+++ /dev/null
-From 930c49de8674acda0f143f7bc182ed2fad8c4f9d Mon Sep 17 00:00:00 2001
-From: IQaudIO <gordon@iqaudio.com>
-Date: Mon, 13 May 2019 21:53:05 +0100
-Subject: [PATCH] Added IQaudIO Pi-Codec board support (#2969)
-
-Add support for the IQaudIO Pi-Codec board.
-
-Signed-off-by: Gordon <gordon@iqaudio.com>
----
- arch/arm/boot/dts/overlays/Makefile | 1 +
- arch/arm/boot/dts/overlays/README | 6 +
- .../dts/overlays/iqaudio-codec-overlay.dts | 42 +++
- sound/soc/bcm/Kconfig | 7 +
- sound/soc/bcm/Makefile | 2 +
- sound/soc/bcm/iqaudio-codec.c | 250 ++++++++++++++++++
- 9 files changed, 311 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts
- create mode 100644 sound/soc/bcm/iqaudio-codec.c
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- i2c1-bcm2708.dtbo \
- i2s-gpio28-31.dtbo \
- ilitek251x.dtbo \
-+ iqaudio-codec.dtbo \
- iqaudio-dac.dtbo \
- iqaudio-dacplus.dtbo \
- iqaudio-digi-wm8804-audio.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1160,6 +1160,12 @@ Params: interrupt GPIO use
- touchscreen (in pixels)
-
-
-+Name: iqaudio-codec
-+Info: Configures the IQaudio Codec audio card
-+Load: dtoverlay=iqaudio-codec
-+Params: <None>
-+
-+
- Name: iqaudio-dac
- Info: Configures the IQaudio DAC audio card
- Load: dtoverlay=iqaudio-dac,<param>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts
-@@ -0,0 +1,42 @@
-+// Definitions for IQaudIO CODEC
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2708";
-+
-+ fragment@0 {
-+ target = <&i2s>;
-+ __overlay__ {
-+ status = "okay";
-+ };
-+ };
-+
-+ fragment@1 {
-+ target = <&i2c1>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+
-+ da2713@1a {
-+ #sound-dai-cells = <0>;
-+ compatible = "dlg,da7213";
-+ reg = <0x1a>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&sound>;
-+ iqaudio_dac: __overlay__ {
-+ compatible = "iqaudio,iqaudio-codec";
-+ i2s-controller = <&i2s>;
-+ status = "okay";
-+ };
-+ };
-+
-+ __overrides__ {
-+ };
-+};
---- a/sound/soc/bcm/Kconfig
-+++ b/sound/soc/bcm/Kconfig
-@@ -108,6 +108,13 @@ config SND_BCM2708_SOC_JUSTBOOM_DIGI
- help
- Say Y or M if you want to add support for JustBoom Digi.
-
-+config SND_BCM2708_SOC_IQAUDIO_CODEC
-+ tristate "Support for IQaudIO-CODEC"
-+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
-+ select SND_SOC_DA7213
-+ help
-+ Say Y or M if you want to add support for IQaudIO-CODEC.
-+
- config SND_BCM2708_SOC_IQAUDIO_DAC
- tristate "Support for IQaudIO-DAC"
- depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
---- a/sound/soc/bcm/Makefile
-+++ b/sound/soc/bcm/Makefile
-@@ -18,6 +18,7 @@ snd-soc-hifiberry-dacplusadc-objs := hif
- snd-soc-justboom-dac-objs := justboom-dac.o
- snd-soc-rpi-cirrus-objs := rpi-cirrus.o
- snd-soc-rpi-proto-objs := rpi-proto.o
-+snd-soc-iqaudio-codec-objs := iqaudio-codec.o
- snd-soc-iqaudio-dac-objs := iqaudio-dac.o
- snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o
- snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
-@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D
- obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o
- obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o
- obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
-+obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o
- obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
- obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o
- obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
---- /dev/null
-+++ b/sound/soc/bcm/iqaudio-codec.c
-@@ -0,0 +1,250 @@
-+/*
-+ * ASoC Driver for IQaudIO Raspberry Pi Codec board
-+ *
-+ * Author: Gordon Garrity <gordon@iqaudio.com>
-+ * (C) Copyright IQaudio Limited, 2017-2019
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/gpio/consumer.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/jack.h>
-+
-+#include <linux/acpi.h>
-+#include <linux/slab.h>
-+#include "../codecs/da7213.h"
-+
-+static int pll_out = DA7213_PLL_FREQ_OUT_90316800;
-+
-+static int snd_rpi_iqaudio_pll_control(struct snd_soc_dapm_widget *w,
-+ struct snd_kcontrol *k, int event)
-+{
-+ int ret = 0;
-+ struct snd_soc_dapm_context *dapm = w->dapm;
-+ struct snd_soc_card *card = dapm->card;
-+ struct snd_soc_pcm_runtime *rtd =
-+ snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
-+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+
-+ if (SND_SOC_DAPM_EVENT_OFF(event)) {
-+ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_MCLK, 0,
-+ 0);
-+ if (ret)
-+ dev_err(card->dev, "Failed to bypass PLL: %d\n", ret);
-+ } else if (SND_SOC_DAPM_EVENT_ON(event)) {
-+ ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0,
-+ pll_out);
-+ if (ret)
-+ dev_err(card->dev, "Failed to enable PLL: %d\n", ret);
-+ }
-+
-+ return ret;
-+}
-+
-+static int snd_rpi_iqaudio_post_dapm_event(struct snd_soc_dapm_widget *w,
-+ struct snd_kcontrol *kcontrol,
-+ int event)
-+{
-+ switch (event) {
-+ case SND_SOC_DAPM_POST_PMU:
-+ /* Delay for mic bias ramp */
-+ msleep(1000);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct snd_soc_dapm_widget dapm_widgets[] = {
-+ SND_SOC_DAPM_HP("HP Jack", NULL),
-+ SND_SOC_DAPM_MIC("MIC Jack", NULL),
-+ SND_SOC_DAPM_MIC("Onboard MIC", NULL),
-+ SND_SOC_DAPM_LINE("AUX Jack", NULL),
-+ SND_SOC_DAPM_SUPPLY("PLL Control", SND_SOC_NOPM, 0, 0,
-+ snd_rpi_iqaudio_pll_control,
-+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
-+ SND_SOC_DAPM_POST("Post Power Up Event", snd_rpi_iqaudio_post_dapm_event),
-+};
-+
-+static const struct snd_soc_dapm_route audio_map[] = {
-+ {"HP Jack", NULL, "HPL"},
-+ {"HP Jack", NULL, "HPR"},
-+ {"HP Jack", NULL, "PLL Control"},
-+
-+ {"AUX Jack", NULL, "AUXR"},
-+ {"AUX Jack", NULL, "AUXL"},
-+ {"AUX Jack", NULL, "PLL Control"},
-+
-+ /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */
-+ {"MIC Jack", NULL, "MIC1"},
-+ {"MIC Jack", NULL, "PLL Control"},
-+ {"Onboard MIC", NULL, "MIC2"},
-+ {"Onboard MIC", NULL, "PLL Control"},
-+};
-+
-+/* machine stream operations */
-+
-+static int snd_rpi_iqaudio_codec_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+ int ret;
-+
-+ /* Set bclk ratio to align with codec's BCLK rate */
-+ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
-+ if (ret) {
-+ dev_err(rtd->dev, "Failed to set CPU BLCK ratio\n");
-+ return ret;
-+ }
-+
-+ /* Set MCLK frequency to codec, onboard 11.2896MHz clock */
-+ return snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK, 11289600,
-+ SND_SOC_CLOCK_OUT);
-+}
-+
-+static int snd_rpi_iqaudio_codec_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params)
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ unsigned int samplerate = params_rate(params);
-+
-+ switch (samplerate) {
-+ case 8000:
-+ case 16000:
-+ case 32000:
-+ case 48000:
-+ case 96000:
-+ pll_out = DA7213_PLL_FREQ_OUT_98304000;
-+ return 0;
-+ case 44100:
-+ case 88200:
-+ pll_out = DA7213_PLL_FREQ_OUT_90316800;
-+ return 0;
-+ default:
-+ dev_err(rtd->dev,"Unsupported samplerate %d\n", samplerate);
-+ return -EINVAL;
-+ }
-+}
-+
-+static const struct snd_soc_ops snd_rpi_iqaudio_codec_ops = {
-+ .hw_params = snd_rpi_iqaudio_codec_hw_params,
-+};
-+
-+
-+static struct snd_soc_dai_link snd_rpi_iqaudio_codec_dai[] = {
-+{
-+ .cpu_dai_name = "bcm2708-i2s.0",
-+ .codec_dai_name = "da7213-hifi",
-+ .platform_name = "bmc2708-i2s.0",
-+ .codec_name = "da7213.1-001a",
-+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+ SND_SOC_DAIFMT_CBM_CFM,
-+ .init = snd_rpi_iqaudio_codec_init,
-+ .ops = &snd_rpi_iqaudio_codec_ops,
-+ .symmetric_rates = 1,
-+ .symmetric_channels = 1,
-+ .symmetric_samplebits = 1,
-+},
-+};
-+
-+/* audio machine driver */
-+static struct snd_soc_card snd_rpi_iqaudio_codec = {
-+ .owner = THIS_MODULE,
-+ .dai_link = snd_rpi_iqaudio_codec_dai,
-+ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai),
-+ .dapm_widgets = dapm_widgets,
-+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
-+ .dapm_routes = audio_map,
-+ .num_dapm_routes = ARRAY_SIZE(audio_map),
-+};
-+
-+static int snd_rpi_iqaudio_codec_probe(struct platform_device *pdev)
-+{
-+ int ret = 0;
-+
-+ snd_rpi_iqaudio_codec.dev = &pdev->dev;
-+
-+ if (pdev->dev.of_node) {
-+ struct device_node *i2s_node;
-+ struct snd_soc_card *card = &snd_rpi_iqaudio_codec;
-+ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_codec_dai[0];
-+
-+ i2s_node = of_parse_phandle(pdev->dev.of_node,
-+ "i2s-controller", 0);
-+ if (i2s_node) {
-+ dai->cpu_dai_name = NULL;
-+ dai->cpu_of_node = i2s_node;
-+ dai->platform_name = NULL;
-+ dai->platform_of_node = i2s_node;
-+ }
-+
-+ if (of_property_read_string(pdev->dev.of_node, "card_name",
-+ &card->name))
-+ card->name = "IQaudIOCODEC";
-+
-+ if (of_property_read_string(pdev->dev.of_node, "dai_name",
-+ &dai->name))
-+ dai->name = "IQaudIO CODEC";
-+
-+ if (of_property_read_string(pdev->dev.of_node,
-+ "dai_stream_name", &dai->stream_name))
-+ dai->stream_name = "IQaudIO CODEC HiFi v1.1";
-+
-+ }
-+
-+ ret = snd_soc_register_card(&snd_rpi_iqaudio_codec);
-+ if (ret) {
-+ if (ret != -EPROBE_DEFER)
-+ dev_err(&pdev->dev,
-+ "snd_soc_register_card() failed: %d\n", ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int snd_rpi_iqaudio_codec_remove(struct platform_device *pdev)
-+{
-+ return snd_soc_unregister_card(&snd_rpi_iqaudio_codec);
-+}
-+
-+static const struct of_device_id iqaudio_of_match[] = {
-+ { .compatible = "iqaudio,iqaudio-codec", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, iqaudio_of_match);
-+
-+static struct platform_driver snd_rpi_iqaudio_codec_driver = {
-+ .driver = {
-+ .name = "snd-rpi-iqaudio-codec",
-+ .owner = THIS_MODULE,
-+ .of_match_table = iqaudio_of_match,
-+ },
-+ .probe = snd_rpi_iqaudio_codec_probe,
-+ .remove = snd_rpi_iqaudio_codec_remove,
-+};
-+
-+
-+
-+module_platform_driver(snd_rpi_iqaudio_codec_driver);
-+
-+MODULE_AUTHOR("Gordon Garrity <gordon@iqaudio.com>");
-+MODULE_DESCRIPTION("ASoC Driver for IQaudIO CODEC");
-+MODULE_LICENSE("GPL v2");
projects / openwrt / openwrt.git / blobdiff