (ARM_IRQ0_BASE + 11)
-+#define INTERRUPT_3D (ARM_IRQ0_BASE + 12)
-+#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13)
-+#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14)
-+#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15)
-+#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16)
-+#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17)
-+#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18)
-+#define INTERRUPT_UART (ARM_IRQ0_BASE + 19)
-+#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20)
-+
-+#define ARM_IRQ_LOCAL_BASE 96
-+#define INTERRUPT_ARM_LOCAL_CNTPSIRQ (ARM_IRQ_LOCAL_BASE + 0)
-+#define INTERRUPT_ARM_LOCAL_CNTPNSIRQ (ARM_IRQ_LOCAL_BASE + 1)
-+#define INTERRUPT_ARM_LOCAL_CNTHPIRQ (ARM_IRQ_LOCAL_BASE + 2)
-+#define INTERRUPT_ARM_LOCAL_CNTVIRQ (ARM_IRQ_LOCAL_BASE + 3)
-+#define INTERRUPT_ARM_LOCAL_MAILBOX0 (ARM_IRQ_LOCAL_BASE + 4)
-+#define INTERRUPT_ARM_LOCAL_MAILBOX1 (ARM_IRQ_LOCAL_BASE + 5)
-+#define INTERRUPT_ARM_LOCAL_MAILBOX2 (ARM_IRQ_LOCAL_BASE + 6)
-+#define INTERRUPT_ARM_LOCAL_MAILBOX3 (ARM_IRQ_LOCAL_BASE + 7)
-+#define INTERRUPT_ARM_LOCAL_GPU_FAST (ARM_IRQ_LOCAL_BASE + 8)
-+#define INTERRUPT_ARM_LOCAL_PMU_FAST (ARM_IRQ_LOCAL_BASE + 9)
-+#define INTERRUPT_ARM_LOCAL_ZERO (ARM_IRQ_LOCAL_BASE + 10)
-+#define INTERRUPT_ARM_LOCAL_TIMER (ARM_IRQ_LOCAL_BASE + 11)
-+
-+/*
-+ * Watchdog
-+ */
-+#define PM_RSTC (PM_BASE+0x1c)
-+#define PM_RSTS (PM_BASE+0x20)
-+#define PM_WDOG (PM_BASE+0x24)
-+
-+#define PM_WDOG_RESET 0000000000
-+#define PM_PASSWORD 0x5a000000
-+#define PM_WDOG_TIME_SET 0x000fffff
-+#define PM_RSTC_WRCFG_CLR 0xffffffcf
-+#define PM_RSTC_WRCFG_SET 0x00000030
-+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-+#define PM_RSTC_RESET 0x00000102
-+
-+#define PM_RSTS_HADPOR_SET 0x00001000
-+#define PM_RSTS_HADSRH_SET 0x00000400
-+#define PM_RSTS_HADSRF_SET 0x00000200
-+#define PM_RSTS_HADSRQ_SET 0x00000100
-+#define PM_RSTS_HADWRH_SET 0x00000040
-+#define PM_RSTS_HADWRF_SET 0x00000020
-+#define PM_RSTS_HADWRQ_SET 0x00000010
-+#define PM_RSTS_HADDRH_SET 0x00000004
-+#define PM_RSTS_HADDRF_SET 0x00000002
-+#define PM_RSTS_HADDRQ_SET 0x00000001
-+
-+#define UART0_CLOCK 3000000
-+
-+#endif
-+
-+/* END */
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/system.h
-@@ -0,0 +1,38 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/system.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <linux/io.h>
-+#include <mach/hardware.h>
-+#include <mach/platform.h>
-+
-+static inline void arch_idle(void)
-+{
-+ /*
-+ * This should do all the clock switching
-+ * and wait for interrupt tricks
-+ */
-+ cpu_do_idle();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/timex.h
-@@ -0,0 +1,23 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/timex.h
-+ *
-+ * BCM2708 sysem clock frequency
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#define CLOCK_TICK_RATE (1000000)
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/uncompress.h
-@@ -0,0 +1,84 @@
-+/*
-+ * arch/arm/mach-bcn2708/include/mach/uncompress.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ * Copyright (C) 2003 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/amba/serial.h>
-+#include <mach/hardware.h>
-+
-+#define UART_BAUD 115200
-+
-+#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR)
-+#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR)
-+#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD)
-+#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD)
-+#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH)
-+#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR)
-+
-+/*
-+ * This does not append a newline
-+ */
-+static inline void putc(int c)
-+{
-+ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF)
-+ barrier();
-+
-+ __raw_writel(c, BCM2708_UART_DR);
-+}
-+
-+static inline void flush(void)
-+{
-+ int fr;
-+
-+ do {
-+ fr = __raw_readl(BCM2708_UART_FR);
-+ barrier();
-+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
-+}
-+
-+static inline void arch_decomp_setup(void)
-+{
-+ int temp, div, rem, frac;
-+
-+ temp = 16 * UART_BAUD;
-+ div = UART0_CLOCK / temp;
-+ rem = UART0_CLOCK % temp;
-+ temp = (8 * rem) / UART_BAUD;
-+ frac = (temp >> 1) + (temp & 1);
-+
-+ /* Make sure the UART is disabled before we start */
-+ __raw_writel(0, BCM2708_UART_CR);
-+
-+ /* Set the baud rate */
-+ __raw_writel(div, BCM2708_UART_IBRD);
-+ __raw_writel(frac, BCM2708_UART_FBRD);
-+
-+ /* Set the UART to 8n1, FIFO enabled */
-+ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH);
-+
-+ /* Enable the UART */
-+ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
-+ BCM2708_UART_CR);
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/vc_mem.h
-@@ -0,0 +1,35 @@
-+/*****************************************************************************
-+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#if !defined( VC_MEM_H )
-+#define VC_MEM_H
-+
-+#include <linux/ioctl.h>
-+
-+#define VC_MEM_IOC_MAGIC 'v'
-+
-+#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long )
-+#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int )
-+#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int )
-+#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int )
-+
-+#if defined( __KERNEL__ )
-+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF
-+
-+extern unsigned long mm_vc_mem_phys_addr;
-+extern unsigned int mm_vc_mem_size;
-+extern int vc_mem_get_current_size( void );
-+#endif
-+
-+#endif /* VC_MEM_H */
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/vc_support.h
-@@ -0,0 +1,69 @@
-+#ifndef _VC_SUPPORT_H_
-+#define _VC_SUPPORT_H_
-+
-+/*
-+ * vc_support.h
-+ *
-+ * Created on: 25 Nov 2012
-+ * Author: Simon
-+ */
-+
-+enum {
-+/*
-+ If a MEM_HANDLE_T is discardable, the memory manager may resize it to size
-+ 0 at any time when it is not locked or retained.
-+ */
-+ MEM_FLAG_DISCARDABLE = 1 << 0,
-+
-+ /*
-+ If a MEM_HANDLE_T is allocating (or normal), its block of memory will be
-+ accessed in an allocating fashion through the cache.
-+ */
-+ MEM_FLAG_NORMAL = 0 << 2,
-+ MEM_FLAG_ALLOCATING = MEM_FLAG_NORMAL,
-+
-+ /*
-+ If a MEM_HANDLE_T is direct, its block of memory will be accessed
-+ directly, bypassing the cache.
-+ */
-+ MEM_FLAG_DIRECT = 1 << 2,
-+
-+ /*
-+ If a MEM_HANDLE_T is coherent, its block of memory will be accessed in a
-+ non-allocating fashion through the cache.
-+ */
-+ MEM_FLAG_COHERENT = 2 << 2,
-+
-+ /*
-+ If a MEM_HANDLE_T is L1-nonallocating, its block of memory will be accessed by
-+ the VPU in a fashion which is allocating in L2, but only coherent in L1.
-+ */
-+ MEM_FLAG_L1_NONALLOCATING = (MEM_FLAG_DIRECT | MEM_FLAG_COHERENT),
-+
-+ /*
-+ If a MEM_HANDLE_T is zero'd, its contents are set to 0 rather than
-+ MEM_HANDLE_INVALID on allocation and resize up.
-+ */
-+ MEM_FLAG_ZERO = 1 << 4,
-+
-+ /*
-+ If a MEM_HANDLE_T is uninitialised, it will not be reset to a defined value
-+ (either zero, or all 1's) on allocation.
-+ */
-+ MEM_FLAG_NO_INIT = 1 << 5,
-+
-+ /*
-+ Hints.
-+ */
-+ MEM_FLAG_HINT_PERMALOCK = 1 << 6, /* Likely to be locked for long periods of time. */
-+};
-+
-+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags);
-+unsigned int ReleaseVcMemory(unsigned int handle);
-+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle);
-+unsigned int UnlockVcMemory(unsigned int handle);
-+
-+unsigned int ExecuteVcCode(unsigned int code,
-+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/include/mach/vmalloc.h
-@@ -0,0 +1,20 @@
-+/*
-+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h
-+ *
-+ * Copyright (C) 2010 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#define VMALLOC_END (0xff000000)
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/vc_mem.c
-@@ -0,0 +1,431 @@
-+/*****************************************************************************
-+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/fs.h>
-+#include <linux/device.h>
-+#include <linux/cdev.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/debugfs.h>
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_data/mailbox-bcm2708.h>
-+
-+#ifdef CONFIG_ARCH_KONA
-+#include <chal/chal_ipc.h>
-+#elif defined(CONFIG_ARCH_BCM2708) || defined(CONFIG_ARCH_BCM2709)
-+#else
-+#include <csp/chal_ipc.h>
-+#endif
-+
-+#include "mach/vc_mem.h"
-+
-+#define DRIVER_NAME "vc-mem"
-+
-+// Device (/dev) related variables
-+static dev_t vc_mem_devnum = 0;
-+static struct class *vc_mem_class = NULL;
-+static struct cdev vc_mem_cdev;
-+static int vc_mem_inited = 0;
-+
-+#ifdef CONFIG_DEBUG_FS
-+static struct dentry *vc_mem_debugfs_entry;
-+#endif
-+
-+/*
-+ * Videocore memory addresses and size
-+ *
-+ * Drivers that wish to know the videocore memory addresses and sizes should
-+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in
-+ * headers. This allows the other drivers to not be tied down to a a certain
-+ * address/size at compile time.
-+ *
-+ * In the future, the goal is to have the videocore memory virtual address and
-+ * size be calculated at boot time rather than at compile time. The decision of
-+ * where the videocore memory resides and its size would be in the hands of the
-+ * bootloader (and/or kernel). When that happens, the values of these variables
-+ * would be calculated and assigned in the init function.
-+ */
-+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space
-+unsigned long mm_vc_mem_phys_addr = 0x00000000;
-+unsigned int mm_vc_mem_size = 0;
-+unsigned int mm_vc_mem_base = 0;
-+
-+EXPORT_SYMBOL(mm_vc_mem_phys_addr);
-+EXPORT_SYMBOL(mm_vc_mem_size);
-+EXPORT_SYMBOL(mm_vc_mem_base);
-+
-+static uint phys_addr = 0;
-+static uint mem_size = 0;
-+static uint mem_base = 0;
-+
-+
-+/****************************************************************************
-+*
-+* vc_mem_open
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_open(struct inode *inode, struct file *file)
-+{
-+ (void) inode;
-+ (void) file;
-+
-+ pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+ return 0;
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_release
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_release(struct inode *inode, struct file *file)
-+{
-+ (void) inode;
-+ (void) file;
-+
-+ pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+ return 0;
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_get_size
-+*
-+***************************************************************************/
-+
-+static void
-+vc_mem_get_size(void)
-+{
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_get_base
-+*
-+***************************************************************************/
-+
-+static void
-+vc_mem_get_base(void)
-+{
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_get_current_size
-+*
-+***************************************************************************/
-+
-+int
-+vc_mem_get_current_size(void)
-+{
-+ return mm_vc_mem_size;
-+}
-+
-+EXPORT_SYMBOL_GPL(vc_mem_get_current_size);
-+
-+/****************************************************************************
-+*
-+* vc_mem_ioctl
-+*
-+***************************************************************************/
-+
-+static long
-+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int rc = 0;
-+
-+ (void) cmd;
-+ (void) arg;
-+
-+ pr_debug("%s: called file = 0x%p\n", __func__, file);
-+
-+ switch (cmd) {
-+ case VC_MEM_IOC_MEM_PHYS_ADDR:
-+ {
-+ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n",
-+ __func__, (void *) mm_vc_mem_phys_addr);
-+
-+ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr,
-+ sizeof (mm_vc_mem_phys_addr)) != 0) {
-+ rc = -EFAULT;
-+ }
-+ break;
-+ }
-+ case VC_MEM_IOC_MEM_SIZE:
-+ {
-+ // Get the videocore memory size first
-+ vc_mem_get_size();
-+
-+ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__,
-+ mm_vc_mem_size);
-+
-+ if (copy_to_user((void *) arg, &mm_vc_mem_size,
-+ sizeof (mm_vc_mem_size)) != 0) {
-+ rc = -EFAULT;
-+ }
-+ break;
-+ }
-+ case VC_MEM_IOC_MEM_BASE:
-+ {
-+ // Get the videocore memory base
-+ vc_mem_get_base();
-+
-+ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__,
-+ mm_vc_mem_base);
-+
-+ if (copy_to_user((void *) arg, &mm_vc_mem_base,
-+ sizeof (mm_vc_mem_base)) != 0) {
-+ rc = -EFAULT;
-+ }
-+ break;
-+ }
-+ case VC_MEM_IOC_MEM_LOAD:
-+ {
-+ // Get the videocore memory base
-+ vc_mem_get_base();
-+
-+ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__,
-+ mm_vc_mem_base);
-+
-+ if (copy_to_user((void *) arg, &mm_vc_mem_base,
-+ sizeof (mm_vc_mem_base)) != 0) {
-+ rc = -EFAULT;
-+ }
-+ break;
-+ }
-+ default:
-+ {
-+ return -ENOTTY;
-+ }
-+ }
-+ pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc);
-+
-+ return rc;
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_mmap
-+*
-+***************************************************************************/
-+
-+static int
-+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma)
-+{
-+ int rc = 0;
-+ unsigned long length = vma->vm_end - vma->vm_start;
-+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-+
-+ pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n",
-+ __func__, (long) vma->vm_start, (long) vma->vm_end,
-+ (long) vma->vm_pgoff);
-+
-+ if (offset + length > mm_vc_mem_size) {
-+ pr_err("%s: length %ld is too big\n", __func__, length);
-+ return -EINVAL;
-+ }
-+ // Do not cache the memory map
-+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-+
-+ rc = remap_pfn_range(vma, vma->vm_start,
-+ (mm_vc_mem_phys_addr >> PAGE_SHIFT) +
-+ vma->vm_pgoff, length, vma->vm_page_prot);
-+ if (rc != 0) {
-+ pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc);
-+ }
-+
-+ return rc;
-+}
-+
-+/****************************************************************************
-+*
-+* File Operations for the driver.
-+*
-+***************************************************************************/
-+
-+static const struct file_operations vc_mem_fops = {
-+ .owner = THIS_MODULE,
-+ .open = vc_mem_open,
-+ .release = vc_mem_release,
-+ .unlocked_ioctl = vc_mem_ioctl,
-+ .mmap = vc_mem_mmap,
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+static void vc_mem_debugfs_deinit(void)
-+{
-+ debugfs_remove_recursive(vc_mem_debugfs_entry);
-+ vc_mem_debugfs_entry = NULL;
-+}
-+
-+
-+static int vc_mem_debugfs_init(
-+ struct device *dev)
-+{
-+ vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL);
-+ if (!vc_mem_debugfs_entry) {
-+ dev_warn(dev, "could not create debugfs entry\n");
-+ return -EFAULT;
-+ }
-+
-+ if (!debugfs_create_x32("vc_mem_phys_addr",
-+ 0444,
-+ vc_mem_debugfs_entry,
-+ (u32 *)&mm_vc_mem_phys_addr)) {
-+ dev_warn(dev, "%s:could not create vc_mem_phys entry\n",
-+ __func__);
-+ goto fail;
-+ }
-+
-+ if (!debugfs_create_x32("vc_mem_size",
-+ 0444,
-+ vc_mem_debugfs_entry,
-+ (u32 *)&mm_vc_mem_size)) {
-+ dev_warn(dev, "%s:could not create vc_mem_size entry\n",
-+ __func__);
-+ goto fail;
-+ }
-+
-+ if (!debugfs_create_x32("vc_mem_base",
-+ 0444,
-+ vc_mem_debugfs_entry,
-+ (u32 *)&mm_vc_mem_base)) {
-+ dev_warn(dev, "%s:could not create vc_mem_base entry\n",
-+ __func__);
-+ goto fail;
-+ }
-+
-+ return 0;
-+
-+fail:
-+ vc_mem_debugfs_deinit();
-+ return -EFAULT;
-+}
-+
-+#endif /* CONFIG_DEBUG_FS */
-+
-+
-+/****************************************************************************
-+*
-+* vc_mem_init
-+*
-+***************************************************************************/
-+
-+static int __init
-+vc_mem_init(void)
-+{
-+ int rc = -EFAULT;
-+ struct device *dev;
-+
-+ pr_debug("%s: called\n", __func__);
-+
-+ mm_vc_mem_phys_addr = phys_addr;
-+ mm_vc_mem_size = mem_size;
-+ mm_vc_mem_base = mem_base;
-+
-+ vc_mem_get_size();
-+
-+ pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n",
-+ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024));
-+
-+ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) {
-+ pr_err("%s: alloc_chrdev_region failed (rc=%d)\n",
-+ __func__, rc);
-+ goto out_err;
-+ }
-+
-+ cdev_init(&vc_mem_cdev, &vc_mem_fops);
-+ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) {
-+ pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc);
-+ goto out_unregister;
-+ }
-+
-+ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME);
-+ if (IS_ERR(vc_mem_class)) {
-+ rc = PTR_ERR(vc_mem_class);
-+ pr_err("%s: class_create failed (rc=%d)\n", __func__, rc);
-+ goto out_cdev_del;
-+ }
-+
-+ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL,
-+ DRIVER_NAME);
-+ if (IS_ERR(dev)) {
-+ rc = PTR_ERR(dev);
-+ pr_err("%s: device_create failed (rc=%d)\n", __func__, rc);
-+ goto out_class_destroy;
-+ }
-+
-+#ifdef CONFIG_DEBUG_FS
-+ /* don't fail if the debug entries cannot be created */
-+ vc_mem_debugfs_init(dev);
-+#endif
-+
-+ vc_mem_inited = 1;
-+ return 0;
-+
-+ device_destroy(vc_mem_class, vc_mem_devnum);
-+
-+ out_class_destroy:
-+ class_destroy(vc_mem_class);
-+ vc_mem_class = NULL;
-+
-+ out_cdev_del:
-+ cdev_del(&vc_mem_cdev);
-+
-+ out_unregister:
-+ unregister_chrdev_region(vc_mem_devnum, 1);
-+
-+ out_err:
-+ return -1;
-+}
-+
-+/****************************************************************************
-+*
-+* vc_mem_exit
-+*
-+***************************************************************************/
-+
-+static void __exit
-+vc_mem_exit(void)
-+{
-+ pr_debug("%s: called\n", __func__);
-+
-+ if (vc_mem_inited) {
-+#if CONFIG_DEBUG_FS
-+ vc_mem_debugfs_deinit();
-+#endif
-+ device_destroy(vc_mem_class, vc_mem_devnum);
-+ class_destroy(vc_mem_class);
-+ cdev_del(&vc_mem_cdev);
-+ unregister_chrdev_region(vc_mem_devnum, 1);
-+ }
-+}
-+
-+module_init(vc_mem_init);
-+module_exit(vc_mem_exit);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Broadcom Corporation");
-+
-+module_param(phys_addr, uint, 0644);
-+module_param(mem_size, uint, 0644);
-+module_param(mem_base, uint, 0644);
---- /dev/null
-+++ b/arch/arm/mach-bcm2709/vc_support.c
-@@ -0,0 +1,318 @@
-+/*
-+ * vc_support.c
-+ *
-+ * Created on: 25 Nov 2012
-+ * Author: Simon
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_data/mailbox-bcm2708.h>
-+
-+#ifdef ECLIPSE_IGNORE
-+
-+#define __user
-+#define __init
-+#define __exit
-+#define __iomem
-+#define KERN_DEBUG
-+#define KERN_ERR
-+#define KERN_WARNING
-+#define KERN_INFO
-+#define _IOWR(a, b, c) b
-+#define _IOW(a, b, c) b
-+#define _IO(a, b) b
-+
-+#endif
-+
-+/****** VC MAILBOX FUNCTIONALITY ******/
-+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags)
-+{
-+ struct vc_msg
-+ {
-+ unsigned int m_msgSize;
-+ unsigned int m_response;
-+
-+ struct vc_tag
-+ {
-+ unsigned int m_tagId;
-+ unsigned int m_sendBufferSize;
-+ union {
-+ unsigned int m_sendDataSize;
-+ unsigned int m_recvDataSize;
-+ };
-+
-+ struct args
-+ {
-+ union {
-+ unsigned int m_size;
-+ unsigned int m_handle;
-+ };
-+ unsigned int m_alignment;
-+ unsigned int m_flags;
-+ } m_args;
-+ } m_tag;
-+
-+ unsigned int m_endTag;
-+ } msg;
-+ int s;
-+
-+ msg.m_msgSize = sizeof(msg);
-+ msg.m_response = 0;
-+ msg.m_endTag = 0;
-+
-+ //fill in the tag for the allocation command
-+ msg.m_tag.m_tagId = 0x3000c;
-+ msg.m_tag.m_sendBufferSize = 12;
-+ msg.m_tag.m_sendDataSize = 12;
-+
-+ //fill in our args
-+ msg.m_tag.m_args.m_size = size;
-+ msg.m_tag.m_args.m_alignment = alignment;
-+ msg.m_tag.m_args.m_flags = flags;
-+
-+ //run the command
-+ s = bcm_mailbox_property(&msg, sizeof(msg));
-+
-+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
-+ {
-+ *pHandle = msg.m_tag.m_args.m_handle;
-+ return 0;
-+ }
-+ else
-+ {
-+ printk(KERN_ERR "failed to allocate vc memory: s=%d response=%08x recv data size=%08x\n",
-+ s, msg.m_response, msg.m_tag.m_recvDataSize);
-+ return 1;
-+ }
-+}
-+
-+unsigned int ReleaseVcMemory(unsigned int handle)
-+{
-+ struct vc_msg
-+ {
-+ unsigned int m_msgSize;
-+ unsigned int m_response;
-+
-+ struct vc_tag
-+ {
-+ unsigned int m_tagId;
-+ unsigned int m_sendBufferSize;
-+ union {
-+ unsigned int m_sendDataSize;
-+ unsigned int m_recvDataSize;
-+ };
-+
-+ struct args
-+ {
-+ union {
-+ unsigned int m_handle;
-+ unsigned int m_error;
-+ };
-+ } m_args;
-+ } m_tag;
-+
-+ unsigned int m_endTag;
-+ } msg;
-+ int s;
-+
-+ msg.m_msgSize = sizeof(msg);
-+ msg.m_response = 0;
-+ msg.m_endTag = 0;
-+
-+ //fill in the tag for the release command
-+ msg.m_tag.m_tagId = 0x3000f;
-+ msg.m_tag.m_sendBufferSize = 4;
-+ msg.m_tag.m_sendDataSize = 4;
-+
-+ //pass across the handle
-+ msg.m_tag.m_args.m_handle = handle;
-+
-+ s = bcm_mailbox_property(&msg, sizeof(msg));
-+
-+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
-+ return 0;
-+ else
-+ {
-+ printk(KERN_ERR "failed to release vc memory: s=%d response=%08x recv data size=%08x error=%08x\n",
-+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
-+ return 1;
-+ }
-+}
-+
-+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle)
-+{
-+ struct vc_msg
-+ {
-+ unsigned int m_msgSize;
-+ unsigned int m_response;
-+
-+ struct vc_tag
-+ {
-+ unsigned int m_tagId;
-+ unsigned int m_sendBufferSize;
-+ union {
-+ unsigned int m_sendDataSize;
-+ unsigned int m_recvDataSize;
-+ };
-+
-+ struct args
-+ {
-+ union {
-+ unsigned int m_handle;
-+ unsigned int m_busAddress;
-+ };
-+ } m_args;
-+ } m_tag;
-+
-+ unsigned int m_endTag;
-+ } msg;
-+ int s;
-+
-+ msg.m_msgSize = sizeof(msg);
-+ msg.m_response = 0;
-+ msg.m_endTag = 0;
-+
-+ //fill in the tag for the lock command
-+ msg.m_tag.m_tagId = 0x3000d;
-+ msg.m_tag.m_sendBufferSize = 4;
-+ msg.m_tag.m_sendDataSize = 4;
-+
-+ //pass across the handle
-+ msg.m_tag.m_args.m_handle = handle;
-+
-+ s = bcm_mailbox_property(&msg, sizeof(msg));
-+
-+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
-+ {
-+ //pick out the bus address
-+ *pBusAddress = msg.m_tag.m_args.m_busAddress;
-+ return 0;
-+ }
-+ else
-+ {
-+ printk(KERN_ERR "failed to lock vc memory: s=%d response=%08x recv data size=%08x\n",
-+ s, msg.m_response, msg.m_tag.m_recvDataSize);
-+ return 1;
-+ }
-+}
-+
-+unsigned int UnlockVcMemory(unsigned int handle)
-+{
-+ struct vc_msg
-+ {
-+ unsigned int m_msgSize;
-+ unsigned int m_response;
-+
-+ struct vc_tag
-+ {
-+ unsigned int m_tagId;
-+ unsigned int m_sendBufferSize;
-+ union {
-+ unsigned int m_sendDataSize;
-+ unsigned int m_recvDataSize;
-+ };
-+
-+ struct args
-+ {
-+ union {
-+ unsigned int m_handle;
-+ unsigned int m_error;
-+ };
-+ } m_args;
-+ } m_tag;
-+
-+ unsigned int m_endTag;
-+ } msg;
-+ int s;
-+
-+ msg.m_msgSize = sizeof(msg);
-+ msg.m_response = 0;
-+ msg.m_endTag = 0;
-+
-+ //fill in the tag for the unlock command
-+ msg.m_tag.m_tagId = 0x3000e;
-+ msg.m_tag.m_sendBufferSize = 4;
-+ msg.m_tag.m_sendDataSize = 4;
-+
-+ //pass across the handle
-+ msg.m_tag.m_args.m_handle = handle;
-+
-+ s = bcm_mailbox_property(&msg, sizeof(msg));
-+
-+ //check the error code too
-+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0)
-+ return 0;
-+ else
-+ {
-+ printk(KERN_ERR "failed to unlock vc memory: s=%d response=%08x recv data size=%08x error%08x\n",
-+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error);
-+ return 1;
-+ }
-+}
-+
-+unsigned int ExecuteVcCode(unsigned int code,
-+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5)
-+{
-+ struct vc_msg
-+ {
-+ unsigned int m_msgSize;
-+ unsigned int m_response;
-+
-+ struct vc_tag
-+ {
-+ unsigned int m_tagId;
-+ unsigned int m_sendBufferSize;
-+ union {
-+ unsigned int m_sendDataSize;
-+ unsigned int m_recvDataSize;
-+ };
-+
-+ struct args
-+ {
-+ union {
-+ unsigned int m_pCode;
-+ unsigned int m_return;
-+ };
-+ unsigned int m_r0;
-+ unsigned int m_r1;
-+ unsigned int m_r2;
-+ unsigned int m_r3;
-+ unsigned int m_r4;
-+ unsigned int m_r5;
-+ } m_args;
-+ } m_tag;
-+
-+ unsigned int m_endTag;
-+ } msg;
-+ int s;
-+
-+ msg.m_msgSize = sizeof(msg);
-+ msg.m_response = 0;
-+ msg.m_endTag = 0;
-+
-+ //fill in the tag for the unlock command
-+ msg.m_tag.m_tagId = 0x30010;
-+ msg.m_tag.m_sendBufferSize = 28;
-+ msg.m_tag.m_sendDataSize = 28;
-+
-+ //pass across the handle
-+ msg.m_tag.m_args.m_pCode = code;
-+ msg.m_tag.m_args.m_r0 = r0;
-+ msg.m_tag.m_args.m_r1 = r1;
-+ msg.m_tag.m_args.m_r2 = r2;
-+ msg.m_tag.m_args.m_r3 = r3;
-+ msg.m_tag.m_args.m_r4 = r4;
-+ msg.m_tag.m_args.m_r5 = r5;
-+
-+ s = bcm_mailbox_property(&msg, sizeof(msg));
-+
-+ //check the error code too
-+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004)
-+ return msg.m_tag.m_args.m_return;
-+ else
-+ {
-+ printk(KERN_ERR "failed to execute: s=%d response=%08x recv data size=%08x\n",
-+ s, msg.m_response, msg.m_tag.m_recvDataSize);
-+ return 1;
-+ }
-+}
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -358,7 +358,7 @@ config CPU_PJ4B
-
- # ARMv6
- config CPU_V6
-- bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
-+ bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708)
- select CPU_32v6
- select CPU_ABRT_EV6
- select CPU_CACHE_V6
---- a/arch/arm/mm/proc-v6.S
-+++ b/arch/arm/mm/proc-v6.S
-@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset)
- *
- * IRQs are already disabled.
- */
-+
-+/* See jira SW-5991 for details of this workaround */
- ENTRY(cpu_v6_do_idle)
-- mov r1, #0
-- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
-- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt
-+ .align 5
-+ mov r1, #2
-+1: subs r1, #1
-+ nop
-+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode
-+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt
-+ nop
-+ nop
-+ nop
-+ bne 1b
- ret lr
-
- ENTRY(cpu_v6_dcache_clean_area)
---- a/arch/arm/mm/proc-v7.S
-+++ b/arch/arm/mm/proc-v7.S
-@@ -460,6 +460,7 @@ __v7_setup_cont:
- orr r0, r0, r6 @ set them
- THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
- ret lr @ return to head.S:__ret
-+ .space 256
- ENDPROC(__v7_setup)
-
- .align 2
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -522,6 +522,8 @@ torbreck MACH_TORBRECK TORBRECK 3090
- prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
- paz00 MACH_PAZ00 PAZ00 3128
- acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
-+bcm2708 MACH_BCM2708 BCM2708 3138
-+bcm2709 MACH_BCM2709 BCM2709 3139
- ag5evm MACH_AG5EVM AG5EVM 3189
- ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
- wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -882,3 +882,39 @@ void __init acpi_generic_timer_init(void
- acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
- }
- #endif
-+
-+int __init dc4_arch_timer_init(void)
-+{
-+ if (arch_timers_present & ARCH_CP15_TIMER) {
-+ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
-+ return -1;
-+ }
-+
-+ arch_timers_present |= ARCH_CP15_TIMER;
-+
-+ /* Try to determine the frequency from the device tree or CNTFRQ */
-+ arch_timer_rate = 19200000;
-+
-+ arch_timer_ppi[PHYS_SECURE_PPI] = IRQ_ARM_LOCAL_CNTPSIRQ;
-+ arch_timer_ppi[PHYS_NONSECURE_PPI] = IRQ_ARM_LOCAL_CNTPNSIRQ;
-+ arch_timer_ppi[VIRT_PPI] = IRQ_ARM_LOCAL_CNTVIRQ;
-+ arch_timer_ppi[HYP_PPI] = IRQ_ARM_LOCAL_CNTHPIRQ;
-+
-+ /*
-+ * If HYP mode is available, we know that the physical timer
-+ * has been configured to be accessible from PL1. Use it, so
-+ * that a guest can use the virtual timer instead.
-+ *
-+ * If no interrupt provided for virtual timer, we'll have to
-+ * stick to the physical timer. It'd better be accessible...
-+ */
-+ if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) {
-+ arch_timer_use_virtual = false;
-+ }
-+
-+ arch_timer_c3stop = 0;
-+
-+ arch_timer_register();
-+ arch_timer_common_init();
-+ return 0;
-+}
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -85,7 +85,7 @@ struct vendor_data {
-
- static unsigned int get_fifosize_arm(struct amba_device *dev)
- {
-- return amba_rev(dev) < 3 ? 16 : 32;
-+ return 16; //TODO: fix: amba_rev(dev) < 3 ? 16 : 32;
- }
-
- static struct vendor_data vendor_arm = {
---- a/include/linux/mmc/host.h
-+++ b/include/linux/mmc/host.h
-@@ -285,6 +285,7 @@ struct mmc_host {
- MMC_CAP2_HS400_1_2V)
- #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
- #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
-+#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */
-
- mmc_pm_flag_t pm_caps; /* supported pm features */
-
projects / openwrt / openwrt.git / blobdiff