brcm2708: rename target to bcm27xx

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0162-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0162-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch b/target/linux/brcm2708/patches-4.19/950-0162-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch
deleted file mode 100644 (file)
index 6e81c14..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0162-overlays-uart0-return-GPIOs-14-and-15-to-inputs.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 627f981e148bb9f7dc01df97fa20fe6124f417f7 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 7 Nov 2018 17:43:10 +0000
-Subject: [PATCH] overlays: uart0 - return GPIOs 14 and 15 to inputs
-
-In the event that alternate pins are used (only useful on Compute
-Modules), return the standard pins to inputs to avoid double-mapping
-them.
-
-See: https://www.raspberrypi.org/forums/viewtopic.php?p=1388713#p1316977
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/uart0-overlay.dts | 13 +++++++------
- 1 file changed, 7 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/uart0-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts
-@@ -17,16 +17,17 @@
-               target = <&gpio>;
-               __overlay__ {
-                       uart0_pins: uart0_pins {
--                              brcm,pins = <14 15>;
--                              brcm,function = <4>; /* alt0 */
--                              brcm,pull = <0 2>;
-+                              brcm,pins = <14 15 14 15>;
-+                              brcm,function = <0 0 4 4>; /* alt0 */
-+                              brcm,pull = <0 0 0 2>;
-                       };
-               };
-       };
- 
-       __overrides__ {
--              txd0_pin = <&uart0_pins>,"brcm,pins:0";
--              rxd0_pin = <&uart0_pins>,"brcm,pins:4";
--              pin_func = <&uart0_pins>,"brcm,function:0";
-+              txd0_pin = <&uart0_pins>,"brcm,pins:8";
-+              rxd0_pin = <&uart0_pins>,"brcm,pins:12";
-+              pin_func = <&uart0_pins>,"brcm,function:8",
-+                         <&uart0_pins>,"brcm,function:12";
-       };
- };