brcm2708: rename target to bcm27xx

[openwrt/openwrt.git] / target / linux / brcm2708 / patches-4.19 / 950-0199-lirc-rpi-Remove-in-favour-of-gpio-ir.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0199-lirc-rpi-Remove-in-favour-of-gpio-ir.patch b/target/linux/brcm2708/patches-4.19/950-0199-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
deleted file mode 100644 (file)
index 0c6e627..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0199-lirc-rpi-Remove-in-favour-of-gpio-ir.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 28b591dadb504861cdc535d5705aa4c8c3d3420f Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Fri, 30 Nov 2018 18:55:23 +0000
-Subject: [PATCH] lirc-rpi: Remove in favour of gpio-ir
-
----
- arch/arm/boot/dts/overlays/Makefile           |  1 -
- .../boot/dts/overlays/lirc-rpi-overlay.dts    | 57 -------------------
- 2 files changed, 58 deletions(-)
- delete mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -68,7 +68,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       jedec-spi-nor.dtbo \
-       justboom-dac.dtbo \
-       justboom-digi.dtbo \
--      lirc-rpi.dtbo \
-       ltc294x.dtbo \
-       mbed-dac.dtbo \
-       mcp23017.dtbo \
---- a/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts
-+++ /dev/null
-@@ -1,57 +0,0 @@
--// Definitions for lirc-rpi module
--/dts-v1/;
--/plugin/;
--
--/ {
--      compatible = "brcm,bcm2708";
--
--      fragment@0 {
--              target-path = "/";
--              __overlay__ {
--                      lirc_rpi: lirc_rpi {
--                              compatible = "rpi,lirc-rpi";
--                              pinctrl-names = "default";
--                              pinctrl-0 = <&lirc_pins>;
--                              status = "okay";
--
--                              // Override autodetection of IR receiver circuit
--                              // (0 = active high, 1 = active low, -1 = no override )
--                              rpi,sense = <0xffffffff>;
--
--                              // Software carrier
--                              // (0 = off, 1 = on)
--                              rpi,softcarrier = <1>;
--
--                              // Invert output
--                              // (0 = off, 1 = on)
--                              rpi,invert = <0>;
--
--                              // Enable debugging messages
--                              // (0 = off, 1 = on)
--                              rpi,debug = <0>;
--                      };
--              };
--      };
--
--      fragment@1 {
--              target = <&gpio>;
--              __overlay__ {
--                      lirc_pins: lirc_pins {
--                              brcm,pins = <17 18>;
--                              brcm,function = <1 0>; // out in
--                              brcm,pull = <0 1>; // off down
--                      };
--              };
--      };
--
--      __overrides__ {
--              gpio_out_pin =  <&lirc_pins>,"brcm,pins:0";
--              gpio_in_pin =   <&lirc_pins>,"brcm,pins:4";
--              gpio_in_pull =  <&lirc_pins>,"brcm,pull:4";
--
--              sense =         <&lirc_rpi>,"rpi,sense:0";
--              softcarrier =   <&lirc_rpi>,"rpi,softcarrier:0";
--              invert =        <&lirc_rpi>,"rpi,invert:0";
--              debug =         <&lirc_rpi>,"rpi,debug:0";
--      };
--};