--- /dev/null
+From 1d3aeba25b10d1ed2b5ae4cf0b535d821539a531 Mon Sep 17 00:00:00 2001
+From: Annaliese McDermond <nh6z@nh6z.net>
+Date: Sun, 17 Mar 2019 16:48:36 -0700
+Subject: [PATCH] dtoverlays: Add Support for the UDRC/DRAWS
+
+Adds a new overlay to support the Northwest Digital Radio
+DRAWS and UDRC HATs. See http://nwdigitalradio.com.
+
+Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
+---
+ arch/arm/boot/dts/overlays/Makefile | 2 +
+ arch/arm/boot/dts/overlays/README | 59 ++++++
+ arch/arm/boot/dts/overlays/draws-overlay.dts | 200 +++++++++++++++++++
+ arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 ++++++++++++
+ 4 files changed, 389 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -29,6 +29,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ dionaudio-loco-v2.dtbo \
+ dpi18.dtbo \
+ dpi24.dtbo \
++ draws.dtbo \
+ dwc-otg.dtbo \
+ dwc2.dtbo \
+ enc28j60.dtbo \
+@@ -146,6 +147,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ tpm-slb9670.dtbo \
+ uart0.dtbo \
+ uart1.dtbo \
++ udrc.dtbo \
+ upstream.dtbo \
+ upstream-aux-interrupt.dtbo \
+ vc4-fkms-v3d.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -531,6 +531,59 @@ Load: dtoverlay=dpi24
+ Params: <None>
+
+
++Name: draws
++Info: Configures the NW Digital Radio DRAWS Hat
++
++ The board includes an ADC to measure various board values and also
++ provides two analog user inputs on the expansion header. The ADC
++ can be configured for various sample rates and gain values to adjust
++ the input range. Tables describing the two parameters follow.
++
++ ADC Gain Values:
++ 0 = +/- 6.144V
++ 1 = +/- 4.096V
++ 2 = +/- 2.048V
++ 3 = +/- 1.024V
++ 4 = +/- 0.512V
++ 5 = +/- 0.256V
++ 6 = +/- 0.256V
++ 7 = +/- 0.256V
++
++ ADC Datarate Values:
++ 0 = 128sps
++ 1 = 250sps
++ 2 = 490sps
++ 3 = 920sps
++ 4 = 1600sps (default)
++ 5 = 2400sps
++ 6 = 3300sps
++ 7 = 3300sps
++Load: dtoverlay=draws,<param>=<val>
++Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs
++ input voltage sensor (default 1)
++
++ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage
++ sensor
++
++ draws_adc_ch5_gain Sets the full scale resolution of the ADCs
++ 5V rail voltage sensor (default 1)
++
++ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage
++ sensor
++
++ draws_adc_ch6_gain Sets the full scale resolution of the ADCs
++ AIN2 input (default 2)
++
++ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input
++
++ draws_adc_ch7_gain Sets the full scale resolution of the ADCs
++ AIN3 input (default 2)
++
++ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input
++
++ alsaname Name of the ALSA audio device (default "draws")
++
++
+ Name: dwc-otg
+ Info: Selects the dwc_otg USB controller driver which has fiq support. This
+ is the default on all except the Pi Zero which defaults to dwc2.
+@@ -2117,6 +2170,12 @@ Params: txd1_pin GPIO pin
+ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
+
+
++Name: udrc
++Info: Configures the NW Digital Radio UDRC Hat
++Load: dtoverlay=udrc,<param>=<val>
++Params: alsaname Name of the ALSA audio device (default "udrc")
++
++
+ Name: upstream
+ Info: Allow usage of downstream .dtb with upstream kernel. Comprises
+ vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays.
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/draws-overlay.dts
+@@ -0,0 +1,200 @@
++#include <dt-bindings/clock/bcm2835.h>
++/*
++ * Device tree overlay for the DRAWS Hardware
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
++ fragment@0 {
++ target = <&i2s>;
++ __overlay__ {
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target-path = "/";
++ __overlay__ {
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ udrc0_ldoin: udrc0_ldoin {
++ compatible = "regulator-fixed";
++ regulator-name = "ldoin";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++
++ pps: pps {
++ compatible = "pps-gpio";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pps_pins>;
++ gpios = <&gpio 7 0>;
++ status = "okay";
++ };
++ };
++ };
++
++ fragment@2 {
++ target = <&i2c_arm>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ tlv320aic32x4: tlv320aic32x4@18 {
++ compatible = "ti,tlv320aic32x4";
++ reg = <0x18>;
++ #sound-dai-cells = <0>;
++ status = "okay";
++
++ clocks = <&clocks BCM2835_CLOCK_GP0>;
++ clock-names = "mclk";
++ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>;
++ assigned-clock-rates = <25000000>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpclk0_pin &aic3204_reset>;
++
++ reset-gpios = <&gpio 13 0>;
++
++ iov-supply = <&udrc0_ldoin>;
++ ldoin-supply = <&udrc0_ldoin>;
++ };
++
++ sc16is752: sc16is752@50 {
++ compatible = "nxp,sc16is752";
++ reg = <0x50>;
++ clocks = <&sc16is752_clk>;
++ interrupt-parent = <&gpio>;
++ interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&sc16is752_irq>;
++
++ sc16is752_clk: sc16is752_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <1843200>;
++ };
++ };
++
++ tla2024: tla2024@48 {
++ compatible = "ti,ads1015";
++ reg = <0x48>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ adc_ch4: channel@4 {
++ reg = <4>;
++ ti,gain = <1>;
++ ti,datarate = <4>;
++ };
++
++ adc_ch5: channel@5 {
++ reg = <5>;
++ ti,gain = <1>;
++ ti,datarate = <4>;
++ };
++
++ adc_ch6: channel@6 {
++ reg = <6>;
++ ti,gain = <2>;
++ ti,datarate = <4>;
++ };
++
++ adc_ch7: channel@7 {
++ reg = <7>;
++ ti,gain = <2>;
++ ti,datarate = <4>;
++ };
++ };
++ };
++ };
++
++ fragment@3 {
++ target = <&sound>;
++ snd: __overlay__ {
++ compatible = "simple-audio-card";
++ i2s-controller = <&i2s>;
++ status = "okay";
++
++ simple-audio-card,name = "draws";
++ simple-audio-card,format = "i2s";
++
++ simple-audio-card,bitclock-master = <&dailink0_master>;
++ simple-audio-card,frame-master = <&dailink0_master>;
++
++ simple-audio-card,widgets =
++ "Line", "Line In",
++ "Line", "Line Out";
++
++ simple-audio-card,routing =
++ "IN1_R", "Line In",
++ "IN1_L", "Line In",
++ "CM_L", "Line In",
++ "CM_R", "Line In",
++ "Line Out", "LOR",
++ "Line Out", "LOL";
++
++ dailink0_master: simple-audio-card,cpu {
++ sound-dai = <&i2s>;
++ };
++
++ simple-audio-card,codec {
++ sound-dai = <&tlv320aic32x4>;
++ };
++ };
++ };
++
++ fragment@4 {
++ target = <&gpio>;
++ __overlay__ {
++ gpclk0_pin: gpclk0_pin {
++ brcm,pins = <4>;
++ brcm,function = <4>;
++ };
++
++ aic3204_reset: aic3204_reset {
++ brcm,pins = <13>;
++ brcm,function = <1>;
++ brcm,pull = <1>;
++ };
++
++ aic3204_gpio: aic3204_gpio {
++ brcm,pins = <26>;
++ };
++
++ sc16is752_irq: sc16is752_irq {
++ brcm,pins = <17>;
++ brcm,function = <0>;
++ brcm,pull = <2>;
++ };
++
++ pps_pins: pps_pins {
++ brcm,pins = <7>;
++ brcm,function = <0>;
++ brcm,pull = <0>;
++ };
++ };
++ };
++
++ __overrides__ {
++ draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0";
++ draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0";
++ draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0";
++ draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0";
++ draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0";
++ draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0";
++ draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0";
++ draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0";
++ alsaname = <&snd>, "simple-audio-card,name";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts
+@@ -0,0 +1,128 @@
++#include <dt-bindings/clock/bcm2835.h>
++/*
++ * Device tree overlay for the Universal Digital Radio Controller
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709";
++ fragment@0 {
++ target = <&i2s>;
++ __overlay__ {
++ clocks = <&clocks BCM2835_CLOCK_PCM>;
++ clock-names = "pcm";
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target-path = "/";
++ __overlay__ {
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ udrc0_ldoin: udrc0_ldoin {
++ compatible = "regulator-fixed";
++ regulator-name = "ldoin";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++ };
++
++ fragment@2 {
++ target = <&i2c1>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++ clocks = <&clocks BCM2835_CLOCK_VPU>;
++ clock-frequency = <400000>;
++
++ tlv320aic32x4: tlv320aic32x4@18 {
++ compatible = "ti,tlv320aic32x4";
++ #sound-dai-cells = <0>;
++ reg = <0x18>;
++ status = "okay";
++
++ clocks = <&clocks BCM2835_CLOCK_GP0>;
++ clock-names = "mclk";
++ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>;
++ assigned-clock-rates = <25000000>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&gpclk0_pin &aic3204_reset>;
++
++ reset-gpios = <&gpio 13 0>;
++
++ iov-supply = <&udrc0_ldoin>;
++ ldoin-supply = <&udrc0_ldoin>;
++ };
++ };
++ };
++
++ fragment@3 {
++ target = <&sound>;
++ snd: __overlay__ {
++ compatible = "simple-audio-card";
++ i2s-controller = <&i2s>;
++ status = "okay";
++
++ simple-audio-card,name = "udrc";
++ simple-audio-card,format = "i2s";
++
++ simple-audio-card,bitclock-master = <&dailink0_master>;
++ simple-audio-card,frame-master = <&dailink0_master>;
++
++ simple-audio-card,widgets =
++ "Line", "Line In",
++ "Line", "Line Out";
++
++ simple-audio-card,routing =
++ "IN1_R", "Line In",
++ "IN1_L", "Line In",
++ "CM_L", "Line In",
++ "CM_R", "Line In",
++ "Line Out", "LOR",
++ "Line Out", "LOL";
++
++ dailink0_master: simple-audio-card,cpu {
++ sound-dai = <&i2s>;
++ };
++
++ simple-audio-card,codec {
++ sound-dai = <&tlv320aic32x4>;
++ };
++ };
++ };
++
++ fragment@4 {
++ target = <&gpio>;
++ __overlay__ {
++ gpclk0_pin: gpclk0_pin {
++ brcm,pins = <4>;
++ brcm,function = <4>;
++ };
++
++ aic3204_reset: aic3204_reset {
++ brcm,pins = <13>;
++ brcm,function = <1>;
++ brcm,pull = <1>;
++ };
++
++ aic3204_gpio: aic3204_gpio {
++ brcm,pins = <26>;
++ };
++ };
++ };
++
++ __overrides__ {
++ alsaname = <&snd>, "simple-audio-card,name";
++ };
++};
projects / openwrt / openwrt.git / blobdiff